You have 0 items in your cart.
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
GW INSTEK RLB-001 | Features: * 1GHz Return Loss Bridge* N-Type Connector, Source/Load:Female, Couple:Male* Impedance : 50 ohms* 88 x 54 x 32(mm), 230g* For : GSP-Series | Special Applications |
|
|
|
GW INSTEK TL-06 | Features * SMD Type Measuring Clip* For : LCR-814 | Special Applications |
|
|
|
GAS DNA SD-50 Smoke sensor | SD-50, the smoke detector with built-in micro processor, receiving signal from sensor and comparing it with preset alarming value, if it exceeds, transmits the relay output to be connected to PLC/DDC. Usually, the other smoke detectors designed only for fire alarm cannot be used for industrial use because it cannot secure enough accuracy and stability. However, SD-50 accommodating highest accurate ionization sensor and industrial detector technology, secures best accuracy and stability at the... | Smoke sensor |
|
|
|
GAS DNA SD-110 2-Channel Smoke sensor | SD-110 is a microprocessor internal 2-channel smoke detector. SD-110 is an environment-adaptive smoke detector which displays the concentration on the back light LCD by receiving the serial signals from two sensors and by processing them in the digital mode, and performs the variety of local functions in digital process mode. Also, it can ensure the effective remote control by stably outputting the analog serial signals to external control unit such as PLC/DDC. As one of big advantages of... | Smoke sensor |
|
|
|
GAS DNA TS-60 Non contact Temperature + Smoke Detector | TS-60 is built-in Non contact Infrared thermometer and smoke sensor. The most of existing temperature and smoke sensors in markets can detect fire after the heat reach to temperature and smoke detector. However, TS-60 detects the fire by increased infrared amount and low concentrated smoke in early stage of the fire and enables to prevent the fire in advance. | Smoke sensor |
|
|
|
GNA2044-SD-1104V2 2-CHANNEL SMOKE DETECTOR WITH 4-20MA OUTPUT & DISPLAY | GNA2044 is a microprocessor internal 2-channel smoke detector. GNA2044 is an environment-adaptive smoke detector which displays the concentration on the back light LCD by receiving the serial signals from two sensors and by processing them in the digital mode, and performs the variety of local functions in digital process mode. Also, it can ensure the effective remote control by stably outputting the analog serial signals to external control unit such as PLC/DDC. As one of big advantages... | Smoke detectors |
|
|
|
GLO0038 SLUDGE JUDGE ULTRA, 15 FT - FROM USA (FINAL PRICE DEPENDING ON QUANTITY) | Sludge Samplers for taking accurate readings of settled solids. | Sludge Judge |
|
|
|
General Temperature Probe Selection (Type K) | KKInstruments hold the widest range of temperature sensors for your applications. Most of our sensors are made in Japan and Germany. | Sensors and Probes |
|
|
|
GW INSTEK GPT-9900 Series | Features: ※ 500VA AC Test Capacity※ 240x64 Ice Blue Dot matrix LCD※ Sweep Function for DUT characteristic analysis※ Insulation resistance measurement up to 50GΩ(GPT-9903/9904)※ Manual/Auto Mode※ Function Key for quick selecation※ High intensity flash for caution & Status indication※ Safety INTERLOCK function※ Zero Crossing Turn-on Operation※ Controllable Ramp-up Time※ True RMS Current Measurement ※ High resolution: 1uA for measuring current, 2V for setting... | Safety Testers |
|
|
|
GW INSTEK GPT-9800 Series | Features: ※ 200VA AC Test Capacity※ 240x64 Ice Blue Dot matrix LCD※ Manual/Auto Mode※ Function Key for quick selecting※ High intensity flash for Caution & Status indication※ Safety INTERLOCK function※ Zero Crossing Turn-on Operation※ Controllable Ramp-up Time※ True RMS Current Measurement ※ High resolution: 1uA for measuring current, 2V for setting voltage※ PWM amplifier to enhance the power efficiency and reliable testing ※ Max. 100 memory block for test condition... | Safety Testers |
|
|
|
GW INSTEK GPT-9600 Series | Features: ※ 100VA AC Test Capacity※ 240x48 Ice Blue Dot matrix LCD※ Auto W-I or I-W Mode※ ARC Detection※ True RMS Current Measurement※ Zero Crossing Turn-on Operation※ Safety INTERLOCK function※ PWM amplifier to enhance the power efficiency and reliable testing ※ Automatically Switching Input Source for Universal Input Voltage※ Interface : Remote terminal and Signal I/O | Safety Testers |
|
|
|
