Hioki Can Adapter 8910

Convert CAN Bus Signals Across 12 Channels and Further Analyze Using Recorders or Data Loggers

CAN (Controller Area Network) Bus is an automotive bus standard or protocol designed to allow microcontrollers and devices to communicate with each other within a vehicle without a host computer, allowing vehicle systems and sensors to communicate at very high speeds and minimizing the wiring in the vehicle. The 8910 CAN Adapter accepts signals from a CAN Bus and converts them to analog or logic signals readable by Hioki Memory HiCorders for further analysis.

Select CAN Bus information and convert the signals into analog/logic signals to input into your recorder or data logger
• Record both CAN adapter analog output and actual analog data (e.g., sensor output) simultaneously

Basic specifications (Accuracy guaranteed for 1 year)

Input CAN-Bus interface2-channel (Receive only)
Number of output channels Up to 12 analog channels and 6 logic channels - 24bit
Output resolution 16 bit
Output voltage -5 to 5V (Analog), 0 to 5V (Logic)
Response speed Can follow up to a 1ms CAN-Bus refresh rate (1kS/sec max.)
Interface RS-232C (For data selection settings only)
Functions (1) Settings of CAN-Bus defined data (Various parameter settings to capture required data from CAN-Bus)
(2) CAN-Bus signal input port settings
(3) Output channel settings (Settings to determine output channels for captured data), etc.
Power supply AC adapter (100 to 240V AC universal), 10 to 30V DC (Can be supplied from a cigarette lighter socket in an automobile.), Supplied from CAN-Bus signal input connector (10 to 30V DC)
Dimension and mass 180 mm (7.09 in) W × 50 mm (1.97 in) H × 100 mm (3.94 in) D, 940 g (33.2 oz)
Accessories AC Adapter 9418-15 × 1, RS-232C Cable× 1, CAN Cable 9713-01× 1, CD-R (including 8910 Setting Software), Instruction Manual × 1


Ask about this product