|
GW INSTEK PPH-1503
|
|
Features:
-Dual Range Output (0~15V/0~3A) or (0~9V/0~5A)-3.5 Inch TFT LCD Display-Constant Voltage and Constant Current Operation-Built-in DVM Measurement Function-High Measurement REsolution (1mV/0.1mA for 5A Range);(1mV/0.1uA for 5mA Range)-EXternal Relay Control Output On/Off-Sink Current Capability (Maximum:2A)-Digital Panel Control-Selectable Output and Input (DVM) Ports From Front or Rear Panel-Key Lock Function-5 Sets of Preset Memory Including Power Output ON/OFF States-High Speed... |
Programmable Linear D.C. Power Supply
|
|
|
GW INSTEK PPT Series
|
|
Features:
Easy operation with UP/DOWN key High Resolution: 10mV, 1mA Over voltage protection, over current protection by hardware 50 Sets memory Self test and software calibration Meets UL CSA IEC Safety Regulation Auto Step Running With Timer Setting FRONT/REAR Output and Sense Switch Selectable Triple Output Auto Series and Parallel Operation Auto Tracking IEEE-488.2 and SCPI Compatible Command set Labview Driver Software Available High Stability, Low Drift 4 Digit Display |
Programmable Linear D.C. Power Supply
|
|
|
GW INSTEK PST Series
|
|
Features:Digitized programmable interfacehigh resolution 10mV, 1mA 192 x 128 LCD display, simultaneously Over-voltage, over-current, over temperature protection Intelligent fan control (changes by output power) 100 Sets memory Auto step running with timer Provided auto series and parallel function Labview driver Standard interface: RS-232C Optional: GPIB (IEEE-488.2) Optional European jack type terminal |
Programmable Linear D.C. Power Supply
|
|
|
GW INSTEK PSS Series
|
|
Features:
Digitized Programmable Interface High Resolution 10mV, 1mA High Stability, Low Drift Over-Voltage, Over-Current, Over Temperature Protection Intelligent Fan Control (Changes by Output Power) Built-in Buzzer Alarm Labview Driver Standard Interface: RS-232C Optional Interface: GPIB (IEEE-488.2) Optional European Jack Type Terminal |
Programmable Linear D.C. Power Supply
|
|
|
GW INSTEK PSM Series
|
|
Features:
Single Output Dual Range Max. 200WHigh resolution: 1mV/1mA0.01% load/line regulation, 350uVrms rippleAuto step runing with timer setting and 100 Sets memorySafety design: OVP,OCP & OTP;Output ON/OFF controlSelf-test and software calibrationHighly visible vacuum-fluorescent displayFront and rear output terminalStandard interface : RS-232C, GPIBOption : European Jack Type Terminal
|
Programmable Linear D.C. Power Supply
|
|
|
GW INSTEK GPD-Series
|
|
Features:
2/3/4 Independent Isolated Output4 LED Display Sets: 3 digits after decimal point Minimum Resolution : 1mV/1mA(GPD-2303D/GPD-3303S/GPD-4303S)100mV/10mA(GPD-3303D)Digital panel control(rotary encoder Switch, rubber key with indicator) User-friendly operation, coarse/fine volume control 4 Sets Save/Recall Key-Lock Output on/off Tracking Series and Parallel mode Smart cooling fan achieving low noise USB Standard InterfacePC Software & USB Driver Labview driver |
Programmable Linear D.C. Power Supply
|
|
|
GW INSTEK PEL-3000 Series
|
|
Features :
-Operating voltage (DC):1.5V~150V-Operating Mode : C.C / C.V / C.R / C.P / CC+CV / CR+CV / CP+CV -Parallel Connection of Inputs for Higher Capacity (Max : 9,450W)-Support of High Slew Rate:Max 16A/us-Run Program Function(GO/NO GO Test)-Sequence Function for High Efficient Load Simulations-Commands are compatible with Kikusui PLZ-4W model.-Dynamic(Switching) Function:0.0166Hz ~20kHz-Soft Start Function:Off / On(1~200ms, Res:1ms)-Adjustable OCP / OVP / OPP / UVP Setting... |
Programmable DC Electronic Load
|
|
|
GW INSTEK PEL-2000 Series
|
|
Features:
-Sequence function to do high Efficient load simulations-Flexible configuration with mainframes and plug-in modules-Multiple independent load inputs up to 8 channels in a mainframe-Parallel connection of inputs for increased load capacity-Parallel connection of inputs for static and dynamic tests-Multiple channels run for dynamic tests under one clock control -Maximum rated power for low range high resolution CC tests-Von setting and Von on/off for start-up Von tests-Program mode to... |
Programmable DC Electronic Load
|
|
|
Glycol Bottle with Thermocouple Probe Assembly
|
|
30ml, 60ml and 250ml Glycol Bottles with Thermocouple Probe Assembly |
Probes
|
|
|
GW INSTEK PCS-1000
|
|
Features
- 6 1/2 Digit measurement resolution- Dual measurement for Voltage and Current- AC&DC Current measurement range:30mA/300mA/3A/30A/300A(Max)AC Voltage measurement range:200mV/2V/20V/200V/600V(Max)DC Voltage measurement range:200mV/2V/20V/200V/1000V(Max)- Auto zero circuit- Standard Interfaces: USB, GPIB |
Precision Current Shunt Meter
|
|
|
GAS DNA PIR550 Non-Contact Portable Infrared thermometer
|
|
The thermometer is a non-contact infrared thermometer. It can measure from -60 to 550 ℃ (-76~1022 ºF) in the distance of 75:1 DS (Distance to Spot) ratio There are many mathematical modes for the Infrared function |
Portable Infrared thermometer
|
|
|
GAS DNA PIR1500 Non-Contact Portable Infrared thermometer
|
|
The non-contact infrared thermometer is the ultimate tool for temperature measurements. It can measure from -35 to 1500 ℃ (-31~2732 ºF) in the distance of 75:1 DS (Distance to Spot) ratio. Furthermore, the memory mode can record and display the specific measurement with emissivity. There are many mathematical modes for the Infrared function. |
Portable Infrared thermometer
|
|
|
GAS DNA PIR2400 Non-Contact Portable Infrared thermometer
|
|
The non-contact infrared thermometer is the ultimate tool for temperature measurements. It can measure from 200 to 2400 ℃ (392 to 4352 ºF) in the distance of 100:1 DS (Distance to Spot) ratio. Furthermore, the memory mode can record and display the specific measurement with emissivity. There are many mathematical modes for the Infrared function.
