Products

AC/DC power supplies, Electronic Load

Stemming from the design and manufacture demands of electronic industries, GW Instek offers diverse power supply product lines to meet user’s demand for a variety of applications. Based on different needs, the product lines can be divided into several categories including DC Power Supply, AC Power Source and DC Electronic Load. For DC Power Supply, the products can be briefly categorized by the following types, Linear, Switching, Programmable or Non-programmable, Single or Multiple Outputs, High Precision or Affordable Price, Dual Range and Wide Combinations of Voltage and Current, which can be selected to meet the application requirements.

The new APS-Series AC/DC Power Source is not only a precision AC/DC power source, but also as a powerful analyzer, containing abundant features for the testing and characteristic analysis of power supplies, electronic devices, components and modules. In addition to AC/ DC Power Source the APS-Series is fully programmable to simulate different power outputs. Sequence can be created by using arbitrary waveforms as well as voltage or frequency sweeps.

GW Instek offers more than 100 power supply products are suitable for the requirements of Electronic Assembly Testing, Education, Component Testing, Wireless Product Testing, Burn-in, Battery-Power Product Testing Automotive, Aerospace industries and so on.

  • Filter
  Name SKU Description Category
GW INSTEK PCS-1000 Features - 6 1/2 Digit measurement resolution- Dual measurement for Voltage and Current- AC&DC Current measurement range:30mA/300mA/3A/30A/300A(Max)AC Voltage measurement range:200mV/2V/20V/200V/600V(Max)DC Voltage measurement range:200mV/2V/20V/200V/1000V(Max)- Auto zero circuit- Standard Interfaces: USB, GPIB Precision Current Shunt Meter
GW INSTEK APS-1102A Features : - 5.7" Large LCD Display- Output Capacity: 1kVA(for AC 200V Input)- Output Modes: AC and AC+DC Combined with any of four signal sources- Signal Source: Internal(INT),External(EXT),Internal+Externl(ADD)and Sychronization(SYNC)- Arbitrary Waveform Power Output- Power Amplifier of External Signal- Measurement Functions: Voltage, Current, Power ,Frequency, PowerFactor,CF,and Harmonic Current- Capacitor Input Load Supported- Sequence Function Allows Programming of Output Patterns-... Programmable AC / DC Power Source
GW INSTEK PEL-3000 Series Features : -Operating voltage (DC):1.5V~150V-Operating Mode : C.C / C.V / C.R / C.P / CC+CV / CR+CV / CP+CV -Parallel Connection of Inputs for Higher Capacity (Max : 9,450W)-Support of High Slew Rate:Max 16A/us-Run Program Function(GO/NO GO Test)-Sequence Function for High Efficient Load Simulations-Commands are compatible with Kikusui PLZ-4W model.-Dynamic(Switching) Function:0.0166Hz ~20kHz-Soft Start Function:Off / On(1~200ms, Res:1ms)-Adjustable OCP / OVP / OPP / UVP Setting... Programmable DC Electronic Load
GW INSTEK PPS-3635 Features: Easy Operation with UP/DOWN Key High Resolution: 10mV, 1mA Over Voltage Protection, Over Current Protection by Hardware 100 Sets of Memory Self Test and Software Calibration Meets UL CSA IEC Safety Regulation Auto Step Running With Time Setting FRONT/REAR Output and Sense Switch Selectable IEEE-488.2 and SCPI Compatible Command set Labview Driver Software High Stability, Low Drift 4 Digit Display Programmable Linear D.C. Power Supply
GW INSTEK GPS-x303 Series Features: 4 Independent Isolated Output Four "3 Digits" LED Displays 0.01% Load and Line Regulation Low Ripple and Noise Tracking Operation and Auto Series/Parallel Operation Output ON/OFF Switch Output Voltage and Current Setting When Output Disable Fan Speed Control Circuit to Minimize Fan Noise Over Load and Reverse Polarity Protection Optional European Jack Type Terminal Linear DC Power Supplies
GW INSTEK PSW Series Features: Features * Voltage Rating: 30V/80V/160V/250V/800V, Output Power Rating: 360W ~ 1080W* Constant Power Output for Multiple Range (V&I) Operation* CV/CC Priority; Particularly Suitable for the Battery and LED Industry* Adjustable Slew Rate* Series Operation: Up to 2 units (30V, 80V, 160V models only)* Parallel Operation: Up to 3 units* High Efficiency and High Power Density* 1/2, 1/3, 1/6 Rack Mount Size Design (EIA/JIS Standard) for 360W/720W/1080W* Standard Interface:... Programmable Switching DC Power Supplies
GW INSTEK SPS Series Features: Dual Measurement Display0.01 % High RegulationConstant Voltage and Constant Current OperationHigh EfficiencyHigh Power DensityOver Voltage ProtectionRemote Output ON/OFF Control Switching DC Power Supplies
GW INSTEK APS-9000 Series Features: True RMS Meter Wide Output Voltage / Frequency Variable Range Save/Recall 4 Sets of Voltage/Frequency Memory Over Current Protection and Over Temperature Protection Stable and Low-Distortion Output Waveforms Software Calibration to Ensure Accuracy Panel-Lock Function to Prevent Operation ErrorFrequency,Volt,Amp,Watt and Power Factor Display AC Power Source
