You have 0 items in your cart.
DKK-TOA
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
DKK-TOA AQM-210A | Panel Type Resistivity Analyzer AQM-210A Compact DIN 96 size Best suited for water quality control in ultra-pure water production lines Two detectors connectable RS-232 equipped as standard specification Output: 2-channel, insulated, 4 - 20mA Meas. range 0.00 - 20.00 MΩ・cm | Panel Type Resistivity Analyzer for Ultra-Pure Water |
|
|
|
DKK-TOA AR4/AR5 Series | Compact 2-electrode type (titanium) detector designed for ultrapure water Pipeline insertion type, leadless type Two types of cell constants available: 0.01, 0.1 cm-1 Meas. range 0 - 20/200 MΩ·cm 0 - 0.2/2 μS/cm | Industrial Conductivity Detector |
|
|
|
DKK-TOA AUT-701 | Dual system allows for 2-channel simultaneous titration Strong&Float high performance electrodes USB(Host) and LAN equipped as standard specification Validation supporting function Turntable, auto-sampling system and etc. connectable | Automatic Titrator |
|
|
|
DKK-TOA BHC-7C | Immersion Type pH/ORP Detector with Brush Cleaner BHC-7C Immersion type pH/ORP electrode holder with cleaning brush (BHC-7C) The swing movements wash the electrode tip and prevent it from fouling One-touch detachable holder and easy maintenance | Immersion Type pH/ORP Detector with Some Cleaners |
|
|
|
DKK-TOA BMR-24 | Compact and lightweight model in accordance with DIN standard DC 24V power supply designed for 4-point alarm and 2-wire transmitters Often used as a receiver of 2-wire or 4-wire transmitter (such as pH/ORP meters, conductivity analyzers and DO meters) Meas. range pH meter: pH; 0 - 14 70divisions (to be specified otherwise) | Bar Graph Meter Relay |
|
|
|
DKK-TOA BPM-2000 | Designed for oil refinery Automatic fractional distillate analyzer of batch distillation type enables distillation test of petroleum products such as kerosene, diesel oil, gasoline and etc. Adopts high resolution liquid level detecting sensor Newly-developed FA computer embedded with large-sized, color touch panel Explosion-proof TIIS fd2G4 certified Meas. range Standard：Light gas oil (0 - 400 degrees C), Kerosene (0 - 300 degrees C), Gasoline (0 - 200degrees C) | Boiling Point Analyzer |
|
|
|
DKK-TOA BSC | A complete sampling system composed with cooler, pressure reducer, valves, flowmeter and thermostat chambers Enables sampling for analysis from the boiler Consistent manufacturing from analyzer to sampler Sample condition Maximum temperature: 600 degrees C Maximum pressure: 30 MPa Maximum flow rate: 3 L/min | Boiler Sampling System |
|
|
|
DKK-TOA CD-36D/38D | Measures free residual chlorine of chlorinated samples from purification/food processing/semiconductor plants and pool without reagent Continuous measurement by polarographic method Meas. range CD-36D: 0 - 2 mg/L (ppm) CD-38D: 0 - 100 mg/L (ppm) | Reagentless Free Chlorine Analyzer |
|
|
|
DKK-TOA CFPP | Designed for oil refinery Continuous measurement of plugging pour point which is used as indication of light oil and intermediate fraction of fuel oil A Best suited for management of plant and product control Explosion-proof TIIS d2G4 certified Meas. range -30 - +20 degrees C | Cold Filter Plugging Point Analyzer |
|
|
|
DKK-TOA CGP-31 | Enables measurement of CO2 in both liquid phase and gas phase Wide measurement range(0.1 - 100%) Membrane electrode allows for reliable measurement Power-saving design; rechargeable battery adaptable Waterproof design(IP67: 1m depth, up to 30mins) Meas. range Liquid phase: 1.49 - 1490 mg/L Gas phase: 0.1 - 100% | Portable Carbon Dioxide Meter |