[ Specification ]
Item
Non-contact Infrared Scan
function Thermocouple Probe Scan function (K type; a bead wire... |
Portable Infrared thermometer
|
|
|
GON103E-PP201V2 OYSTER PORTABLE PH METER WITH 1M CABLE PH PROBE,CASE
|
|
Microprocessor based with splash proof housing.
Large LCD built into adjustable "flip-up" cover. Simultaneous display pH and Temperature.
Rugged design for handheld or bench top use, neckstrap for "hands-free" operation.
Automatic or manual temperature compensation. °C/°F switchable
Simple to calibrate by one keyboard for 5 points buffer, calibration value can be adjusted as needed.
Indicate percentage of slope (PTS) after calibration.
Low battery and consumption indicator.
Auto shut... |
pH Meters
|
|
|
GON103C-PP203V2 OYSTER PORTABLE PH METER WITH 1M CABLE PH/TEMP PROBE,CASE
|
|
Features:
Microprocessor based with splash proof housing.
Large LCD built into adjustable "flip-up" cover. Simultaneous display pH and Temperature.
Rugged design for handheld or bench top use, neckstrap for "hands-free" operation.
Automatic or manual temperature compensation. °C/°F switchable
Simple to calibrate by one keyboard for 5 points buffer, calibration value can be adjusted as needed.
Indicate percentage of slope (PTS) after calibration.
Low battery and consumption... |
pH Meters
|
|
|
GON103A-PH5011 HANDHELD PH BASIC PEN-TYPE METER 0.0~14.0 PH
|
|
Features:
Fast response combined with High Accuracy.
Lightweight and compact.
Splash-proof membrane keypad.
Electrode can be extended up to 80mm.
Pocket clip moulded on the rear of the case.
Specifications:
PH5011
PH5011A
COND5021
COND5022
TDS5031
TDS5032
ORP5041
EC5061
Type:
pH
Conductivity
TDS
ORP
EC
Range:
0-14.0
0-14.00
0-19990μS
0-1999μS
0-19990 ppm
0-1999 ppm
±1999 mV
0-20.0 EC
Accuracy:
±0.1+1 digit
±0.01+1... |
pH Meters
|
|
|
GON103B-7011 HANDHELD PH PEN-TYPE WATERPROOF HIGH ACCRACY METER WITH AUTO TEMP COMPENSATION,CASE
|
|
Feature
Microprocessor based for fast and accurate measurements.
Special viewing angle designed of waterproof housing IP 57 rated. It floats on water.
Large LCD display pH or ORP or Conductivity or TDS or Salinity or DO and Temperature Simultaneously.
Simple to calibrate by one keyboard and automatic temperature compensation(ATC), Manual Salinity(MSC) and Altitude(MAC) Compensation.
Multi-functions with Data-hold, Max/Min and shows PTS after calibration. Degree ℃/℉ are... |
pH Meters
|
|
|
GON120B-4805PHV2 PH INDICATOR(1/16 DIN)
|
|
Features:
Compact 1/16 DIN size fits into standard industry panel cutouts.
Microprocessor based for fast, reliable and accurate measurements.
Easy to calibrate by one keyboard. Degree ℃/℉ are switchable.
The large backlight LCD display pH or Conductivity and Temperature simultaneously.
Optional NEMA-4X gasketed lens cover fits over front bezel of controller-made of watertight corrosion resistant ABS plastic.
Specifications:
... |
pH Meters
|
|
|
GON103S-MP1034 HANDHELD SOIL/SEMI-SOLID PH METER FOR SOIL/SEMI-SOLID/FOOD,TEMP ,ATC FAST RESPONSE
|
|
Microprocessor based with splash proof housing.
Simultaneous display pH and Temperature.
Automatic or manual temperature compensation. °C/°F switchable
Simple to calibrate by one keyboard for 3 points buffer.
Calibration value can be adjusted as needed.
Indicate percentage of slope (PTS) after calibration.
Low battery and consumption indicator.
Auto shut off after 10 minutes of non use.
Rubber protective holster with magnetic.
|
pH Meters
|
|
|
GW INSTEK GOM-802
|
|
Features:
※ 30000 Counts Display ※ High Accuracy 0.05% ※ Hi/Lo Comparator and Limit Percent Setting ※ Measurement of REL, Actual and % Value ※ Continuous or Triggered Measurement Mode ※ Temperature Compensation and Measurement ※ Four-Terminal Measurement Technique ※ Auto-Recall Last Setting After Power OFF and ON Again ※ Alarm Setting for PASS/FAIL ※ Scan, Handler Interface(Standard) ※ Manual or Autoranging ※ RS-232C+GPIB (Option) |
Other Application Instruments
|
|