|
DKK-TOA OBM-102A
|
|
Panel type DO analyzer in a compact DIN 96 size
One-touch calibration and various self-diagnostic functions
2-point contacts signal, 4 - 20mA output (RS-232 optional)
Power supply: 90 - 264VAC, 50/60Hz
Meas. range
Minimum : 0 - 1 mg/L Maximum: 0 - 50 mg/L
|
Panel Type DO Analyzer
|
|
|
DKK-TOA NPW-160
|
|
Automated Total Nitrogen/Phosphorus/COD Analyzer NPW-160
Measuring based on official measuring method
Multiple-wavelength detector enables measurement of total nitrogen, total phosphorus and COD simultaneously
Space-saving design attained by eliminating back piping
Drip-proof construction
Meas. range
Total nitrogen: 0 - 2 mg/L to 50 mg/L Total phosphorus: 0 - 0.5mg/L to 20 mg/L COD (UV method): 0 - 2 Abs
|
Automatic Total Nitrogen/Phosphorus/COD Analyzer
|
|
|
DKK-TOA MDM-135A (2-wire)
|
|
Electromagnetic Conductivity Transmitter MDM-135A (2-wire)
Electromagnetic conductivity analyzer for field installation in a compact and rigid aluminum enclosure
Made for accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali)
Alterable output range
Meas. range
Minimum : 0 - 2 mS/cm Maximum : 0 - 2000 mS/cm
|
Transmitter for Electromagnetic Conductivity Analyzer
|
|
|
DKK-TOA HM-30P / 31P
|
|
Standard model for pH measurement (HM-30P)
Sophisticated type, capable of pH and ORP measurements (HM-31P)
Power-saving design; rechargeable battery adaptable
Waterproof design (IP67: 1m depth, up to 30mins)
Data storage up to 1000 points
Meas. range
pH 0 - 14 (HM-30P/31P) 0 - 100.0 degrees C (HM-30P/31P) 0 - ±2000 mV (HM-31P) (ORP electrodes sold separately) |
Handheld pH/ORP Meter
|
|
|
DKK-TOA AQM-100A
|
|
Resistivity Analyzer for Ultra-Pure Water AQM-100A
Compact DIN 96 size
Best suited for water quality control in ultra-pure water production lines
Two detectors connectable
Meas. range
0.00 - 20.00 MΩ・cm
|
Panel Type Resistivity Analyzer for Ultra-Pure Water
|
|
|
DKK-TOA FPM-377
|
|
PM2.5 Monitor FPM-377
Environment Ministry (JAPAN) Approval
Beta ray attenuation method (mass concentration)
Heater type dehumidifier
VSC cyclone (USEPA approval)
Outdoor type and indoor type available
Meas. range
0 - 500, 0 - 1000, 0 - 5000 μg/m3
|
Particulate Monitor
|
|
|
DKK-TOA BSC
|
|
A complete sampling system composed with cooler, pressure reducer, valves, flowmeter and thermostat chambers
Enables sampling for analysis from the boiler
Consistent manufacturing from analyzer to sampler
Sample condition
Maximum temperature: 600 degrees C Maximum pressure: 30 MPa Maximum flow rate: 3 L/min
|
Boiler Sampling System
|
|
|
DKK-TOA XAT-200 series
|
|
Process analyzer for automating analytical techniques such as atomic absorption and etc.
Suitable for automating chemical analysis processes such as distillation, heat treatment, etc.
Example applications:
*Total chromium *Total cyanide by atomic absorption/distillation *Phenols by atomic absorption/distillation *Total mercury by oxidation-reduction atomic absorption |
Automatic Process Analyzer
|
|
|
DWY001 to DWY008 F-Shape Stainless Steel Pitot tubes from USA
|
|
The SERIES F Shape Stainless Steel Pitot Tube is constructed from corrosion resistant stainless steel with permanently etched insertion depth graduations for a lifetime of service. The static pressure port is parallel to the sensing tube to allow quick, easy alignment of the tube with air flow. A universal model fits the user supplied 3/4" schedule 40 pipe in any length.