|
|
|
DKK-TOA CGS-12 | Calibration Gas Generator CGS-12 Calibrator for SO2/NOX/CO analyzers Built-in zero gas generator enables suction of ambient air & purification into zero gas Concentration of span gas (calibration) is freely adjustable between 1:100 & 1:10000 of component gas concentration | Calibration Gas Standards Generator |
|
|
|
DKK-TOA CLBM-50 | Residual Chlorine Analyzer CLBM-50 Ultracompact DIN 48 size Reagenless model Auto-cleaning by polishing beads and micro-vibrating electrode Power supply: 100 - 230VAC Low power consumption of 5VA Meas. range 0 - 3 mg/L | Reagentless Free Chlorine Analyzer |
|
|
|
DKK-TOA CLF-120 | Reagentless Residual Chlorine Analyzer CLF-120 Measures total residual chlorine of drainage water without reagent Continuous measurement by polarographic method Meas. range 0 - 0.5/1.0, 0 - 1/2, 0 - 2/3 mg/L (ppm) | Reagentless Free Chlorine Analyzer |
|
|
|
DKK-TOA CLF-1600 | Measures residual chlorine (total or free) happened in the water chlorination process Continuously measurement with polarographic method 1/5 reagent requirement of existing models RS-485 equipped as standard specification; compatible with Modbus communication system Freely mountable on walls, racks, etc. for the compact lightweight design Meas. range 0 - 0.5/1.0 to 0 - 5/10 mg/L (ppm) (2-range) | Residual Chlorine Analyzer |
|
|
|
DKK-TOA CM-20J | Easy-to-read LCD display AC/DC 2-way power supply SI unit display supported (S/m and S/cm) Cost-effective designed in a compact size Meas. range 0 - 20.00 S/m | Conductivity Meter |
|
|
|
DKK-TOA CM-25R | Low-cost basic model Easy-to-read large customized LCD display External printer connectable Data storage up to 300 points Compliant with USP<645> requirements Meas. range 0 - 200.0 S/m 0 - 20.00 MΩ･m Chloride 0 - 4.00％ 0 - 100.0 degrees C | Conductivity Meter |
|
|
|
DKK-TOA CM-30R | JP16 (The Japanese Pharmacopoeia 16th edition) conformity and stable electric conductivity measurement Built-in pure water temperature compensation USB (Host) and LAN equipped as standard specification Compliant with USP<645> requirements Meas. range 0 - 200.0 S/m 0 - 20.00 MΩ･m Chloride 0 - 4.00％ Concentration 0 - 200％ 0 - 100.0 degrees C | Conductivity Meter |
|
|
|
DKK-TOA CM-31P（for standard use） / CM-31P-W（for pure water） | Display of salinity (NaCl) is available (CM-31P) Highly accurate measurement in pure water attainable with the pure water temperature compensation function (CM-31P-W) Power-saving design; rechargeable battery adaptable Waterproof design (IP67: 1m depth, up to 30mins) Meas. range (when using a standard cell) 0.1 mS/m - 10 S/m 0.1 Ω·m - 10k Ω·m Salinity: 0 - 4.00% 0 - 80℃ | Handheld Electrical Conductivity Meter |
|
|
|
DKK-TOA CNBM-100A（Panel Type） | Simplified Cyanide Ion Monitor CNBM-100A（Panel Type） Compact DIN 96 size unit One-touch calibration done with standard solution Auto-detection of electrode deterioration Automatic detection of electrode error during the measurement Meas. range 0.00 - 9.99 mg/L | Simplified Cyanide Ion Analyzer |
|
|
|
DKK-TOA CNBM-160（Field Installation Type） | Simplified Cyanide Ion Monitor CNBM-160（Field Installation Type） Outdoor field installation model One-touch calibration done with standard solution Auto-detection of electrode deterioration Automatic detection of electrode error during the measurement Meas. range 0.00 - 9.99 mg/L | Simplified Cyanide Ion Analyzer |
|