|
SEB0002A- EST754 80KV VOLTAGE DISCHARGE STICK (GERMANY)
|
|
Seba KMT EST 75 High Voltage discharge probe with built-in resistor ensures controlled and reduced discharge of live cables up to 80 kV. The pole is 50 cm long and weighs only 0.95 kg. Resistor is 10kohm and maximum capacitance is 6 uF. Avoid damage to the cables as a result of direct ground / short circuit. Safe discharging of visual grounding. PS: These rods are available in several sizes with voltages up to 150 kV. Please contact us for more information. |
High Voltage Testers
|
|
|
Sew 1152 MF-M
|
|
FEATURES
● High Contrast OLED display.● Designed for viewing in the dark, for mining industry.● Auto-range microprocessor-controlled.● Automatic voltmeter AC/DC at Start/Reset.● Battery test at switch ON/Reset.● Safety voltmeter before each test.● Auto-discharge on all tests and all ranges.● Leads auto-null key.● Test auto-stop.● Smart hold and stop on voltmeter AC/DC.● Ener-Save.● Continuity short circuit >220mA.● Continuity open circuit voltage of... |
Insulation & Multifunction Testers (OLED Display)
|
|
|
SEW0062-2713V3 PUV3 H.V. PROVING UNIT (DCV)
|
|
● Designed to proof: -Phasing sticks. -High voltage detectors (contact type only, not to be used with non contact proximity detectors.) -High voltage and voltage testers.● Battery operated.● Led indicates when power is “ON”.● Small and hand-held.● Quick connection with normal 4mm test leads. |
Proving units
|
|
|
Sew 2126 NA
|
|
FEATURES
● Microprocessor-controlled.● Built-in earth tester.● Built-in loop/psc tester. 0.03-2000Ω (software ctrl).● Built-in voltmeter.● Built-in wiring checker.● One push button smart control.● Display L-N and L-E voltages. 50 to 280Vac (sine).● Display line path impedance. 0.01-2000Ω (software ctrl).● Display earth path impedance. 0.01-2000Ω (software ctrl).● Display neutral path impedance. 0.01-2000Ω (software ctrl).● Display psc line to... |
Electrical Network Analyzers
|
|
|
Sew 179 CB
|
|
FEATURES
Amplifier Probe
● The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation.● Works with any Tone Generator to identify wires.● Volume control for increased sensitivity and adjustable to suit work environment.● Recessed ON/OFF button prevents battery drain.● A phone jack is designed for headset or handset.
Tone Generator
● Tone Generator... |
Cable Tracers
|
|
|
Sew 1810 EL
|
|
FEATURES
● Taut Band movement.● Simple operation.● Wiring check.● Robust.● Can be used on 2 wires L-E (ELCB/RCCB/GFCI tester).● Can be used on 3 wires L-E-N (with wiring check).● No battery required.● Sense automatically 50 or 60 Hz.● Current injected in phase with the voltage.● Other voltage optional (110V).
SPECIFICATIONS
Current settings
... |
Analogue ELCB Testers
|
|
|
Seaward Primetest 100
|
|
Appliance and Socket Tester
THE PRIMETEST 100, POWERFUL APPLIANCE AND SOCKET TESTING AT THE PUSH OF A BUTTON
With a free PAT Training DVD whilst stocks last. Includes full length demonstrations, an online exam and personalised certificate.
Seaward Part No: 344A910
|
PAT Testing Kits
|
|
|
Sew ST-3620
|
|
FEATURES
● 3½ digit liquid crystal display with maximum reading of 1999.● Over range indication : "1" is displayed on highest digit.● Low battery indication: "B" sign appears on the display.● Response time: approx. 1 second.● Data hold: for all ranges
SPECIFICATIONS
AC A
200 / 1500A ±(2.0%rdg+4dgt) (40Hz-1kHz)
AC V
200 / 750V... |
AC Clamp Meters
|
|
|
Sew 4236 ER
|
|
● Microprocessor-controlled.● Earth resistivity (ρ) test.● Earth testing at 20Ω, 200Ω, 2kΩ.● Earth voltage measuring : 0-300V AC.● Automatic C spike check.● Automatic P spike check.● 2-Wire test, 3-Wire test, 4-Wire test.● LCM display.● Auto ranging.● Auto power OFF.● Data hold.● 200 measurement results can be saved in the memory and recalled on the display.● Interval between auxiliary earth spikes is 1.0~50.0m.● Optical USB to RS-232 data... |
4 Wire Earth Resistance & Resistivity Testers
|
|
|
Sew 2804 IN (Ranges: 1kV, 2.5kV, 5kV, 10kV)
|
|
FEATURES
● Microprocessor-controlled.● Four insulation test voltages.● Insulation resistance; auto ranging on all ranges.● Bargraph indicates test voltage; rise and decay can be observed during tests.● Visual and audible warning if external voltage is present.● EnerSave™ feature to extend battery life.● 2 Lines × 16 characters large LCD.● Low battery consumption.● Low battery indicator.● Overload protection.● Auto-off.● Show test time duration... |
Digital (1kV up) H.V. Insulation Testers
|
|
|
Sew 855 PR
|
|
FEATURES
● Two functions in one unit: open phase and phase sequence detection.● Lamps let you determine at-a-glance if phase is open.● Large size alligator clips for easy clipping onto switch-boards terminals.● Checks a wide range of 3-phase power sources.● Special test leads length are available on request.● Push button switch is designed to minimize damage due to negligence.
