|
Fluke BE9005 Battery Eliminator
|
|
7.5V dc battery eliminator for operation of calibrator from 120 volt AC line
UL/CSA recognized
For use in North America; 120V ac 60 Hz lines
3.8" x 2.5" x 2.2" (96 mm x 63 mm x 56 mm); 72" (1.8m) cord
Weight: 1 lb/0.5 kg
One year warranty
|
Batteries, Charges and Adapters
|
|
|
Fluke PM8907 Line Voltage Adapter/Battery Charger
|
|
Mains (Line Voltage) - 801 (Europe) 230V ± 10% - 803 (North America) 120V ± 10% - 804 (United Kingdom) 230V ± 10% - 806 (Japan) 100V ± 10% - 807 (Australia) 240V ± 10% - 808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 is equipped with a male receptacle plug that must be connected to a line cord appropriate for local use.
Line cord not included
A North American line plug adapter is included
|
Batteries, Charges and Adapters
|
|
|
Fluke PM8907 Line Voltage Adapter/Battery Charger
|
|
Mains (Line Voltage) - 801 (Europe) 230V ± 10% - 803 (North America) 120V ± 10% - 804 (United Kingdom) 230V ± 10% - 806 (Japan) 100V ± 10% - 807 (Australia) 240V ± 10% - 808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 is equipped with a male receptacle plug that must be connected to a line cord appropriate for local use.
Line cord not included
A North American line plug adapter is included
|
Batteries, Charges and Adapters
|
|
|
Fluke TI-CAR Charger
|
|
For the ultimate flexibility in the field - recharge your thermal imager wherever and whenever you need to
For use with: Ti32, Ti25, Ti10, TiR32, TiR1, TiR
|
Batteries, Charges and Adapters
|
|
|
Fluke PM9080 Optically Isolated RS-232 Adapter
|
|
Safety designed serial interface for digital hard-copy output to serial printer or remote control and data exchange with a PC.
Compatible with all Fluke ScopeMeter® test tools, with Power Quality Analyzers, Graphical MultiMeters and MultiFunction Counters.
Hard Copy: ScopeMeter test tools support Epson FX/LQ Series, LaserJet and DeskJet compatible printers
Remote control: Waveforms, Scope and Meter measurements, Front Set-ups and performance verification/calibration
Transfer rate:... |
Batteries, Charges and Adapters
|
|
|
Fluke SV225 Stray Voltage Adapter
|
|
Stray voltage can appear in electrical installations, due to the capacity between wires
This may result in erroneous readings on high impedance meters
The SV225 solves this without compromising safety
On energized wires, the meter will indicate the real voltage
On non-energized circuits the meter will read close to zero (even if there are stray voltages)
It can be used with all modern meters with standard input spacing.
Rated CAT III 1000V, CAT IV 600 V
|
Batteries, Charges and Adapters
|
|
|
Fluke 884X-ETH Ethernet Interface Cable
|
|
8-conductor (4 twisted pair) unshielded cable (48 inches) with an 8-position modular plug (RJ45) on each end, with an overmold boot/strain relief
Rated working voltage: 100 V rms maximum
Operating temperature range: -40 ºC to +80 ºC
|
Cables & Hardware
|
|
|
Fluke OC4USB USB Interface Cable
|
|
Supports the Fluke 120 Series, Fluke 190 Series ScopeMeters, as well as the 43 and 43B and 430 Series Power Quality analyzers
Supports Windows Vista/ XP/2000/Me/98 SE
Cable length 1.5 m (4.9 ft)
|
Cables & Hardware
|
|
|
Fluke PM9080 Optically Isolated RS-232 Adapter
|
|
Safety designed serial interface for digital hard-copy output to serial printer or remote control and data exchange with a PC.
Compatible with all Fluke ScopeMeter® test tools, with Power Quality Analyzers, Graphical MultiMeters and MultiFunction Counters.
Hard Copy: ScopeMeter test tools support Epson FX/LQ Series, LaserJet and DeskJet compatible printers
Remote control: Waveforms, Scope and Meter measurements, Front Set-ups and performance verification/calibration
Transfer rate:... |
Cables & Hardware
|
|
|
Fluke PM9092/001 50 Ohm Coaxial BNC cable set (3 x 0.5m)
|
|
50 Ohm Coaxial BNC cable set, 3 x 0.5 m.
Three colored BNC male connectors (red, gray, and black) for easy identification.
|
Cables & Hardware
|
|
|
Fluke C115 Soft Carrying Case
|
|
Includes two padded pockets for protection of two test tools, such as a digital multimeter and 60 Series IR thermometer and a pouch for test leads and other accessories.
Durable polyester 600D case construction for long life.
Compatible with Fluke 20, 70, 11X, 170 Series digital multimeters and other similar format test tools.
One-year warranty.
|
Cases and Holsters
|
|
|
Fluke C116 Soft Carrying Case
|
|
Includes adjustable padded space with a moveable Velcro divider for protection of two test tools, such as a digital multimeter and a current probe.
Durable polyester 600D case construction for long life.
Compatible with Fluke 20, 70, 11X, 87V, 170 Series digital multimeters and other similar format test tools.
One-year warranty.
|
Cases and Holsters
|
|
|
Fluke C125 Soft Carrying Case with Detachable Accessory Pouch
|
|
Zippered carrying case with detachable external pouch.
Additional pouch is designed to carry test leads and probes.
Convenient belt loop accommodates tool belt.
|
Cases and Holsters
|
|
|
Fluke C12A Soft Carrying Case
|
|
Zippered carrying case with inside pockets and belt loop
One year warranty
|
Cases and Holsters
|
|
|
Fluke C1600 Gear Box for Meter and Accessories
|
|
Deep interior large enough to hold and protect your gear and leaves room for accessories and other essentials.
Rubber gasket in lid seals out dust and keeps contents dry.
Lift out tray keeps everything organized.
Snap open compartment on top of lid for easy access to small parts such as fuses, batteries, probes and leads.
Includes five hook and loop straps to wrap cords and test leads when not in use.
Can be locked.
Large carry handle for comfortable hauling
|
Cases and Holsters
|
|
|
Fluke C195 Large Soft Case
|
|
Zippered carrying case with storage compartments.
Allows hand or shoulder use
One year warranty
|
Cases and Holsters
|
|
|
Fluke C23 Soft Carrying Case
|
|
Zippered carrying case with durable vinyl exterior
Has belt loop and an inner pocket to store test leads or small accessories
Ideal companion case to:
Fluke 61 & 65 Infrared Thermometers
Fluke 320 series Clamp Meters
1 year warranty
|
Cases and Holsters
|
|
|
Fluke C25 Large Soft Case for most DMMs with Holsters
|
|
Zippered carrying case with padding and inside pocket.
1 year warranty
|
Cases and Holsters
|
|
|
Fluke C280 Soft Carrying Case
|
|
Durable polyester 600D case construction for long life
Inner front pocket with closure and dual pouch pockets for test tools and accessories
Compatible with Fluke 287 and 289 DMMs or other similar format test tools
Includes detachable, extendable shoulder strap
|
Cases and Holsters
|
|
|
Fluke C33 Soft Vinyl Carrying Case
|
|
Zippered carrying case with durable vinyl exterior
Has belt loop and an inner pocket to store test leads or small accessories
Companion case to:
Fluke T100 series Voltage and Continuity Testers
Fluke 330 series Clamp Meters
Fluke T5 Electrical Tester
1 year warranty
|
Cases and Holsters
|
|