GW INSTEK GLC-9000 | Features: ※ Touch Panel with Color LCD Display※ 9 Different Measurement Network to Simulate the Resistance of Human Body※ 8 Different Types of Leakage current for Medical & General Electrical Equipment※ Various Leakage Current Measuring Mode： DC/AC/AC+DC/AC Peak ※ Upper & Lower Limitation for PASS/FAIL Judgment※ Meter Mode with SELV/CONV Function※ 50 Preset Test Conditions Conform to IEC 60990; 30 Sets Memories for Customer Defined※ Various Standard Interfaces：... | Safety Testers |
|
|
|
GW INSTEK GRS-6000A Series | Features * 50M/30MHz with 100MSa/s and 2 Channles * Equivalent Time Sampling of 500MSa/s max. * Acquire Mode : Peak Detect, Envelop, Persistence * Pre-Trigger Function 0 ~ 10 div * ROLL Mode to 100s/div * Waveform SAVE/RECALL 10 sets (REF0~REF9) * Max. Sweep Rate 10ns/div * Panel Setting SAVE/RECALL 10 sets (M0~M9) * RS-232C Interface | Real Time / Digital Storage Oscilloscope |
|
|
|
GLO0005-RG333 RAINGAUGE (AUTO-DRAIN) | RG333 RAINGAUGE (AUTO-DRAIN) Monitor Total Rainfall FEATURES: Easy to operate Automatically empties every 24 hours Minimal maintenance Raingauge Product Description GLO0005-RG333 Auto-Drain Raingauge is a durable weather instrument for monitoring total rainfall. The raingauges are appropriate for a variety of applications, including stormwater runoff monitoring, rainfall monitoring studies, and soil moisture studies. With minimal care, the raingauges will provide many... | Rain gauge |
|
|
|
GW INSTEK PSW Series | Features: Features * Voltage Rating: 30V/80V/160V/250V/800V, Output Power Rating: 360W ~ 1080W* Constant Power Output for Multiple Range (V&I) Operation* CV/CC Priority; Particularly Suitable for the Battery and LED Industry* Adjustable Slew Rate* Series Operation: Up to 2 units (30V, 80V, 160V models only)* Parallel Operation: Up to 3 units* High Efficiency and High Power Density* 1/2, 1/3, 1/6 Rack Mount Size Design (EIA/JIS Standard) for 360W/720W/1080W* Standard Interface:... | Programmable Switching DC Power Supplies |
|
|
|
GW INSTEK PSH Series | Features: Wide input voltage range and high power factor (P.F) high efficiency and high power density Constant voltage and constant current operation Over voltage over current and over temperature protection Low ripple and noise Output on/off control Self-test and software calibration Labview driver Standard interface : RS-232C Optional interface : GPIB ( IEEE-488.2 ) | Programmable Switching DC Power Supplies |
|
|
|
GW INSTEK PSU-Series | Features: -Voltage Rating:6V/12.5V/20V/40V/60V-Output Power Rating: 1200W~1520W-C.V / C.C Priority ; Particularly Suitable for the Batterey & LED industry-Adjustable Slew Rate -Series and Parallel operation (2 Units in Series or 4 units in parallel)-High Efficiency and High Power Density-19 Inch Rack Mount Size Design-Stabdard Interface: LAN, RS-232 & RS-485, USB(Device / Host), Analog Control Interface-Optional Interface:GPIB, Analog Control Interface(Isolated Voltage Control), Analog... | Programmable Switching DC Power Supplies |
|
|
|
GW INSTEK PSB-2000 Series | Features: -Output Volatge Rating:80V/800V -Output Power Rating:400W~800W-Constant Power Output for Multi-Range(V&I)Operation-Series and Parallel Operation(2 Units in Series or 4 Units in parallel Maximum) -Sequence function edited by PC will be controlled through power supply optional interface-Standard Interafce: RS-232C / USB / Analog Control Interface-Optional Interface: GPIB | Programmable Switching DC Power Supplies |
|
|
|
GW INSTEK PPS-3635 | Features: Easy Operation with UP/DOWN Key High Resolution: 10mV, 1mA Over Voltage Protection, Over Current Protection by Hardware 100 Sets of Memory Self Test and Software Calibration Meets UL CSA IEC Safety Regulation Auto Step Running With Time Setting FRONT/REAR Output and Sense Switch Selectable IEEE-488.2 and SCPI Compatible Command set Labview Driver Software High Stability, Low Drift 4 Digit Display | Programmable Linear D.C. Power Supply |
|
|
|
GW INSTEK PPE-3323 | Features: Easy operation with UP/DOWN key High resolution: 10mV, 1mA Over voltage protection, over current protection by software 50 Sets memory Self test and software calibration Meets UL, CSA, IEC safety regulation Auto step running with timer setting Triple output Auto tracking RS-232 communication High stability,low drift 4 digit display | Programmable Linear D.C. Power Supply |
|