TST0092 535, CO2 measuring instrument with permanently attached probe, batteries and calibration protocol Long-term stable 2 channel infrared sensor Highly accurate, highly efficient Repeated calibration is unnecessary TST0092 535, CO2 measuring instrument with permanently attached probe, batteries and calibration protocol Long-term stable 2 channel infrared sensor Highly accurate, highly efficient Repeated calibration is unnecessary
Complete environmental monitor and alarm - Wall-Mounted LED type, easy reading - Alarm set for Hi and Low limit-Temperature and Humidity - Data Logging Capacity 30,000 records - LED displays real time data - USB interface- XL Display: 260 x 178 x 47mm- High Accuracy and high sensitivity
Features One button operation - Click and “GO” button instantly starts logging and recording. TWO standard interfaces - Mini USB and SD card for easiest direct communication with your PC - no added interface required. Large display w/ one button backlight - For easily viewing data in poorly lit areas. Longer battery life - Designed to conserve energy for data recording without interruption. Up to 3 years battery life. Standard battery (AA) replaceable by user. Larger memory - Collect up to 2 million measurements. FREE Programming and Analysis Software Fully protected data Rugged design for everyday use
Model No.: : ST-105 Product Description - Statistic analysis. - 24HR measurement. - Integral measurement. - Real time analyzer in 1/1 and 1/3 octave band. - Simultaneously measures A, C, Z and F, S, Impulse. - Measurement function: Lxyp, (Lxyi), Lxeq,1s, Lxeq, T, LAE, E,Cpeak+, Cpeak- , LAFmax, LAFmin, LAFeqT, LASeqT, LAIeqT, Laeq(20Hz~200Hz). - USB Datalogger with 128 records capacity. - Real time clock with calendar. - Sampling Frequency: 20.8us(48KHz). - Wide Frequency range: 10Hz~20KHz. - Wide measurement range: 25dB~140dB. - Wide dynamic range:90 dB. - Fast, Slow, Impulse, PeakC+, PeakC - A /C /Z Frequency weighting. - Optional mini-printer for the analytical result printing. - 5 Languages software (English / Chinese / Spanish / German / Italian) .
Specifications H cross hatch cutter is applicable to determine the adhesion of organic coatings by cross-hatching. This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate. The Cross Hatch Cutters conform with the requirements of :BS 3900 E6;BS/EN ISO 2409;ASTM D 3359;GB/T 9286, ,it is economy. Main Technical Parameters: 1.Six working side blades:When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to change blade. 2.Multi-cutting blades spacing:1mm/2mm/3mm 3.The number of square:25squares/100squares