|
Ammonium Ion Selective Electrode (US)
|
|
|
Ion Selective Electrodes
|
|
|
BANTE Fluoride Ion Selective Electrode (US)
|
|
|
Ion Selective Electrodes
|
|
|
Bante220 Portable pH/mV/°C/°F Meter
|
|
Bante220 is an economical portable pH/mV meter designed for
outdoor applications, which is equipped with a large LCD and
a standard BNC connecter. The meter is capable of connecting
the various pH electrodes to measure the pH value of samples.
Features:
2 points push-button calibration with auto-buffer recognition.
Automatically calculates and shows electrode slope after calibration.
Selectable temperature unit between degrees Celsiusanddegrees... |
pH Meters
|
|
|
Bante221 Portable pH/ORP/°C/°F Meter
|
|
Bante221 is a high performance portable pH/ORP meter designed
for outdoor applications. The meter contains a built-in setup menu
that provides many advanced and useful options to improve
accuracy of measurement and simplify operation.
Features:
During the pH mode, Up to 5 points push-button calibration with auto-
buffer recognition.
Selectable pH buffer standards and temperature units.
Automatically calculates and shows electrode slope... |
pH Meters
|
|
|
BANTE Dissolved Oxygen Probe
|
|
The Dissolved Oxygen Probe is great for biology, chemistry, ecology, or integrated science courses. It can be used to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment. |
Dissolved Oxygen Probe
|
|
|
BANTE DDS-12DW series Basic Conductivity Meter
|
|
DDS-W series conductivity meter are an easy-use basic meters
which used for measuring the electrical conductivity of liquids.
Automatic Calibration:
The meters can calibrate 1 point in each of the measuring ranges.
From Setup Menu, choose calibration and immerse the electrode
into standard calibration solution,press ENTER key and meter is
automatically calibrated.
Auto-Ranging:
The meters have auto-range function for measuring conductivity.
Upon immersing conductivity... |
Conductivity Meters
|
|
|
BANTE PHS-3BW series Basic pH/mV Meter
|
|
PHS-W series is an easy-use basic pH meter designed for daily
testing and controls are required.
Automatic Calibration:
The meters is capable of calibrating up to 2 points using USA or
NIST pH standard buffer. Press the CAL key to enter calibration
mode and immerse pH sensor into indicated calibration solutions,
press ENTER key and meter is automatically calibrated.
|
Oxidation Reduction Potential Meters
|
|
|
BANTE PHscan30L Pocket pH Tester
|
|
PHscan30L pocket pH tester is equipped with a long-reach pH
electrode that used to measures the liquids in the test tube.
Features:
Up to 3 points push-button calibration with auto-buffer recognition.
Selectable pH buffer standards and temperature units.
Manual temperature calibration.
Automatic Temperature Compensation provides accurate readings
over the entire pH range.
Hold function freezes... |
pH Meters
|
|
|
GW INSTEK GDS-3000 Series
|
|
Features
* 500/350/250/150MHz with 2/4 Channels* 5GSa/s RT or 100GSa/s ET Sampling Rate* Independent Memory for Each Channel * VPO Technology * Large 8-inch 800x600 Display * Split Screen Function * 3 Built-in Impedances (50Ω/75Ω/1MΩ)* Power Analysis Software (Optional)* Serial Bus Analysis Software for I2C, SPI and UART (Optional)
|
Digital Oscilloscopes
|
|
|
TES-1361C Datalogging Humidity/ Temperature Meter
|
|
Instant preformance of Humidity measurement by precision thin-film capacity sensor
Dual display LCD / Clock
Compact, light weight & Simple operation
7000 Record Data logging Capacity (Dual Reading)
RS-232 interface (software included)
|
Humidity / Temperature Meter
|
|
|
1341 Hot-Wire Anemometer
|
|
Fast Response Probe.
Air Flow Volume.
Instant / Avg / 2/3 Vmax Flow Measurement.
Velocity m/s, ft/min, knots, km/hr, mph.
Temperature & Humidity measurement.
Calculate Dew point temperature, Wet bulb temperature, Wind chill temperature, Humidex temperature and Heat index temperature.
Data hold & Maximum / Minimum function
Manual data memory and read function (10 x 99 sets).
LCD triple display.
Telescoping probe.
USB interface.
|
Anemometer
|
|
|
24 Gauge Teflon Insulated Thermocouple
|
|
24 gauge, teflon insulated, thermocouple with mini plug and welded tip. Available in type J, K, T, and E, with a 36" or 72" cable. |
Probes
|
|
|
275 HP High Voltage Testers H.V. Proximity Detector
|
|
H.V. Proximity Detector
8 voltage settings : 240Vac, 2kV, 3.3kV, 6kV, 11kV, 22kV, 33kV, 66kV, 132kV and 275kV. |
High voltage detectors
|
|
|
28-4W 4 WHEEL ROLLER FOR 25/28MM CAMERA AMG3017
|
|
|
X Videoscopes
|
|
|
28-8W 8 WHEEL ROLLER FOR 25/28MM CAMERA AMG3018
|
|
|
X Videoscopes
|
|
|
28BR CENTERING BRUSH FOR 25/28MM CAMERA AMG3016
|
|
|
X Videoscopes
|
|
|
290 HD High Voltage Testers H.V. Detector
|
|
290 HD High Voltage TestersH.V. Detector 6kV ~ 81.5kV |
High voltage detectors
|
|
|
304 SS 3/16" dia. Thermocouple Probe
|
|
304 SS 3/16" dia. Available in types J, K and T with a 6" or 12" sheath.
Temperature range for sheath: 900°C
Temperature range for lead wire: 260°C |
Probes
|
|
|
3B5700
|
|
150°C ½ AA High Temperature Battery |
Data Logger Batteries
|
|
|
52F Series Test Leads
|
|
● Terminal : 4mm banana plug● Wire: PVC UL 1803 or silicone Length : 1000±30mm Out diameter: 4mm Braid copper wires (170 of 0.08mm)● Remove test lead cap for attaching alligator clips● Rating : EN 61010-031:2002 + A1:2008 CAT IV 1000V 0.5A / CAT IV 690V 2A CAT IV 500V... |
Test-leads
|
|