|
TEN007-TM-2013V3 TRMS AC/DC CLAMP METER ACA DCA 660A
|
|
CAT IV 600V, CAT III 1000V LCD backlit display, with maximum reading of 6600. AC voltage range: 0 to 750V. AC current range: 0 to 660A. DC voltage range: 0 to 1000V. DC Current: 0 to 660A. Resistance measurement to 66 megohms. Data Hold, Min/Max, Autoranging, DCA Zero. Test Ranges: ACV, ACA, Resistance, Frequency, Diode, Continuity. Work light. Auto Power Off. Double Injection outer case. |
Clamp meters
|
|
|
TEN008-TM-1016V3 AC-HVAC VOLT/AMP/TEMP CLAMP METER WITH TEMPERATURE
|
|
CAT III 600V 3-3/4 digit LCD Backlit Display, with Analog Bargraph. Display Counts: 4000. Auto Ranging. AC/DC current: 0.1µA to 4000µA. (using test leads). AC current: 0.01A to 400A (using jaw measurement). Ranges: ACV, ACA, DCV, DCA, Resistance, Continuity, Capacitance, and Temperature. Maximum conductor size 30mm. Continuity test below 40 ohms, buzzer will sound. Auto Power off. Double injection outer case. |
Clamp meters
|
|
|
TEN010-TM-1017V3 400A TRUE-RMS AC POWER CLAMP METER + PHASE ROTATION
|
|
CAT III 600V Maximum conductor size 30mm. Display counts: 4000. Measures: ACV, DCV, ACA. Measures Phase Sequence. Voltage/Current Harmonics to 25th with THD. W3ø, HV, HA, Phase SEQ, Audible continuity tests. Frequency to 400Hz. Active, Reactive, Apparent power/ energy on. Power Factor, cosø on Single/Three phase systems. Phase sequence. |
Clamp meters
|
|
|
TEN011-400A-AC/DC Current Transducer
|
|
Product Description
CAT III 600V AC/DC current ranges 40A and 400A. Maximum conductor size 30mm. Low battery indication. |
Clamp meters
|
|
|
Tenmars ST-105
|
|
Model No.: : ST-105
Product Description
- Statistic analysis. - 24HR measurement. - Integral measurement. - Real time analyzer in 1/1 and 1/3 octave band. - Simultaneously measures A, C, Z and F, S, Impulse. - Measurement function: Lxyp, (Lxyi), Lxeq,1s, Lxeq, T, LAE, E,Cpeak+, Cpeak- , LAFmax, LAFmin, LAFeqT, LASeqT, LAIeqT, Laeq(20Hz~200Hz). - USB Datalogger with 128 records capacity. - Real time clock with calendar. - Sampling Frequency: 20.8us(48KHz). - Wide Frequency range: 10Hz~20KHz.... |
Class 1 Integrating Sound Analyzer Meter
|
|
|
Tenmars ST-106 Class 1 Integrating Sound Level Meter
|
|
Model No.: : ST-106
Product Description
- The ST-106 is high performance Class 1 integrating sound level meter. It measures Lxyi, Lxyp, Lxeq, Lxmax, Lxmin, LAE, Lcpeak, Lzpeak functions simultaneously - Fast, Slow, Impulse response time. - Sampling frequency: 20.8 us(48KHz). - Wide frequency range: 10Hz~16KHz. - Wide measurement range: 30dB~130dB. - Wide dynamic range:110 dB. - A/C/Z frequency weighting. |
Class 1 Integrating Sound Analyzer Meter
|
|
|
Tenmars ST-120 Class1 Sound Level Calibrator
|
|
Model No.: : ST-120
Product Description
IEC 60942:2003 Class1/ANSI S1.40-1984. ● Output sound level : at 94dB and 114dB. ● Frequency : 1KHZ ±1%, Class1, A ● Accuracy : 94±0.3dB 114±0.5dB Specifications ● Sound pressure levels : at 94dB and 114dB. ● For 1/2" condenser microphone calibration. ● Low battery indication. ● Harmonic waves distortion ±3%. ● Output feedback detection. ● Power: 9V battery 006P or IEC6F22 or NEDA 1604 ● Operation environments : 23.0oC ±3oC... |
Class 1 Integrating Sound Analyzer Meter
|
|
|
Tenmars ST-109 Class 1 Sound Level Meter
|
|
Model No.: : ST-109
Product Description
- Frequency range: 10Hz ~20KHz. - Measurement range:30dB~130dB. - Dynamic range:100dB. - A/C/Z frequency weighting. - Fast, Slow, Impulse Peak response time. - DC & AC Output. - Bargraph display. - USB interface. - Storage 37,000 records, auto-mating transfer to micro SD card. - Comply with the following standards: IEC 61672-1 : 2002 Class1 ANSI S1.4 Type 1 CNS NO.7129 Type 1 JJG-188-2002 Class1 |
Class 1 Integrating Sound Analyzer Meter
|
|
|
Tenmars ST-107S Class 2 Integrating Sound Level Meter
|
|
Model No.: : ST-107S
Product Description
- Comply with IEC-61672-1 2002 Class 2 - Fast, Slow, Impulse response time. - Frequency range: 31.5Hz ~8KHz. - Measurement range: 30dB~130dB. - Dynamic range:100dB. - A/C/Z frequency - Storage up to 32,000 records. - USB interface. - AC and DC output. - Bargraph display. |
Class 1 Integrating Sound Analyzer Meter
|
|
|
TES- 1370 NDIR CO 2 METER
|
|
CO 2 : 0 ~ 6,000 ppm range, Diffusion sampling mode.
