|
Sew VOT-50
|
|
FEATURES
● Voltage test: 12V to 690V AC/DC (7 LEDs) with indication by buzzer.● Voltage range: 12V, 24V, 50V, 127V, 230V, 400V, 690V.● Polarity test: LED +/-● Audible continuity test● Self-test button to ensure proper function of the device prior to testing.● Waterproof design, protection class: IP54● Phase / Neutral identification● Integrated storage clips for test probe.● Rubberized injection molding.
... |
Voltage/Continuity Testers
|
|
|
Sew 6500 LC
|
|
FEATURES
● 4-20mA (1kΩ load, 24V Loop Supply).● 0.025% Basic Accuracy.● Simple Operation Interface.● Auto Ramp and Step Functions.● 0-20mA, 0-24mA selectable.● Incremental percentage setting : 0-100%.● Warning beeper when output is open.● 0-24V output.● The minimum load of 20kΩ on voltage mode.
SPECIFICATIONS
DC Current (1kΩ Max Load, 24v Loop Supply)
Range
0-4mA / 4-20mA / 20-24mA
... |
Loop Calibrator
|
|
|
Sew HS-120
|
|
● Used for the extraction of fuses, isolators & fuse switch disconnections.● Can be attached to the 275 HP Proximity Detectors and contact Capacitive Detectors 21× HVD.● Universal "sunrise" head attachment to fit special tool fittings.● Head Section rated at 100kV per 300mm (5 min).● Comes complete with sunrise fitting and fuse extractor.● 3 × 1.8 meter sticks; 1 × 1.2 meter head section.● Sticks 1 × 1.2 meter head section complete with universal sunrise fitting. ●... |
Hot Sticks
|
|
|
Seaward PR11 Phasing Unit
|
|
Neon Phasing Sticks
PHASING RODS WITH NEON-INDICATION FOR USE ON SYSTEMS UP TO 11KV
Seaward HV products on this site are advertised at the list price. Please use the 'Best Quote' link on the right for our discounted price.
Seaward Part No: 113A910
|
PR11 Phasing Stick
|
|
|
Sew ST-150T
|
|
M Series all up to 15A ● Case and Composition:Acrylic resin front and ABS resin case. Four studs mounting. ● Accuracy:Moving coil type : Class 2.0 ... |
M Series
|
|
|
Sew 2310 SL
|
|
FEATURES
● Max. & Min. function.● Over & under range indication.● 4-digit LCD with bar graph.● Frequency weighting characteristic for 2 times per second.● AC signal output.● Low battery indication.
SPECIFICATIONS
Measuring ranges
Lo : 30dB~80dB Med : 50dB~100dB Hi : 80dB~130dB
Accuracy
± 1.5dB(at Reference Range)
Reference sound ... |
Sound Level Meter
|
|
|
Sew HS-120R
|
|
● Single foamed hot stick.● Universal sunrise fitting on the head to fit special tool fittings.● Rated at 100 kV per 300mm (5 minutes).● Can be connected to 275 HP HV proximity detector, 21X HVD capacitive HV detector and 277 HP Non-contact HV detector.● Meets IEC 60855.● Reasonable price.● Accessories
... |
Short Hot Stick
|
|
|
Sew ST-80
|
|
DC up to 50A ● AC up to 50A ● Hz Meter : Measuring Ranges : 45~55 Hz, 45~65 Hz, 55~65 Hz Rated Voltage : 110V, 220V Accuracy : Class 2.0 ● Case and Composition: Acrylic resin front. Bakelite case. Four studs mounting. ● Accuracy :DC : Class 2.0 AC : Class 2.5... |
P Series
|
|
|
Seaward Type L Plus
|
|
Large Jaw Clamp On Ammeter
THE TYPE L PLUS IS IDEALLY SUITED FOR MONITORING MAXIMUM DEMAND IN ELECTRICAL DISTRIBUTION NETWORKS
Seaward HV products on this site are advertised at the list price. Please use the 'Best Quote' link on the right for our discounted price.
Seaward Part No: 275A910
|
Seaward Type L Plus
|
|
|
SEW0028-PD-28V3 HIGH VOLTAGE PROBE (PD28) DC40KV,AC28KV
|
|
*● Measures both AC and DC voltages with digital multitester.
