The 701927 is a 50:1 or 500:1 high voltage (1400V peak) probe with extended bandwidth covering DC to 150MHz, This probe provides a balanced differential input, to be used with oscilloscopes with single-ended inputs (1 MΩ Input Impedance). This probe works with DLM2000, DLM4000, DL6000, DLM6000, DL9000 and SB5000. This probe is conveniently powered by the Yokogawa Probe Interface I/F.
Frequency bandwidth: DC to 100 MHz Maximum continuous input range: 1400 Volts Attenuation Ratios: 100:1 or 1000:1 Functions with Digital Oscilloscopes, ScopeCorders or other waveform measuring instruments.
Frequency bandwidth: DC to 50 MHz Maximum continuous voltage input: 7,000 Volts Attenuation ratios: 1000:1 or 100:1 Functions with Digital Oscilloscopes, ScopeCorders or other waveform measuring instruments.
Frequency bandwidth: DC to 15 MHz Maximum continuous input range: 1000 Volts Attentuation Rations: 100:1 or 10:1 Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments.
Differential Probe, 12Vp Differential, 30Vp Common-Mode, 500MHz, 10:1, 100kΩ w/ built-in LEMO lead pig-tail Works with all scopes with BNC Input w/ 50Ω Input Termination. Requires 50Ω scope or use 700976 50Ω terminator. Requires /P2/P4 LEMO option or external probe power supply.
The 701922 is a 10:1 Differential Probe rated at 20Vpeak differential voltage input and 60Vpeak Common-Mode input with 200MHz bandwidth (-3dB). This probe is recommended for CAN bus and can be used with virtuallly any oscillscope with an internal 50Ω termination or use the external 50Ω 700976. This probe is powered via a built in pig-tail LEMO lead. This probe can be powered with Yokogawa scope option /P2 or /P4, or an external power supply 700938-3-D or 701934-D. The probe is supplied with one each pinchers, B9852MF black and B9852MG red and a 50cm ground extension.
PBD2000 Differential Probe, 5Vp Differential, 7Vp Common-Mode, 2GHz, 10:1, 50kΩ. Fits Yokogawa scope Probe Interface only: DLM2000, DL6000, DLM6000, DL9000, SB5000