SPECIFICATIONS
... |
Phase Sequence Indicators (Contact Type)
|
|
|
Sew AL11-C2
|
|
Tip : 2-4 mm● Rating : EN 61010-031:2002 + A1:2008 CAT IV 600V 15A / CAT III 1000V 15A● Red and Black each(set)● Tip : Stainless Steel, sharp tip.● Jack : Nickel Plated, 4mm banana Jack.● The probe tip could screw into crocodile clips.● Probes can be used with all SEW 4mm jack test leads. |
Adapter
|
|
|
Sew ST-2000 V
|
|
Principle : Moving ● Accuracy : ± 0.5% of F.S. ● Scale Length : Approx. 135mm(5-3/8”) ● Weight : Approx. 1.7kg ● Dimension :196(L) x 170(W) x 87(D)mm ● Case Material : Bakelite with glass window |
Portable Instrument
|
|
|
Sew ST-2001 ACV
|
|
FEATURES
● Big-size LCD (112 x 59mm)● Back light function.● Analog scale with Bar-graph for viewing. (100 bars)● 10000 counts (high resolution).● ACV Ranges: 99.99mV~800.0V.● 5 manual ranges controlled by rotary switch.● Data Hold function● Low battery indication● 9V power supply● Best resolution of 0.01mV (10uV)● Precision meter for factory maintenance, field servicing and educational purposes.● Easy to carry handle that doubles as a convenient... |
Digital Portable Panel Meters
|
|
|
Sew ST-3600
|
|
FEATURES
● 3½ digit LCD with maximum reading of 1999.● Over range indication : "1" is displayed on highest digit.● Low battery indication: "B" sign appears on the display.● Response time: approx. 1 second.● Data hold: for all ranges
SPECIFICATIONS
AC A
200 / 1500A ±(2.0%rdg+4dgt) (40Hz-1kHz)
AC V
00 / 750V ±(1.5%rdg+2dgt) (40Hz-1kHz)
DC A
200 / 1500A ... |
AC/DC Clamp Meters
|
|
|
Sew 507 EL
|
|
FEATURES
● High quality movement.● Compact and lightweight; easy to use and store.● Mirror scale: for easier viewing & reading.● Built-in stand makes reading and measuring easy.● 200μA full scale value.● Fuse-protected.● Low battery indication.
SPECIFICATIONS
AC Leakage Current
Measuring range
0.3mA-1mA-3mA-10mA-30mA
Accuracy
±2% of full scale
Input... |
AC & DC Analog Leakage Meters
|
|
|
Sew 1105 ER
|
|
● Capable of measuring earth resistance and earth voltage.● 2mA measuring current permits the testing of earth resistance without tripping earth leakage current breakers in the circuit under test.● In addition to facilitating for precision measurement, test leads for simplified two-wire measuring system also are supplied as standard accessories.● Battery operated.● Battery life indicator. ● Calibration... |
3 Wire (Analogue) Earth Resistance Testers
|
|
|
Sew 1812 EL
|
|
FEATURES
● Microprocessor-controlled.● 2Lines × 16 Characters LCD.● Very low consumption.● Menu-driven.● Accurate digital readout of disconnection time.● Automatic data hold function.● Zero Crossing Circuitry permit testing at 0° or 180°.● Disconnection Phase Polarity shown on LCD display.● Auto-off and off override.● Polarity Trip indicator (Positive of Negative Phase).● Wiring polarity indicator.● Measure voltage and frequency between Line and... |
Digital ELCB Testers
|
|
|
SEA0008-HALO HOOK AMMETER FOR OVERHEAD POWERLINES(United Kingdom)
|
|
Ammeter for overhead powerlines
For use on overhead line systems up to 40 kV
Simple to use membrane switches
LCD display for readout and battery indicator
The Halo has been designed for measuring current flow on overhead line systems up to 40 kV (line to earth). The sensing unit is encased in a moulded plastic housing and is fully screened against the effects of electrostatic fields.The RMS reading digital display is mounted in the fibre glass tubing body of the instrument and has a... |
Current Measurement
|
|
|
Seaward PR33D
|
|
Digital Phasing Unit
PHASING RODS WITH DIGITAL READING FOR USE ON SYSTEM UP TO 33KV
Seaward HV products on this site are advertised at the list price. Please use the 'Best Quote' link on the right for our discounted price.
Seaward Part No: 109A913
|
High Voltage Detection
|
|