|
DEN810-DENT USA RECORDING POWER METER WITH WIFI AND ANTENNA
|
|
Allow you to download data without opening the switch or junction box cover. Any one can steal your power meter until you have this!
>> Measures, Stores and Analyzes 144 Different Electical Parameters Including Volts, Amps, Watts, Volt-Amps (VA), Volt-Amps Reactive (VAR), Kilowatts (kW), Kilowatt Hours (kHW), Power Factor and Harmonics through 63rd |
Power analysers/Power meters
|
|
|
ARH102-Smart Power Meter With Reports (WITH ETHERNET/RS-485)
|
|
Class 0.5 bi-directional energy and full power parameters measurement.
Block or Rolling power demand measurement.
THD, indivisual harmonics, and sag/swell power quality records.
Data logging for alarm, sag, swell events with time-stamped.
Report generation for daily and monthly power usage.
Communication interfaces:Ethernet, RS485.
Communication protocol:Modbus over TCP/IP for Ethernet, Modbus for RS485.
Smart Power Meter with up to 4 channels of re-transmission... |
Power analysers/Power meters
|
|
|
PRO0030-6830 All-Rounded Power and Harmonics Three and Single Phase Analyser
|
|
PRO0030 BASE UNIT POWER AND HARMONICS ANALYZER WITH 3 x 1000A CLAMPS Optional: PRO0041- 3 x 3000A Flexible Clamps Optional: PRO0038- 3 x 100A Clamps |
Power analysers/Power meters
|
|
|
LUT0298-COMPLETE ADVANCED SD CARD GRAPHICAL/ WAVEFORM DATALOGGING 3-PHASE POWER & HARMONICS ANALYSER W 3 X 1200A CLAMP
|
|
Features:
•Analysis for 3 phase multi-power system, 1P/2W, 1P/3W,3P/3W, 3P/4W •3 current probes ( CP-1201 ) are included, if change the current probes, the calibration procedures are not necessary •Current probe input signal/ranges with selection:Input signal (ACV):200 mV/300 mV/500 mV/1 V/2 V/3 VRanges (ACA) : 20 A/200 A/2000 A/30 A/300 A/ 3000 A. •Meter can cooperate the universal current probes •Measurement: V (phase-to-phase), V (phase-to-ground) A (phase-to-ground) KW / KVA /... |
Power analysers/Power meters
|
|
|
LUT0339-COMPLETE SD CARD KWH DATALOGGING 3-PHASE POWER ANALYSER/LOGGER W 3 X 1200A CLAMP - 2 YEARS WARRANTY
|
|
Features:
•Analysis for 3 phase multi-power system, 1P/2W,1P/3W, 3P/3W, 3P/4W •Voltage & Current are the True RMS value. •True Power ( KW、MW、GW ) measurement. •Apparent Power ( KVA、MVA、GVA ) measurement. •Reactive Power ( KVAR MVAR、GVAR) measurement. •Watt-Hour ( WH、SH、QH、PFH ). •Power Factor( PF )、Phase Angle( Φ ). •Voltage measurement range : 10 to 600 ACV •Current measurement range: 0.2A to 1200 ACA. •Programmable CT ratio (1 to 600) and PT ratio... |
Power analysers/Power meters
|
|
|
LUT0163B-Benchtop Power Meter(Watt, VA, Power factor, ACV, ACA, DCV, DCA, VAr, Whr, ohms,)
|
|
0.1 W resolution ( <1000 W ), high precision and high resolution in the low watt range, good performance , for low power LED lamp watt measurement
Supper large LCD, easy to read-out, display the Watt, Power factor, Voltage & Current value at the same time.
Accept different kinds current input signal as direct input, inductive clamp probe or CT ( current transformer ).
Auto range.
Built-in peak hold & data hold function.
RS-232 output interface.
Power supply... |
Power analysers/Power meters
|
|
|
SEW0052B DATALOGGING HEAVY DUTY MULTI-PURPOSE SOCKET ALARM POWER METER (MAX 13A)-230V UK with Alarm/Windows Software(voltage, current, frequency, watt, power factor)
|
|
● Determine the running cost of your appliances.● Measure voltage, current, frequency, watt, power factor, and greenhouse gas emissions.● Optical USB to RS-232 data transmission.● 2 Optical LEDs are built-in for data transfer.● Transferring and showing real-time data to a PC.● Make informed decisions when purchasing appliances and equipment.● Reduce your electricity bill.● Calculate electrical expenses by real, hour, month. ● Can make different... |
Socket testers
|
|
|
PRO0021-6200V3 Graphic Power Clamp for 1-,3-phase (PF,Harmoncs,KWH)
|
|
Analysis for Single Phase and Balanced 3 phase system
True RMS Value (V and I)
Active Power (K,KW,MW,GW)
Apparent (VA,KVA,MVA) and Reactive Power (VAR,KVAR,MVAR)
Power Factor (PF), Phase Angle( Φ )
Energy (WH,KWH,KVARH,PFH)
Programmable PT(1 to 3000)Ratios
Display of Overlapped Voltage and Current Waveform
Maximum Demand (MD in W,KW,MW) with programmable Period
Harmonic Analysis (V and I) to 50th Order
Display of 25 Harmonics in one screen
Optical Isolated RS-232C... |
Power clamps
|
|
|
HIO0006-3286-20 POWER CLAMP METER
|
|
Functionality and Safety Packed into a Handheld Unit
Use as a single-phase power meter
Measure phase on a single-phase line
Simple checking of three-phase lines
Check power supply fluctuations
For harmonic suppression
External output of data to PC
Printer output to 9442 (optional)
|
Power clamps
|
|
|
LUT0366-Clamp power analyser 2000amps 600VAC SD logging (Same as Fluke 345)
|
|
The clamp power analyser is a very economical solution for the analysis of single phase or balanced 3 phase systems with voltages to 600VAC and current to 2000 amps. The product uses the same SD card logging. Readings are logged from every 2 second to 7200 seconds as instantaneous values. It also captures 3 types of transient events with programmable threshold. The display is graphical dot matrix and has many graphic formats including waveform on voltage and current - phasor... |
Power clamps
|
|