You have 0 items in your cart.
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
GW INSTEK GPC Series | Features: Four Digital Panel Meters (GPC-3030DQ)Triple OutputAuto TrackingAuto Series and Parallel OperationConstant Voltage and Constant Current OperationLow Ripple and NoiseInternal Select for Continuous or Dynamic LoadOverload and Reverse Polarity Protection3 1/2 Digits 0.39" LED Display(GPC-3030DQ)3 1/2 Digits 0.5" LED Display(GPC-1850D/3030D/3060D/6030D)5V, 3A Fixed Output(Note: GPC-3060D/6030D are not CE approved) | Linear DC Power Supplies |
|
|
|
GW INSTEK GHT-106R | Features For : GPI-625 | Special Applications |
|
|
|
GRA007-GL220 10 Channel handy-type logger | 10 isolated channels, each with multifunction input Its compact size contains an isolated input system which ensures that signals are not corrupted by inputs to other channels, thus eliminating wiring concerns. The GL220s multi-type inputs are suitable for voltage, temperature, humidity, pulse, and logic signals, enabling combined measurements of different phenomena like temperature/humidity and voltage. TOP Maximum sampling rate of up to 10ms Provides faster sampling... | Datalogger/Recorders |
|
|
|
GRT0023-MS3500 Reinforced Panel For Rough Conditions | Original from USA. Reinforced walk through metal detectors. Please check with salesperson. | Metal Scanners/Locators |
|
|
|
GNA1100A-IAQ-700V2 (CO2, TEMPERATURE, HUMIDITY, VOC, DUST) WIRELESS INDOOR AIR QUALITY MONITOR-MADE IN KOREA | A high accuracy indoor air quality monitor, which measure VOC. CO2, Temperature, Humidity and dust. Through large size of graphic LCD, it provides real-time monitoring and can transmit data wirelessly through built in ZigBee. After install indoor Watch (software), it enable to collect data at a long distance. Relay Contact make it possible to interwork with a ventilating system. It has been installed to measure Air quality of indoor or underground spaces like Factories, schools, Public places... | Carbon Dioxide (CO2) |
|
|
|
GW INSTEK GDS-122 | Features * 20MHz Bandwidth * 100MS/s Real-Time Sampling Rate * True RMS Multimeter: Volt, AMp, Ohm, Continuity, Diode * Dual Independent Floating Isolated Channels* Trigger Mode: Free Run, Single Shot, Edge, Video * USB Interface * 6 Hour Capacity Li-ion Rechargeable Battery * 3.8" Color LCD, Resolution: 320 x 240 * Light Weight: 690g | Digital Oscilloscopes |
|
|
|
GAS DNA 6-IRMAN Non-Contact Fixed Infrared Thermometer | 6-IRman non-contact infrared thermometer measures the amount of infrared energy emitted from object and transmits standard current output signal (4~20mA) or RS-485 communication output signal. Also, it transmits relay contacts for alarm signal. As 6-IRman is composed of infrared sensor head & LCD display with keypad, you can check the temperature value in real-time at the installation site. You can measure the temperature ranged from -20 to max. 600℃ with adjustable measurable... | Fixed Infrared thermometer |
|
|
|
GW INSTEK GDM-8034 | Features: ※ 8 Functions AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Diode Test and Audible Continuity Beeper ※ High Voltage 1000V and 20A Current Range ※ 0.5% Basic DCV Accuracy ※ LCD Display | Digital Meters |
|
|
| GW INSTEK GHT-110 | Features: * For : HSB-001-1, HSB-001-2 | Test Leads / Cables / Probes |
|
||
|
