Products

Discontinued Products

  • Filter
Category: Accessories
Created on: 30 October 2014

Features Max. Current 3AFor: GPR-U/H/M Series,GPC/GPS/PPE/PPS/PPT/PSS/PST-Series

Created on: 30 October 2014

Features * 32/16 Input Channel * Time Analysis : Up to 200MHz Internal Sampling Rate * State Analysis : Up to 100MHz External Input Clock * Memory Depth : Up to 2Mbits/1Mbits (Half/Full Channels) * Enable Qualifier : High/Low Level Enable and Enable Delay Function * Signal Analyzer : I2C, RS-232C Protocol Analyzer and Signal Statistics * File Export : Signal Data, Operation Setting and Display Image * USB 2.0 Supported(1.1 Compatible)

Created on: 30 October 2014

Features ※ 50000 Counts Display ※ Multi-Function ACV,DCV,ACA,DCA,R,C,Hz,Continuity Beeper,Diode Test,Max/Min,REL,Auto Hold,dBm※ Compare Function※ Dual Display Indicate ACV and Hz,DCV(ACV) and dBm※ DCV and ACV Ripple ※ Manual or Auto Ranging ※ 0.02% DCV Accuracy ※ ACV Measuring Frequency Up to 100kHz ※ 20A Current Range With High Energy Fuse Protection ※ Auto-Recall Settings upon Power ON ※ AC True RMS or AC + DC True RMS ※ RS-232C Interface ※ Option: GPIB Interface

Created on: 31 October 2014

Features The GDM-300/400 Series Hand Held DMM are a compact, high precision, battery operated multimeter series designed to meet most of the daily needs for design engineers as well as service engineers. The GDM-300/400 series design is driven by mobile-oriented features, such as automatic power down to preserve battery life, a large backlight display for crisp viewing, a rotary selector switch and clear-cut push buttons to ease operation. The basic functions match the depth of bench-top multimeters: fuse-protected current input, true RMS for accurate AC measurements, Auto ranging, Duty cycle, and Relative mode. These compact, reliable, and economical devices are ideal for any engineer.

Created on: 31 October 2014

Features For : GPI-625

Created on: 31 October 2014

Features ※ Windows XP Driver ※ Small, Portable, Light and battery Operation ※ Two Types of High Efficient Work; Mode:Stand-Alone Mode, PC Based Mode ※ LCD Display: 16 x 2 Characters ※ Can Set Programming Flow Chart, Voltage, Pulse Width & Other Parameters ※ Powerful HEX/ASCII Memory and Fusemap, Test Library and Full Screen Edit ※ Supported File Format: Binary Code, Intel HEX & 80/86 HEX

Created on: 31 October 2014

Features ※ Easy-operating,Designed for Linear IC (OP, Comparator, Opto-Coupler, Regulator, Special Function Device, Transistor Array) ※ Small, Portable, Light and Power-Saving, Battery Operation ※ Average Search Time : 0.8 Second ※ Display: 16 Characters in 1 Line ※ Test Pin: 14 ~ 24 ※ Test Voltage: +/- 5V ※ Empty-Load and Auto Power Off

Created on: 31 October 2014

Features * 200MHz Bandwidth, Dual Channel, Delayed Sweep * Auto Set * Built-in 6 Digits Counter * Cursor Readout with 7 Measurements * 10 Sets Memory for Front Panel Setting Save & Recall * TV-Line Selection (NTSC, PAL, SECAM) * Panel Setup Lock of Digital-Control Functions * Buzzer Alarm * LED Indicators