|
Hioki Power Hitester 3193-10
|
|
DC, 0.5 Hz To 1 MHz, 6-Channel 3-Phase 4-Wire Power Meter with Direct and Clamp Sensor Input
Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The 3193-10 is a 6-channel power meter for testing any type of circuit ranging from single-phase lines to three-phase four-wire lines. Based on the voltage, current, and active power measurements, the power meter calculates... |
Power Meters | Power Analyzers | Clamp On Power Meters
|
|
|
LUTRON MS-7011 HUMIDITY CONTENT METER, + type K Temp.
|
|
|
YK SERIES
|
|
|
Hioki Safety HiTester 3258
|
|
World’s First Non-Metallic Contact Voltage Tester Measures 600V With Optimal Safety
Hioki leads the industry in non-metallic contact test and measurement technology that promotes safety on the worksite. The 3258 is a line voltage tester that employs a coupling capacitance cancellation method to measure voltage in AC circuits without requiring metal-to-metal contact. Voltage can be measured safely at practically any location, on either insulated or exposed metal conductors. |
Digital Multimeters (DMM) | Handheld Testers
|
|
|
YOKOGAWA MIXED SIGNAL OSCILLOSCOPES DLM4000
|
|
The DLM4000 is a unique to the industry eight-channel mixed-signal oscilloscope suitable to test and debugging applications in the embedded systems, power electronics, mechatronics, and automotive sectors. Available in both 350 MHz and 500 MHz models, the 2.5 GSa/sec DLM4000 features eight analog input channels. The eighth input channel features Flex MSO which converts to a 8-bit logic analyzer at the push of a button; add sixteen additional logic analyzer inputs as an option, for 24-bit logic... |
MIXED SIGNAL OSCILLOSCOPES
|
|
|
Lutron 50A/50mV SHUNT - ST-50
|
|
|
Adapter Series
|
|
|
Hioki Bare Board HiTester 1231-11
|
|
Semiconductor Package Board Testing System Utilizing Index Table Method
The 1231-11 is an IC package board tester that features high-precision, large-pin capabilities for high-density, fine-pitch boards. |
Bare Board Testing
|
|
|
LUTRON AM-4203HA ANEMOMETER
|
|
Description: ANEMOMETER Model : AM-4203HA * -P circuit, 0.4 to 25.0 m/s. * Max., Min., Memory recall button. * m/s, ft/min, km/h, mile/h, knots, Temp.(oC/oF). * Size : 185 x 78 x 38 mm. |
HA SERIES
|
|
|
TES-1500 Capacitance Meter
|
|
0.5% Accuracy.
Overload Fuse protection.
Test Clips/Direct insert jack for easy measurement.
|
Multimeter
|
|
|
DKK-TOA FPM-377
|
|
PM2.5 Monitor FPM-377
Environment Ministry (JAPAN) Approval
Beta ray attenuation method (mass concentration)
Heater type dehumidifier
VSC cyclone (USEPA approval)
Outdoor type and indoor type available
Meas. range
0 - 500, 0 - 1000, 0 - 5000 μg/m3
|
Particulate Monitor
|
|
|
DKK-TOA NPW-160
|
|
Automated Total Nitrogen/Phosphorus/COD Analyzer NPW-160
Measuring based on official measuring method
Multiple-wavelength detector enables measurement of total nitrogen, total phosphorus and COD simultaneously
Space-saving design attained by eliminating back piping
Drip-proof construction
Meas. range
Total nitrogen: 0 - 2 mg/L to 50 mg/L Total phosphorus: 0 - 0.5mg/L to 20 mg/L COD (UV method): 0 - 2 Abs
|
Automatic Total Nitrogen/Phosphorus/COD Analyzer
|
|
|
3B5700
|
|
150°C ½ AA High Temperature Battery |
Data Logger Batteries
|
|
|
DKK-TOA BPM-2000
|
|
Designed for oil refinery
Automatic fractional distillate analyzer of batch distillation type enables distillation test of petroleum products such as kerosene, diesel oil, gasoline and etc.
