|
Fluke Ti100 160 x 120 Resolution, -20°C to 250°C (-4°F to 482°F) Thermal Imager for General Use
|
|
Full Infrared
Wide field of view; with no optional lens
Image rotation in SmartView for analysis and reporting purposes
Detector type – Vanadium oxide (Vox)
Provides a clearer image
Withstands higher heat and radiation than amorphous silicone
Built-in Laser Pointer
Smart battery system
Replaceable, rechargeable lithium-ion batteries
One-touch power level indicator on the battery
Easy to remove and replace, with or without gloves
Light weight and well balanced
1.6... |
Thermal Imagers
|
|
|
Fluke 51-2, 52-2, 53-2, & 54-2 Digital Thermometers
|
|
Electronic Offset function allows compensation of thermocouple errors to maximize overall accuracy
Measures J, K, T, and E-types of thermocouples
Readout in °C, °F, or Kelvin (K)
Splash and dust resistant case protected by impact absorbing holster
User-friendly front panel is easy to set up and operate
Sleep mode increases battery life; typical 1000-hour battery life
Battery door allows easy battery replacement without breaking the calibration seal
Optional ToolPak accessory allows... |
Thermometers
|
|
|
Fluke 805 Vibration Meter
|
|
Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
Consistent data quality at both low and high frequency ranges
Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
Exportable data via USB
Trending in Microsoft Excel using built-in templates
Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
Crest... |
Vibration Testers
|
|
|
Fluke VT02 Visual Infrared (IR) Thermometer 10°C to +250°C (14°F to 482°F) Temp. Range, 2°C Accuracy
|
|
-10°C to +250°C (14°F to 482°F) Temperature Measurement Range
2°C or 2% (at 25 °C nominal, whichever is greater) Accuracy
Detect issues instantaneously with digital and thermal blended images
Pinpoint hot and cold spots with temperature markers
Perform inspections up to 30 times faster than traditional infrared thermometers
Document and communicate problems efficiently with SmartView reporting software
|
Visual Thermometer
|
|
|
Fluke 281, 282, & 284 Arbitrary Waveform Generators
|
|
Choice of 1, 2 and 4 independent or linked channels
40 MS/s max. sampling speed
16 MHz function generator
10 MHz pulse generator
Pulse train pattern generator
Arbitrary waveforms of up to 65 k points
Powerful modulation capabilities
Built-in trigger generators
Waveform Manager Plus for Windows® software
Multiple standard waveforms recalled from internal memory
RS-232 and GPIB interfaces
|
Waveform Generators
|
|
|
Fluke CNX I3000 Wireless iFlex AC Current Module and accessories
|
|
LCD w/backlight 3½ digits
Crest factor (50 Hz/60 Hz) 3.0 at 1100 A, 2.5 at 1400 A, 1.42 at 2500 A, add 2 % for C.F. > 2
Log rate/interval 1 sec minimum/adjustable by PC or front panel
EMC EN 61326-1:2006
|
Wireless Multimeters
|
|
|
Fluke 789 Process Meter
|
|
24 V Loop power supply
HART mode setting with loop power (adds 250 ohm resistor)
100 % larger dual display
1,200 ohm drive capability on mA source
Enhanced backlight with two brightness settings
0-100 % mA Span Check buttons to toggle between 4 and 20 mA
Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1 (available Feb. 2003)
Externally accessible fuses for easy replacement
DMM designed to meet 1000 volt IEC 1010 CAT III standards
Precision 1000 V, 440 mA... |
Calibrators/Injectors
|
|
|
FIL110A-Portable fuel and oil cleanliness analyser
|
|
Portable diesel fuel and oil contamination monitor.Fitted with laser particle counter. Results inISO4406, NAS and SAE formats.High viscosity pumpallowing oils up to 424cst. |
Oil Analyser
|
|
|
Fluke Networks TS22 and TS22A Telephone Test Set
|
|
Tone (DTMF) and pulse operation
Last number redial
DTMF signal levels compensated for loop length
DropSafe™ unit up to 20 feet
Audible electronic ringer
Locking mute switch
3-year redial storage time
Over voltage and over current protection
PBX pause button
Field replaceable belt clip
Continuous polarity LED indications
For use with computerized voice response systems
Stores nine 18-digit numbers in repertory dialer (speed dialing)
RainSafe™ ruggedness for use in... |
Telephone Test Sets / Butt Sets
|
|
|
FLIR E6 Thermal Imager
|
|
Entry-Level Thermal Camera
feature rich and extremely affordable thermal imaging camera with FLIR's patented MSX-technology
Designed for entry-level users, and measuring temperatures up to +250°C, the E6 produces instant, ‘point-and-shoot’ JPEG thermal imagery with all required temperature data included.