Model
Description
DWY001-160-12
Stainless steel Pitot tube, 5/16" 8mm dia., 12-5/8" 35cm insertion... |
F-Shape Pitot Tubes (Prandtl)
|
|
|
DKK-TOA HDM-135A(2-wire)/HDM-136A(4-wire)
|
|
Industrial pH Transmitter HDM-135A(2-wire)/HDM-136A(4-wire)
Easy-to-use pH analyzer for field installation in a compact and rigid aluminum enclosure
Easier calibration done with standard solution
Auto determination of electrode deterioration
Alterable output range
Automated self-diagnosis of fault (burn-out output)
Meas. range
-1 - 14
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA HM-30R
|
|
Large color graphic LCD display
0.01/0.001 pH display switchable
High-performance with the Strong&Float (internal solution concentration checker) pH electrode
USB (Host) and LAN equipped
Multiple sample measuring capability (turntable connection)
Meas. range
pH 0.000 - 14.000 0.0 - ±2000.0mV (ORP electrodes sold separately) 0 - 100.0℃ |
pH meters
|
|
|
DKK-TOA MWB4-70
|
|
B4 size compact analyzer excellent in reliability, durability and maintainability
Enables continuously measurement of turbidity, color, residual chlorine, pH, conductivity, temperature and pressure without reagents
Equipped with interactive easy-to-use color touch panel
|
Automatic Water Quality Analyzer for City Water
|
|
|
DKK-TOA BPM-2000
|
|
Designed for oil refinery
Automatic fractional distillate analyzer of batch distillation type enables distillation test of petroleum products such as kerosene, diesel oil, gasoline and etc.
Adopts high resolution liquid level detecting sensor
Newly-developed FA computer embedded with large-sized, color touch panel
Explosion-proof TIIS fd2G4 certified
Meas. range
Standard:Light gas oil (0 - 400 degrees C), Kerosene (0 - 300 degrees C), Gasoline (0 - 200degrees C)
|
Boiling Point Analyzer
|
|
|
DKK-TOA WDM-135A (2-wire) / WDM-136A (4-wire)
|
|
Industrial Conductivity Transmitter WDM-135A (2-wire) / WDM-136A (4-wire)
Easy-to-use conductivity analyzer for field installation in a compact and rigid aluminum enclosure
Wide application range from ultra-pure water to wastewater
Alterable output range
Meas. range
Minimum: 0 - 0.2 μS/cm Maximum: 0 - 20 mS/cm |
Transmitter for Industrial Conductivity Analyzer
|
|
|
DKK-TOA HBM-100A / HBM-102A
|
|
Compact DIN 96 size design
Auto-detection of electrode deterioration
Automated self-diagnosis of fault (burn-out output)
Alterable alarm contact signal (4-point)
2-channel output (RS-232 optional)
Meas. range:
HBM-100A: pH; -1 - 15 HBM-102A: ORP; -2000 - +2000 mV |
Panel Mount pH/ORP Analyaer
|
|
|
DKK-TOA FPA
|
|
Designed for oil refinery
Batch continuous analysis of flash point of petroleum products such as light gas oil, kerosene and gasoline
Best suited for management of plant and product control
Explosion-proof TIIS d2G4 certified
Meas. range
0 - 100 degrees C
|
Flash Point Analyzer
|
|
|
DKK-TOA WM-32EP
|
|
2-channel type, simultaneous measurement and display of pH/conductivity
Power-saving design; rechargeable battery adaptable
Waterproof design (IP67: 1m depth, up to 30mins)
Data storage up to 1000 points
PC and external printer connectable
Measurement items
pH, ORP, conductivity, resistivity, salinity, temperature (ORP electrodes sold separately) |
Handheld Electrical Conductivity/pH Meter
|
|
|
DKK-TOA MBM-100A
|
|
Panel Type Electromagnetic Conductivity Analyzer MBM-100A
Compact DIN 96 size
Accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali)
2-point contact signal, 4 - 20mA output (RS-232 optional)
Meas. range
Minimum : 0 - 2 mS/cm Maximum: 0 - 2000 mS/cm
|
Panel Type Electromagnetic Conductivity/Concentration Analyzer
|
|
|
DKK-TOA GLN-314E
|
|
Nitrogen Oxides Analyzer GLN-314E
US EPA Approval
Chemical luminescence method
Alternating measurement of nitric monoxide (NO) and nitrogen oxides (NOx) ensures stable and continuous measurement of minute amounts of nitrogen oxides in the air
Easy-to-use touch panel
Meas. range
0 - 0.1, 0 - 0.2, 0 - 0.5, 0 - 1.0, 0 - 2.0 ppm
|
Nitrogen Oxides Analyzer
|
|
|
DKK-TOA CM-30R
|
|
JP16 (The Japanese Pharmacopoeia 16th edition) conformity and stable electric conductivity measurement
Built-in pure water temperature compensation
USB (Host) and LAN equipped as standard specification
Compliant with USP<645> requirements
Meas. range
0 - 200.0 S/m 0 - 20.00 MΩ・m Chloride 0 - 4.00% Concentration 0 - 200% 0 - 100.0 degrees C |
Conductivity Meter
|
|