Adopts high resolution liquid level detecting sensor
Newly-developed FA computer embedded with large-sized, color touch panel
Explosion-proof TIIS fd2G4 certified
Meas. range
Standard:Light gas oil (0 - 400 degrees C), Kerosene (0 - 300 degrees C), Gasoline (0 - 200degrees C)
|
Boiling Point Analyzer
|
|
|
Sew 4136 mO
|
|
FEATURES
● Microprocessor-controlled.● Four terminal measurement.● Measures down to 100μΩ.● 5 Ranges from 200.0mΩ to 2000Ω.● Maximum resolution of 100μΩ.● Three test currents with over-temperature protection.● Protection against inadvertent connection to over voltage.● Large LCD.● Potential lead resistance and current lead resistance checks.● "Full-featured” EnerSave inside.● EnerSave Auto hold.● EnerSave Auto off.● Lightweight, robust &... |
Milliohm Meters
|
|
|
Sew ST-360TRn
|
|
FEATURES
● Easy to read 3-color scale...for mistake proof reading.● Mirror scale...makes reading pointer easy.● Fuse protection function.● Safety fused...on all ranges.● Diode protected meter...prevents damage due to overload.● hFE and db measurement.● With stand...makes reading and measuring easy.
SPECIFICATIONS
DC volts
0-0.1 / 0.5 / 2.5 / 10 / 50 / 250 /... |
Analogue Multimeters
|
|
|
Fluke 90i-610s 1A to 600A AC/DC Current Probe
|
|
Current Range: 1 to 600 A DC or AC Peak
Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A)
Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A
Frequency Range: 40 Hz to 400 Hz
Working Voltage: 600 V AC rms
Maximum Conductor Diameter: 34 mm (1.34 inch)
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
|
Automotive Accessories
|
|
|
ATAGO PAL-1 Digital Hand-held "Pocket" Refractometer
|
|
With its wide measurement range (Brix 0.0 to 53.0%) the PAL-1 works perfectly in measuring almost any fruit juice, food, or drink, such as soup, sauce, ketchup, tomato sauce, low-sugar jam, or marmalade. |
Digital Hand-Held "Pocket" Refractometer PAL
|
|
|
BANTE PHscan10S Pocket pH Tester
|
|
PHscan10S pocket pH tester is equipped with a standard pH
electrode (Round glass bulb) that used to measure the pH of
non-viscous, non-high temperature liquids, e.g., wastewater,
tap water, drinking water, rainwater, etc.
Features:
2 points push-button calibration with auto-buffer recognition.
Hold function freezes the current displayed value for easy viewing.
Auto-power off feature helps you effectively conserve battery... |
pH Meters
|
|
|
Sew 2734 ER
|
|
● Microprocesser-controlled with advanced safety features.● 4-wire testing only.● Automatic C spike check.● Auto power-off.● Auto data hold.● Large LCD (2000 counts).● Protective terminal cover.
SPECIFICATIONS
Measuring ranges
Earth Resistance 0-20Ω / 0-200Ω / 0-2000Ω Earth Voltage 0-200V AC
Accuracy
Earth Resistance ±2%rdg±3dgt Earth... |
4 Wire Earth Resistance Testers
|
|
|
GAS DNA IR-20 Non-Contact Fixed Infrared Thermometer
|
|
IR-20 non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard current signal output (4~20mA). It can measure from 0 ℃ to maximum 400℃ in the distance of 10:1 D:S (Distance to Spot). Emissivity is 0.95 (fixed). |
Fixed Infrared thermometer
|
|
|
TMT114-CROSS HATCH CUTTER
|
|
Specifications
H cross hatch cutter is applicable to determine the adhesion of organic coatings by cross-hatching.
This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate. The Cross Hatch Cutters conform with the requirements of :BS 3900 E6;BS/EN ISO 2409;ASTM D 3359;GB/T 9286, ,it is economy. Main Technical Parameters: 1.Six working... |
CROSS HATCH CUTTER
|
|