• Filter
Created on: 17 May 2013

Accurate to ± 3%" of full scale @ 25º C Detects CO, NO2, O2, H2, H2S, CH4 and C3H8 Provides real-time reading of gas values display Activates horns, strobes or fans via two on-board relays Utilizes plug-and-play sensor cartridge Options include wall or duct mount; 120 VAC version CAN/CSA-C22.2 NO. 61010-1; UL 61010 approve    

Created on: 30 January 2014

The Wind101A is a complete system to accurately measure and record wind speed. This low cost wind speed recording system comes complete with the Pulse101A data logger, weatherproof enclosure, a three-cup anemometer and all the necessary cabling to quickly get up-and-running. The Pulse101A data logger can measure and record data for up to 500,000 readings and the storage medium is non-volatile, solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from a computer using our user-friendly software.

Category: Wind
Created on: 31 January 2014

The Wind101A is a complete system to accurately measure and record wind speed. This low cost wind speed recording system comes complete with the Pulse101A data logger, weatherproof enclosure, a three-cup anemometer and all the necessary cabling to quickly get up-and-running. The Pulse101A data logger can measure and record data for up to 500,000 readings and the storage medium is non-volatile, solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from a computer using our user-friendly software.

Category: Enclosures
Created on: 01 February 2014

The WaterBox101A is a weatherproof enclosure designed for use with MadgeTech’s 101A series data loggers. The enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The WaterBox101A is machined out of black anodized aluminum, and has four oval mounting holes for easy surface attachment. The enclosure features a water-tight communication access plug with chain attachment, stainless steel probe outlet and a clear plastic cover. To use, simply unscrew the 6 hex screws and insert the data logger. Loosen the compression fitting and thread the sensor lead wire through the fitting. Attach the probe to the data logger and insert and tighten the six screws again, and it’s ready to use.

Category: Enclosures
Created on: 01 February 2014

The Waterbox110C is a water resistant enclosure designed for use with the 110 series data loggers. This enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The Waterbox110C is machined out of black anodized aluminum, and is wall mountable. The enclosure features a water-tight communication access plug and cable gland outlet. To use, simply unscrew the 4 hex screws and insert the data logger. Loosen the compression fitting and thread the sensor lead wire through the fitting. Attach the probe to the data logger and insert, then tighten the six screws again and it’s ready to use.

Category: Weather
Created on: 01 February 2014

Maintenance kit for the Waterbox101A. This kit comes with 6 hex screws, a replacement O-ring, an allen wrench and a water-tight communication access plug.

Category: O-Rings
Created on: 01 February 2014

Maintenance kit for the Waterbox101A. This kit comes with 6 hex screws, a replacement O-ring, an allen wrench and a water-tight communication access plug.

Category: O-Rings
Created on: 01 February 2014

One set of replacement o-rings for the Waterbox101A.