FLIR Part No: 63902-0202
|
E-Series Thermal Cameras
|
|
|
Fluke Networks MS2-100 MicroScanner2 Cable Verifier with MS2-KIT and MS2-TTK Kits
|
|
Revolutionary Interface – Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
Multimedia Support – Tests all common media types including RJ11, RJ45, Coax, with no need for adapters
IntelliTone Toning – Locates virtually any cable or wire pair with IntelliTone digital and analog toning
VDV Service Detection – Verifies today's media services, including 10/100/1000 Ethernet, POTS, and PoE
Rugged Housing – Integrated rubber holster enhances grip... |
Copper Cable Test Solutions
|
|
|
Fluke BP880 BNC to Female Double Stacking Banana Plug
|
|
Allows for hands-free testing in controlled voltage environments 500 VRMS maximum
Banana plug is nickel-plated, beryllium copper for low contact resistance
The BNC shell is plated for tarnish resistance
Operating temperature +50 °C (+122 °F) maximum
|
Automotive Accessories
|
|
|
Fluke Networks OptiView Series III Integrated Network Analyzer
|
|
802.1X authentication
Gigabit line rate capture, traffic
Generation and Internetwork Throughput
Free string match filtering and triggers with the ability to control capture and provide detailed event analysis
VLAN trunk analysis
Infrastructure device analysis using SNMPv3
Application Troubleshooting
Expert option validates network services and provides detailed application flow analysis
Management port for out of band remote control
|
Network Analyzers and Testers
|
|
|
Fluke 175/Fluke 177/Fluke 179 TRMS Digital Multimeter
|
|
Lifetime Warranty
6000 Count Display Provides Better Resolution
0.09% Basic DC Accuracy (Fluke 177 & Fluke 179)
True-rms AC Voltage and Current Measurement for Accurate Readings on all Waveforms
Min/Max/Average Records Irregular Activity
Auto and Manual Hold
Frequency, Capacitance and Resistance Capabilities
Fluke 177 and Fluke 179 Have a Backlight to Illuminate the Screen in Dark Workspaces
The Fluke 179 Measures Temperature in °C and °F (Thermocouple Included)
IEC 1010 CAT IV... |
Fluke
|
|
|
Fluke Networks CFP-100-S CertiFiber Pro Singlemode OLTS Kit (LC Style)
|
|
Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection
Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors.
Fastest time to certify – two fibers at two wavelengths in three seconds.
Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords
Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... |
Fiber Certification and Testing
|
|
|
FLIR i3 Thermal Camera
|
|
60 x 60px Thermal Imager
FLIR I-SERIES - EXPANDED THERMAL IMAGING PERFORMANCE. RUGGEDNESS YOU CAN TRUST
The i3 camera is extremely easy to understand and operate, designed for entry-level users.
FLIR Part No: 60101-0101
|
FLIR i-Series Thermal Imagers
|
|
|
Fluke BP189 High Capacity Battery Pack for Fluke 180 Series DMM
|
|
Attach this battery pack to your Fluke 189 to use 4 ‘C’ cell batteries instead of the ‘AA’ cell batteries
CAT III 1000 V, CAT IV 600 V
One Year Warranty
Batteries and meter sold separately
|
Batteries, Charges and Adapters
|
|
|
Fluke Networks Inline Aggregating Filter Taps
|
|
Increase the visibility and performance of network monitoring and analysis devices
Share information between multiple departments
Reduce the number of monitoring and analysis devices needed to effectively manage your network
Gain access to full-duplex and meshed network traffic for multiple analysis devices
Improve the performance of network analysis solutions using hardware-based filtering within the tap
Eliminate the possibility of dropped packets by filtering for only relevant... |
Taps
|
|
|
Fluke 365 True-rms AC Clamp Meter with Detachable 18mm Jaw
|
|
200A ac and dc current measurement with detach-able jaw
600V ac and dc voltage measurement
True-rms ac voltage and current for accurate measurements on non-linear signals
6000Ω resistance measurement with continuity detection
Detachable jaw makes accessing wires and viewing the display easier
Built in flashlight/torch allows for easy illumination and identification of wires
CAT III 600V safety rating
Compact design fits in your hand and can be used while wearing personal protective... |
AC Leakage Clamp Meter
|
|
|
Fluke 971 Temperature Humidity Meter
|
|
Backlit dual display of humidity and temperature
Measures dew point and wet bulb temperatures
99 record storage capacity
Ergonomic design with belt clip and protective holster
Quick-response capacitance sensor with twist-open protective cover
Compact and lightweight (188 g/6.6 oz)
Temperature range from -20 °C to 60 °C (-4°F to 140 °F)
Relative humidity from 5 % to 95 %
Min/Max/Avg Data hold
Low battery indicator
|
Air Quality Testers
|
|