GW INSTEK PEL-300 Features: Operating Current 6mA ~ 60A Operating Power 1 ~ 300W Operating Voltage DC 3 ~ 60V Easy Operation with UP/DOWN Key High Resolution : 20mV, 0.2mA, 0.33mΩ Over Voltage, Over Current, Over Power Protection 100 Sets Memory C.C, C.V & C.R Operation Mode Transient Generator Frequency Range : 1Hz ~ 1kHz Duty Range : 10% ~ 90% Self-Test and Software Calibration Meets UL, CSA, IEC Safety Regulations DC Electronic Loads
GW INSTEK AC power supply APS-1102 Features : AC power supply(Power Supplies5.7”large LCD displayVarious output modes and measurement functionsAC-superimposed DC outputCapacitor input load supportedSequence functionLimiter function30 Sets of SAVE / RECALL memoriesUSB(USBTMC)standard for remote controlOutput On/Off FunctionAC power supply   Programmable AC / DC Power Source
GW INSTEK PEL-2000 Series Features: -Sequence function to do high Efficient load simulations-Flexible configuration with mainframes and plug-in modules-Multiple independent load inputs up to 8 channels in a mainframe-Parallel connection of inputs for increased load capacity-Parallel connection of inputs for static and dynamic tests-Multiple channels run for dynamic tests under one clock control -Maximum rated power for low range high resolution CC tests-Von setting and Von on/off for start-up Von tests-Program mode to... Programmable DC Electronic Load
GW INSTEK PPE-3323 Features: Easy operation with UP/DOWN key High resolution: 10mV, 1mA Over voltage protection, over current protection by software 50 Sets memory Self test and software calibration Meets UL, CSA, IEC safety regulation Auto step running with timer setting Triple output Auto tracking RS-232 communication High stability,low drift 4 digit display Programmable Linear D.C. Power Supply
GW INSTEK GPR-U Series Features: 0.01% High Regulation Constant Voltage and Constant Current Operation Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digits 0.5" LED Display Application for Material and Products Aging Built-In Overvoltage and Overcurrent Tripped Crowbar Ten-Turn Potentiometer Linear DC Power Supplies
GW INSTEK PSH Series Features: Wide input voltage range and high power factor (P.F) high efficiency and high power density Constant voltage and constant current operation Over voltage over current and over temperature protection Low ripple and noise Output on/off control Self-test and software calibration Labview driver Standard interface : RS-232C Optional interface : GPIB ( IEEE-488.2 ) Programmable Switching DC Power Supplies
GW INSTEK SPD-3606 Features: Three independent, isolated output CH3 adjustable output : 0.1~5V/3A High efficiency power conversion (up to 25% more than traditional power supply) Remote output on/off control OVP to protect the DUT OTP to protect SPD-3606 to decreas the repair rate Compact size, light weight Low Fan acoustic noise with fan speed control circuit Voltage/current protection knob (option) Switching DC Power Supplies
GW INSTEK PPH-1503 Features: -Dual Range Output (0~15V/0~3A) or (0~9V/0~5A)-3.5 Inch TFT LCD Display-Constant Voltage and Constant Current Operation-Built-in DVM Measurement Function-High Measurement REsolution (1mV/0.1mA for 5A Range);(1mV/0.1uA for 5mA Range)-EXternal Relay Control Output On/Off-Sink Current Capability (Maximum:2A)-Digital Panel Control-Selectable Output and Input (DVM) Ports From Front or Rear Panel-Key Lock Function-5 Sets of Preset Memory Including Power Output ON/OFF States-High Speed... Programmable Linear D.C. Power Supply
GW INSTEK GPR-H Series Features: 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED DisplayInternal Select for Continuous or Dynamic Load (for GPR-3510HD/GPR-6060D/GPR-7550D) Linear DC Power Supplies
GW INSTEK PSU-Series Features: -Voltage Rating:6V/12.5V/20V/40V/60V-Output Power Rating: 1200W~1520W-C.V / C.C Priority ; Particularly Suitable for the Batterey & LED industry-Adjustable Slew Rate -Series and Parallel operation (2 Units in Series or 4 units in parallel)-High Efficiency and High Power Density-19 Inch Rack Mount Size Design-Stabdard Interface: LAN, RS-232 & RS-485, USB(Device / Host), Analog Control Interface-Optional Interface:GPIB, Analog Control Interface(Isolated Voltage Control), Analog... Programmable Switching DC Power Supplies
GW INSTEK PPT Series Features: Easy operation with UP/DOWN key High Resolution: 10mV, 1mA Over voltage protection, over current protection by hardware 50 Sets memory Self test and software calibration Meets UL CSA IEC Safety Regulation Auto Step Running With Timer Setting FRONT/REAR Output and Sense Switch Selectable Triple Output Auto Series and Parallel Operation Auto Tracking IEEE-488.2 and SCPI Compatible Command set Labview Driver Software Available High Stability, Low Drift 4 Digit Display Programmable Linear D.C. Power Supply
GW INSTEK GPR-M Series Features: 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display Linear DC Power Supplies