Three LCD Display for CO 2 , %RH Humidity and Air Temperature.
Maintenance free dual wavelength NDIR infrared CO 2 sensor (non-dispersive infrared).
Continuous or manual data logging (20,000 sets).
Data hold & Maximum / Minimum with Time stamp.
Data Memory and READ function.
Alarm and Time setting.
RS-232 function / Software.
Backlight display function.
Simple and safe to use.
|
CO 2 Tester
|
|
|
Tenmars TM-801 CO Meter
|
|
Model No.: : TM-801
Product Description
- 4 digits backlit LCD with maximum 1,000 counts. - Dual display of the readings for CO and Temperature. - CO range: 0 ~ 1,000ppm. - Temperature range: -20~50 ºC (-4~122 ºF). - Easy to calibrate at 100ppm or 500ppm. - USB datalogger with 8,000 records (TM-802). |
CO Meter
|
|
|
Testo 315-2 (0632 0317) CO Tester
|
|
Reliable warning of CO poisoning
DVGW approval
Adjustment of different alarm limits
Printout with date/time and recommended value (alarm limit)
With calibration protocol
TopSafe, protection case for tough applications
Quick and practical documentation of data on location, printout with date/time and recommended value (alarm limit)
|
CO Meters
|
|
|
Testo 317-3 (0632 3173) CO Monitor for carbon monoxide detection
|
|
3 year warranty on CO cell
Visual and audible alarm
No zeroing required, just turn it onto measure
Adjustable alarm threshold
Self-test mode verifies CO sensor function anytime, anywhere without the need for test gas
|
CO Meters
|
|
|
Tenmars TM-186/TM-187 Large LED Screen CO2/Temp/RH Monitor
|
|
Model No.: : TM-186_TM-187
Product Description
- Large LED display. - Measurement: CO2, temp. and humidity. - The selection of °C or °F. - Real time data. - Data Hold function. - Alarm function. MODEL#: TM-186, TM-186D TM-187, TM-187D |
CO2/ Temp./ RH Monitor
|
|
|
Tenmars ST-501 _ CO2/Temp./RH Monitor
|
|
Model No.: : ST-501
Product Description
- 3 Independent CO2, humidity and temperature sensors. - User operated CO2 calibration. - USB datalogg: 50,000 records. - Internal backup battery to maintain date/time setting. - Power management IC to increase batter efficiency. - Easy- to-Use PC software for parameter settings and data analysis. - Internal CO2 alarm buzzer. |
CO2/ Temp./ RH Monitor
|
|
|
TES-135 Color Meter
|
|
Check the color difference between two samples.
Color difference displayed
Δ(L*,a*,b*)
Δ(E*ab,C*ab, H*ab)
Δ(Y, x, y)
Δ(X, Y, Z) or
Δ(Rs, Gs, Bs)
Color space displayed
(L*, a*, b*)
(L*, C*ab, hab)
(Y, x, y)
(X, Y, Z) or
(Rs, Gs, Bs)
Maximum, Minimum and Average function.
Tolerance function.
Auto memory (99 sets) & Read function.
RS232 interface.
|
Color Meter
|
|
|
TES0082-DIGITAL GUN-TYPE COLOR METER WITH MAX,MIN,AVG FUNCTION
|
|
Check the color difference between two samples.
Color difference displayed
Δ(L*,a*,b*)
Δ(E*ab,C*ab, H*ab)
Δ(Y, x, y)
Δ(X, Y, Z) or
Δ(Rs, Gs, Bs)
Color space displayed
(L*, a*, b*)
(L*, C*ab, hab)
(Y, x, y)
(X, Y, Z) or
(Rs, Gs, Bs)
Maximum, Minimum and Average function.
Tolerance function.
Auto memory (99 sets) & Read function.
RS232 interface.
|
Colour meters
|
|
|
Testo 310 Combustion Analyzers
|
|
The Testo 310 can stand up to the toughest job site
Five-line backlit display with two-line readout and easy-to-navigate menu
30 second start-up time
Work all day with a 10-hour rechargable battery
Quick swapable replacement filters
Powerful magnets in the 310 allows for hands-free operation
Easy emptying of the integrated condensate trap
Wireless printer option with integrated magnets
|
Combustion Analyzers
|
|
|
Testo 320 Combustion Analyzers
|
|
High-definition & easy to understand graphic display
Simple "Traffic Light" sensor diagnostics & monitoring
30 second start-up time
Ultra-rugged & hard rubberized housing to withstand work-place abuse
Work all day with Lithium rechargable battery technology
Internally housed magnets for hands-free operation
Easy to see & replace probe filters
Hardened cam-lock fittings that are leak-free
Replacable sensors that last up to 3 years
Stores up to 500 tests with on-site... |
Combustion Analyzers
|
|
|
Testo 330-Series Combustion Analyzers and Kits
|
|
Intuitive graphic Display
Simple graphics alert you when combustion parameters are out of range
Long-life Sensors with over-range protection
Measure CO up to 30,000 ppm
Instument diagnostics and quick leak check at the touch of a button
On-board memory for up to 500,000 readings
Optional EasyHeat Software for data management
20 selectable fuels with 10 user defined fuels
A USB interface for data readout to PC
Optional probes for:
Differential Temp.
Gas Leak
330-2G Optional... |
Combustion Analyzers
|
|