|
Sew 6200 IN (Ranges: 2.5kV, 5kV)
|
|
FEATURES
● Microprocessor-controlled.● High quality Taut Band movement.● Two insulation test voltages.● Insulation resistance, auto ranging on all ranges.● Low Battery LED indication.● Beeper warning of external voltage.● Fully protected : crow bar.● Housed in carry case.
SPECIFICATIONS
Test voltage (DC V)
2500V
5000V
Measuring ranges
0-100GΩ
0-200GΩ
... |
Analogue (1kV up) H.V. Insulation Testers
|
|
|
GW INSTEK GDS-1000-U Series
|
|
Features
* 100/70/50 MHz Bandwidth with 2 Input Channels* 250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling * 4k Memory Length per Channel * Peak Detect as Fast as 10ns * Save/Recall of 15 Front Panel Settings & Waveforms * 5.7" TFT Color Display * 19 Auto Measurements * Arithmetic Operators - Add, Subtract, FFT * USB Port for PC Connection* Data Logger * Limited Lifetime Warranty
|
Digital Oscilloscopes
|
|
|
GW INSTEK GDS-1000A-U Series
|
|
Features
* 150/100/70MHz Bandwidths* 1GSa/s Real-Time Sample Rates Maximum, 25GSa/s Equivalent-Time* 2Mega Points Record Length* 2mV~10V Vertical Scale* 1ns~50s Horizontal Range* Up to 27 Automatic Measurements* 5.7" TFT LCD Display* USB Host and Device Interface Supported* Go/NoGo Function* Data Logger* Limited Lifetime Warranty |
Digital Oscilloscopes
|
|
|
DKK-TOA HM-30P / 31P
|
|
Standard model for pH measurement (HM-30P)
Sophisticated type, capable of pH and ORP measurements (HM-31P)
Power-saving design; rechargeable battery adaptable
Waterproof design (IP67: 1m depth, up to 30mins)
Data storage up to 1000 points
Meas. range
pH 0 - 14 (HM-30P/31P) 0 - 100.0 degrees C (HM-30P/31P) 0 - ±2000 mV (HM-31P) (ORP electrodes sold separately) |
Handheld pH/ORP Meter
|
|
|
Sew 1151 IN
|
|
FEATURES
● Microprocessor-controlled.● Automatic voltmeter AC/DC at Start/Reset.● Auto range● Auto off.● Battery test.● Battery test at Switch ON/Reset.● Safety voltmeter before each test.● Auto discharge on all test and all ranges.● Leads Auto-null key.● Test Auto-stop.● Smart hold & stop on voltmeter ac/dc.● Ener-Save feature to extend battery life.● Continuity short circuit current > 220mA.● Continuity open circuit voltage of 5Vdc.● Nominal... |
Insulation & Multifunction Testers (LCD Display)
|
|
|
Guide
|
|
|
Distance meters
|
|
|
Sew 1824 LP
|
|
FEATURES
● Microprocessor-controlled.● Measures Earth Resistance without the need for poles in the ground or external measuring wires.● Earth measurement uses the real earth current path and the current generated by the electric network, without the need for any disconnection.● The Earth Resistance displayed is exactly the earth resistance that the earth current will need to... |
Loop Testers
|
|
|
DKK-TOA MWB4-70
|
|
B4 size compact analyzer excellent in reliability, durability and maintainability
Enables continuously measurement of turbidity, color, residual chlorine, pH, conductivity, temperature and pressure without reagents
Equipped with interactive easy-to-use color touch panel
|
Automatic Water Quality Analyzer for City Water
|
|
|
DKK-TOA MDM-135A (2-wire)
|
|
Electromagnetic Conductivity Transmitter MDM-135A (2-wire)
Electromagnetic conductivity analyzer for field installation in a compact and rigid aluminum enclosure
Made for accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali)
Alterable output range
Meas. range
Minimum : 0 - 2 mS/cm Maximum : 0 - 2000 mS/cm
|
Transmitter for Electromagnetic Conductivity Analyzer
|
|
|
DKK-TOA AQM-100A
|
|
Resistivity Analyzer for Ultra-Pure Water AQM-100A
Compact DIN 96 size
Best suited for water quality control in ultra-pure water production lines
Two detectors connectable
Meas. range
0.00 - 20.00 MΩ・cm
|
Panel Type Resistivity Analyzer for Ultra-Pure Water
|
|
|
Sew 165 CB
|
|
FEATURES
Multi-purpose Cable Tester
● 165 CB is an ideal tool which can test the correct pin configuration for different kinds of cables.● For testing: -RJ45/RJ11 -USB -COAX -BNC cable -Multi-wire cable● Auto-scan and manual-check function● Buzzer sound warning for wire status● 2 LED module indicators on the master unit which can do both of transmitter and receiver functions... |
Cable Tester and Cable Tracer
|
|
|
DKK-TOA XAT-200 series
|
|
Process analyzer for automating analytical techniques such as atomic absorption and etc.