GAS DNA CO Detector CD-10 CO gas detection & alarm unit specialized for underground parking area | CD-10, the artificial intelligent CO gas alarm unit specialized for underground parking area, using electro-chemical sensor, detects CO gas density and provides the measured density signal to both 2 step relay output and standard current signal output (DC 4-20mA) to be connected to various external devices to carry out underground parking area atmosphere environmental monitoring. | Gas Detector |
|
|
|
GW INSTEK GAK-002 | Features * N-Type Cap with Chain* N(P/M)* For : GSP-Series | Adaptors |
|
|
|
GW INSTEK LCR-05 | Features * 4 Wire* Axial & radial lead components support* Suitable for asial & radial lead type L, C, R* For LCR-8101G, LCR-800 Series | LCR Fixtures |
|
|
| GW INSTEK GDS-2000 Series | Features * 200/100/60 MHz Bandwidth * 2/4 Input Channels * 1GSa/s Real-Time and 25GSa/s Equivalent-Time Sampling * Maximum 25k Points Record Length * Large 5.6-in TFT Color Display * USB Host/Device: USB Printer and USB Flash Drive Supported * Battery Operation (optional) * Color Printout | Discontinued Products |
|
||
|
GW INSTEK PSM Series | Features: Single Output Dual Range Max. 200WHigh resolution: 1mV/1mA0.01% load/line regulation, 350uVrms rippleAuto step runing with timer setting and 100 Sets memorySafety design: OVP,OCP & OTP;Output ON/OFF controlSelf-test and software calibrationHighly visible vacuum-fluorescent displayFront and rear output terminalStandard interface : RS-232C, GPIBOption : European Jack Type Terminal | Programmable Linear D.C. Power Supply |
|
|
|
GW INSTEK GFC-8270H/8131H | Features: ※ Frequency and Period Measurement※ High Resolution at Both High and Low Frequency※ 0.01Hz~2.7GHz Frequency Range(GFC-8270H)※ 0.01Hz~1.3GHz Frequency Range(GFC-8131H)※ 10mV rms High Sensitivity ※ 100nHz Resolution for 1Hz Input ※ Variable Trigger Level Control※ Microprocessor Controlled Intelligent Counter(only GFC-8270H) | Other Application Instruments |
|
|
|
GW INSTEK GRA-408 | Features * 19", 4U Rack Mounting* For : PSS-Series | Cases / Bags / Racks |
|
|
|
GW INSTEK GKT-001 | Features: * For RLB-001 Application* Including ADP-002 *2, ATN-100, GTL-303 *2, GSC-002* For : GSP-Series | Special Applications |
|
|
|
GRA002-GL820 20 multi-channel logger (up to 200ch) | It contains an isolated input system which ensures that signals are not corrupted by inputs to other channels, thus eliminating wiring concerns. The GL820s multi-type inputs are suitable for voltage, temperature, humidity, pulse, and logic signals, enabling combined measurements of different phenomena like temperature/humidity and voltage. | Datalogger/Recorders |
|
|
|
GAS DNA SS-100 Two color Non-Contact Fixed Pyrometer | SS-100 two color(Si/Si) non-contact infrared thermometer measures the infrared wavelength emitted from the target and converts it to standard current signal output (4~20mA) or RS-485 communication signal output. It can measure from 800 ℃ to maximum 2400℃ in the distance of 80:1 D:S (Distance to Spot). Emissivity is 0.10 ~ 0.99 adjustable. Two built-in laser pointers can aim at the target. | Fixed Infrared thermometer |
|
|
|
GW INSTEK GDM-300/400 Series | Features: (GDM-452/357/350B)* 4 1/2 Digits 19999 counts (GDM-452)* 3 1/2 Digits 1999 counts (GDM-357/350B)* Manual Ranging* Continuity Beeper/Diode Test* Data Hold* hFE Test (Only GDM-350B)* Temperature Measurement (Except GDM-452)* Capacitance (Except GDM-350B)* Frequency Measurement (Only GDM-452) (GDM-461/397/360/398)* 22000 Counts Auto/Manual Ranging (GDM-461)* 4000 Counts Auto/Manual Ranging (GDM-397/398)* 6000 Counts Auto/Manual Ranging (GDM-360)* Capacitance, Frequency Measurement*... | Digital Meters |
|