|
YOKOGAWA A1002JC NDIS CONNECTOR
|
|
An NDIS connector for direct connection to a strain module. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA B8051DP FOR DL7400 SERIES
|
|
A transparent cover to protect the front panel. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA 50 OHM DC BLOCK 701975
|
|
This DC block can be used to remove the DC component from an incoming signal. Use this block if you want to remove bias voltage from reaching the PBL5000 probe. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA B9989FA FOR DL1700E/1600 SERIES
|
|
A transparent cover to protect the front panel. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA B8023EA FOR DL750
|
|
A transparent cover to protect the front panel. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA NDIS BRIDGE HEADS 701955/701956
|
|
NDIS cable (5 m) included
Bridge resistance:
120Ω (701955)
350Ω (701956)
Applicable for DL850 series, DL750/DL750P, SL1000 & SL1400 |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA CONVERSION ADAPTER 366921
|
|
BNC-Banana-jack (female) adapter. Use for circuits having voltage levels no greater than 42 V. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA CONVERSION ADAPTER 366922
|
|
Banana-plug (male)-BNC adapter. Use for circuits having voltage levels no greater than 42 V. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA T-ADAPTER 366923
|
|
T-adapter for BNC connectors. Use for circuits having voltage levels no greater than 42 V. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA CONVERSION ADAPTER 751512
|
|
Safety-terminal-binding-post adapter. Use for circuits having voltage levels no greater than 42 V. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA SMALL ALLIGATOR-CLIP ADAPTER 758922
|
|
Rated at 300 V. Attaches to the 758917 test leads. Sold in pairs.Applicable for DL750/DL750P, SL1000, SL1400 |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA B8050WP BATTERY BOX CONNECTION CABLE
|
|
For connection between DL1640 Series and 701680. Comes standard with the 701680 battery box. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA MEASUREMENT LEAD SET 758917
|
|
A set of 0.8m long red and black test leads, used in combination with a pair of optional 758922 or 758929 alligator-clip adapters. Appliable for DL750/DL750P & SL1400. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA A1105JC DC POWER SUPPLY CONNECTOR
|
|
For the DC power supply model (-DC). |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA B9852ES IC CLIP
|
|
Attached to the tips of logic probe (701988 or 701989) or mini-clips (B9852CR), the IC clips can be used to clip contiguous 0.5-mm pitch terminals. A total of 10 clips are included. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA B9852CR MINI CLIP CONVERTER
|
|
A clip set designed for the 700988, 700960 and 701940 probes. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA SAFETY BNC CABLE 701902/701903
|
|
701902: 1000 Vtms-CAT II (BNC-BNC), 1 m701903: 1000 Vrms-CAT II (BNC-BNC), 2 m
Applicable for DL750/DL750P, SL1000 & SL1400. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA LARGE ALLIGATOR-CLIP ADAPTER 758929
|
|
Rated at 1000V. Attaches to the 758917 test leads. Sold in pairs.Applicable for DL750/DL750P, SL1000, SL1400. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA MATLAB TOOL KIT FOR DL SERIES (701991)
|
|
This MATLAB tool kit enables DL and SL series instruments to easily interface with MATLAB. The software can be used to transfer data from DL and SL series instruments to MATLAB via GP-IB, USB or Ethernet.
MATLAB tool kit (Model: 701991) ver. 2.20 released. |
OSCILLOSCOPES APPLICATION SOFTWARE
|
|
|
YOKOGAWA XVIEWER (701992) / XVIWERLITE (FREE SOFTWARE)
|
|
Xviewer lets you transfer files between the DL series instruments and a PC, and gives you remote control of the instruments using your PC. Xviewer enables offline waveform display, computation, and analysis of data captured using Yokogawa's WE7000 series of PC-based measurement instruments.Free version, XviewerLITE is also avaiable.
What's New!Software version update 1.77 |
OSCILLOSCOPES APPLICATION SOFTWARE
|
|