Suitable for automating chemical analysis processes such as distillation, heat treatment, etc.
Example applications:
*Total chromium *Total cyanide by atomic absorption/distillation *Phenols by atomic absorption/distillation *Total mercury by oxidation-reduction atomic absorption |
Automatic Process Analyzer
|
|
|
DKK-TOA BSC
|
|
A complete sampling system composed with cooler, pressure reducer, valves, flowmeter and thermostat chambers
Enables sampling for analysis from the boiler
Consistent manufacturing from analyzer to sampler
Sample condition
Maximum temperature: 600 degrees C Maximum pressure: 30 MPa Maximum flow rate: 3 L/min
|
Boiler Sampling System
|
|
|
DKK-TOA OBM-102A
|
|
Panel type DO analyzer in a compact DIN 96 size
One-touch calibration and various self-diagnostic functions
2-point contacts signal, 4 - 20mA output (RS-232 optional)
Power supply: 90 - 264VAC, 50/60Hz
Meas. range
Minimum : 0 - 1 mg/L Maximum: 0 - 50 mg/L
|
Panel Type DO Analyzer
|
|
|
DKK-TOA WDM-135A (2-wire) / WDM-136A (4-wire)
|
|
Industrial Conductivity Transmitter WDM-135A (2-wire) / WDM-136A (4-wire)
Easy-to-use conductivity analyzer for field installation in a compact and rigid aluminum enclosure
Wide application range from ultra-pure water to wastewater
Alterable output range
Meas. range
Minimum: 0 - 0.2 μS/cm Maximum: 0 - 20 mS/cm |
Transmitter for Industrial Conductivity Analyzer
|
|
|
Sew ST-375
|
|
FEATURES
● Designed for measuring AC current, AC voltage resistance and DC voltage .● Rotary scale which presents only one scale in windows at one time to avoid any possible reading errors.● Pointer lock function freezes the reading in dimly lit or hard to reach places.● Ω range ideal for checking the continuity or relays, transformers and motor coils.
... |
Rotary Scale Clamp Meters
|
|
|
LUTRON CM-9941 SMART CLAMP METER
|
|
Description: SMART CLAMP METERModel : CM-9941* Smart operation, 3 intelligent function : A, V, Ohm.* V: ACV, DCV measurement automatically.* Ohm: Ohm, Diode, Continuity, Cap. automatically.* A: ACA (600A, 400A).'* Frequency measurement.* 4,000 counts, 30 mm conductor size.* Size : 178 x 64 x 33 mm. |
NEW PRODUCTS 2009
|
|
|
Sew TEL-1-1 110V
|
|
FEATURES
● The TEL1 is the Basic Test Equipment an Electrician cannot do without. TEL1 is a Dual Function Test Instrument utilized to Verify Electrical Wiring Connections and the Functioning of Earth Leakage / Residual Current Detectors devices by forcing the ELCB/RCD to trip.
SPECIFICATIONS
Nominal Voltage System
110V-220V-230V-240Vac... |
General ELCB Testers
|
|
|
DKK-TOA BMR-24
|
|
Compact and lightweight model in accordance with DIN standard
DC 24V power supply designed for 4-point alarm and 2-wire transmitters
Often used as a receiver of 2-wire or 4-wire transmitter (such as pH/ORP meters, conductivity analyzers and DO meters)
Meas. range
pH meter: pH; 0 - 14 70divisions (to be specified otherwise)
|
Bar Graph Meter Relay
|
|
|
DKK-TOA WQMS-CW
|
|
Designed for environmental water measurings such as rivers, lakes, and other water bodies
Built-in automatic cleaning and calibration function greatly reduce maintenance work
Sensor-integrated design shrinks the unit size and space-saving
Measurement items
Temperature, pH, Electrical Conductivity, Turbidity, DO(Dissolved Oxygen)
|
Automatic Water Quality Monitor
|
|