Fluke 2AC is the latest addition to the VoltAlert AC non-contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The Fluke 2AC tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized Fluke 2AC tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present.
The Fluke 2AC is pocket-sized and easy to use. Just touch the tip to a terminal strip, outlet, or cord. When the tip glows red you know there’s voltage in the line. Electricians, maintenance, service and safety personnel, as well as homeowners, can quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home.
|Safety compliance||Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01, Pollution Degree 2|
|EMC compliance||Meets IEC 61326-1:2006|
|Operating||90V ac to 1000V ac|
|Temperature||Operating: -10°C to 50°C (14°F to 122°F)
Storage: -10°C to 50°C (14°F to 122°F)
|Humidity||0% to 95% (0°C to 30°C, 32°F to 86°F)
0% to 75% (30°C to 40°C, 86°F to 104°F)
0% to 45% (40°C to 55°C, 86°F to 131°F)
|Altitude||2000m (CAT IV 1000 V)|
|Cleaning||Clean with damp cloth|
|Battery life||Typical battery life of greater than one year|