• Filter
Category: May 2013
Price: 1390,00 $
Created on: 15 May 2013

Part clamp meter, part clamp marvel. With the Fluke 376 Clamp Meter with iFlex, you’ll be ready for anything.    

Category: May 2013
Price: 590,00 $
Created on: 15 May 2013

Compact true-rms meter All you need for general electrical and electronic testing Engineered by Fluke, with a three-year warranty      

Category: May 2013
Price: 450,00 $
Created on: 15 May 2013

Takes the heat. And the dust, water and 3-meter drop. The Fluke 62 MAX and 62 MAX+ are the only mini IR thermometers you can handle without care.  

Category: Fluke
Created on: 24 May 2013

Resistance, continuity, frequency, capacitance, and diode test Measures 20 A (30 seconds momentary; 10 A continuous) Large white LED backlight to work in poorly lit areas Compact ergonomic design for one-handed operation Compatible with optional magnetic hanger (ToolPak™) True-rms for accurate measurements on non-linear loads Min/Max/Average with elapsed time to record signal fluctuations CAT III 600 V safety rated

Created on: 12 February 2014

Current Range: 1 to 600 A DC or AC Peak Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A) Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A Frequency Range: 40 Hz to 400 Hz Working Voltage: 600 V AC rms Maximum Conductor Diameter: 34 mm (1.34 inch) Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V

Created on: 16 February 2014

Qualifies - Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet Troubleshoots - shows why existing cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters) Discovers - detects what's at the end of any cable and displays device configuration (speed/duplex/pairing) Identifies unused switch ports that can be reallocated Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap Tests all copper cabling media: twisted-pair, coax, and audio cabling

Created on: 16 February 2014

NetProve diagnostics – isolate device and application connectivity issues in seconds Inline Gigabit vision - quickly troubleshoot network problems with powerful inline vision into 10/100/Gig traffic between switches, PCs, IP phones and other devices NetSecure monitoring and authentication - identify spyware, malware, and viruses with port monitoring; troubleshoot authentication issues with 802.1x log VoIP troubleshooting - connect inline for visibility into VoIP calls to quickly diagnose IP phone boot-up and call control problems and to measure key call quality metrics PoE Measurements - verify readiness of PoE systems and troubleshoot PoE device problems Spot available network resources – See MAC and IP addresses, subnet and services offered by active servers, routers and printers IntelliTone digital signaling - quickly and safely locate cables on active network

Created on: 16 February 2014

Superior high-impedance monitoring Data indication/warning Low & high voltage indication/warning Low current (mA) indication/warning Passive monitor 2-Way hands-free speakerphone Low battery warning Mute indication Polarity indication Tone & pulse dialing (Optional) 1-Way amplified speakerphone mode Amplified speaker Last number redial Over voltage protection Over current protection Mute PBX pause button Audible ringer Speed dialing Volume control levels Line and battery powered Hearing aid compatible Waterproof case design for sever weather conditions, exceeds American Military Spec MIL-STD-810E DropSafe™ 20ft onto concrete Mountable, top or bottom, extra large steel locking belt clip Line cord strain relief TS44 includes Patented DSL/POTS filtering technologies TS44 includes Data Lockout TS44 includes Lockout Override