*● Are typically used to measure high voltages in TV sets, power
* supplies and instruments in laboratories.
*● Lightweight and rugged.
*● 2 available contact tips: round needle tip for normal use and a
special flat spring-type for CRT anode. |
High voltage probes
|
|
|
Sew 230 HD
|
|
● Telescopic, compact, lightweight.● High voltage detection.● Self test button feature.● Easy to recognize indication.● High intensity red light emitting diode and intermittent audible sound for easy recognition in full sunlight and noisy environments.● Waterproof. |
H.V. Detectors
|
|
|
Sew 2330 LX
|
|
FEATURES
● Wide range for measurements up 40000 lux and 4000 fc.● 0.01 lux and 0.001 fc resolution for accurate low light level measurements.● Light sensor cover is included for preserving sensor life.● Auto off function.● Data hold and peak hold function.● Low battery indication.● Over range indication.● Auto-ranged.● Manual-ranged.● Calibration mode is provided.● 9V battery system.● Selection key for lux and fc.● The spectral sensitivity... |
Light Meter
|
|
|
Seaward PH3 Proving Unit
|
|
Domed Head Proving Unit
THE SEAWARD PH3 HAS BEEN DESIGNED FOR USE WITH POTENTIAL INDICATORS AND PHASING RODS WITH A DOMED CONTACT ELECTRODE
Seaward HV products on this site are advertised at the list price. Please use the 'Best Quote' link on the right for our discounted price.
Seaward Part No: 112A913
|
PH3 Proving Unit
|
|
|
Sew ST-110
|
|
DC up to 50A ● AC up to 50A ● Hz Meter : Measuring Ranges : 45~55 Hz, 45~65 Hz, 55~65 Hz Rated Voltage : 110V, 220V Accuracy : Class 2.0 ● Case and Composition: Acrylic resin front and Bakelite case. Four studs mounting. ● Accuracy : Moving coil type:Class 2.0 Moving lron type:Class 2.5... |
S Series
|
|
|
Seaward PATGuard Elite 2 PAT software
|
|
Advanced PAT Software
PREMIER PAT SOFTWARE PACKAGE THAT IS IDEAL FOR COMPANIES THAT PAT TEST ON A REGULAR BASIS
This PAT software program provides you with quick and easy, complete management of the PAT testing process.
Seaward Part No: 352A910
|
PATGuard Elite 2
|
|
|
Shock101 Data Logger
|
|
The Shock101 is a high speed, battery powered, stand alone, tri-axial shock data logger. Continuously sampling at 512Hz, this data logger writes the peak acceleration (g force) to memory at the user-specified reading interval.
The Shock101 is specifically designed for documenting dynamic environments such as moving vehicles, trucks, containers, and ships. The device also characterizes environments such as production and assembly lines of delicate equipment, IC fabrication, communications and... |
Shock
|
|
|
Sew ST-45U
|
|
Case and Composition: Acrylic resin front and Bakelite case. Four studs mounting. ● Accuracy :Class 2.0 ● Color:Black case and white scale plate. ● Pointer:Tube type color in red. |
U Series & Thin Edgewise
|
|
|
Sew PD-40AM
|
|
● Measures positive polarity DC voltages up to 40kV.● Lightweight and rugged.● 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode.● Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories. |
H.V. Probe Meters
|
|
|
Sew 188 FFF
|
|
FEATURES
● The 188FFF is a Fuse and Fault Finder which comprises of two parts : The Receiver and the Transmitter.● The Transmitter, draws a current from the mains supply circuit to which it is connected to. The Signal● Current from the Tx is at about 10kHz. The Transmitter is powered by the mains and requires no batteries.● The 10kHz signal current generated by the Transmitter is then searched(sniffed) by the Receiver to... |
Circuit Breaker Identifiers
|
|
|
Sew ST-90U
|
|
Hz Meter : Measuring Ranges : 45~56 Hz, 45~55 Hz, 55~65 Hz Rated Voltage : 110V, 220V Accuracy : Class 2.0 Consumption : Max. 15mA Test Voltage : 2kV. 50-60 Hz ● Case and Composition: Acrylic resin front and Bakelite case. Three studs mounting. ● Accuracy : AC class 2.0 DC class 2.0... |
F Series
|
|