• Filter
  Name SKU Description Category
Hioki Bare Board HiTester 1232-11 High-Precision Batch Fixture-Type Testing System that Support Boards with Embedded Passive and Active Devices The 1231-11 is a bare board tester that utilizes the full range of Hioki’s in-circuit testing technologies to deliver LSI reliability testing, complex component separation testing, high continuity and insulation testing, and more. Bare Board Testing
Hioki Bare Board HiTester 1236-11 Super-High-Speed Testing System for Boards with Embedded Passive and Active Devices Utilizing the Index Table Method The 1236-11 is a bare board test system that harnesses Hioki’s populated board testing technology and includes support for next-generation boards with embedded passive and active devices. It features mass-production capabilities that uses test heads (test fixtures) to test fine pitch boards. Bare Board Testing
Hioki Battery HiTester 3554 3 mΩ to 3 Ω/60V Handheld Battery Tester for Diagnosing and Managing UPS Batteries Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The 3554 sets the standard for assessing the deterioration and remaining life of lead-acid batteries by giving a complete diagnosis via battery resistance testing. The thresholds for determining the pass/fail condition of a battery depends on the specifications and standards of... LCR | Resistance | Battery Testers
Hioki Battery HiTester 3555 300 mΩ to 30 Ω/30V Portable Battery Tester for Testing Compact Storage Batteries for Mobile Devices Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The 3551 tests high-capacity alkali and lead-acid storage batteries used in mobile devices, up to 30V. The 3555 cannot make PASS/FAIL judgments for lithium-ion batteries due to the extremely small magnitude of the changes in their internal resistance. For... LCR | Resistance | Battery Testers
Hioki Battery HiTester 3561 Series 300 mΩ to 3Ω/20V DC Battery Resistance Testers for High-Speed Production Line Testing of Small Battery Packs for Mobile Devices Hioki benchtop battery testers support simultaneous high-speed measurement of internal resistance and battery voltage for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications. The 3561 is a high-speed device ideal for the production line testing of small secondary... LCR | Resistance | Battery Testers
Hioki Battery HiTester BT3562 Series 3 mΩ to 3000 Ω/60V DC Battery Resistance Testers for Production Line Testing of Battery Packs and Modules Hioki benchtop battery testers support simultaneous high-speed measurement of internal resistance and battery voltage for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications. The BT3562 series can measure the voltage and resistance of coin-size to large-cell batteries up to 60V almost... LCR | Resistance | Battery Testers
Hioki Battery HiTester BT3563 Series 3 mΩ to 3000 Ω/300V DC Battery Resistance Testers for Production Line Testing of High Voltage Battery Packs and Modules Hioki benchtop battery testers support simultaneous high-speed measurement of internal resistance and battery voltage for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications. The BT3563 series can measure the voltage and resistance of battery modules, high voltage battery... LCR | Resistance | Battery Testers
Hioki C HiTester 3504 Series Dual-band 1kHz/1MHz Capacitance Tester for High Speed Inspection of Multi-Layer Ceramic Capacitors (MLCC) on Taping Machines Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in the testing of electronic components. The 3504 series are dual-band capacitance testers suited for large-capacitance MLCC inspections using a constant voltage. 3504-40: Basic model 3504-50: Adds GP-IB and BIN function 3504-60: Adds GP-IB, BIN function, and Contact... LCR | Resistance | Battery Testers
Hioki C Meter 3506-10 Dual-band 1kHz/1MHz Capacitance Tester for High Speed Testing of Ceramic Capacitors on Production Lines Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in the testing of electronic components. The 3506-10 is a dual-band capacitance tester designed to be integrated with automatic taping machines and sorters for production of MLCC (multi-layer ceramic capacitors). This product is not supplied with measurement probes or test fixtures.... LCR | Resistance | Battery Testers
Hioki Can Adapter 8910 Convert CAN Bus Signals Across 12 Channels and Further Analyze Using Recorders or Data Loggers CAN (Controller Area Network) Bus is an automotive bus standard or protocol designed to allow microcontrollers and devices to communicate with each other within a vehicle without a host computer, allowing vehicle systems and sensors to communicate at very high speeds and minimizing the wiring in the vehicle. The 8910 CAN Adapter accepts signals from a CAN Bus and converts them to analog or logic... Memory Recorders | Oscilloscopes | Data Acquisition
Hioki Card Hitester 3244-60 Card-style Pocket DMM for General Electrical Maintenance and Testing The 3244-60 is a card-style digital multimeter for general electrical maintenance and testing, and includes gold-plated test leads for better contact. Insulated test pin sleeves also prevent short-circuits. Digital Multimeters (DMM) | Handheld Testers
Hioki Chemical Impedance Analyzer IM3590 Wide band 1mHz to 200kHz Chemical Impedance Analyzer for Testing Electrochemical Components and Materials, Batteries, and EDLC Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in the testing of electronic components. The IM3590 is an advanced component tester especially suited to electrochemical impedance measurements and includes a variety of graphing functions that are needed for battery and chemical material testing. This product is... LCR | Resistance | Battery Testers
Hioki Clamp Logger LR5051 2-channel Current Logger to Easily Record Load Current of 50/60Hz Lines and Leak Current Hioki compact 1 or 2-channel data loggers feature a 60,000 data set/channel memory to measure temperature, humidity, voltage or instrumentation signals. The LR5051 logs current over 2 channels in as fast as 1 second intervals. Customers using the previous Model 3636-20 Clamp Logger should note that the LR5051 can only record 15,000 points of average data, vs. 32,000 data points available in the 3636-20.... Multi-channel Data Loggers
Hioki Clamp meters (Malaysia) All range of Hioki clamp from Japan. Clamp meters
Hioki Clamp on AC/DC HiTester 3285, 3285-20 200A/2000A AC/DC Clamp Meters with Continuity Check and Resistance Testing or Analog Output Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 3285 and 3285-10 measure DC, AC or AC+DC current in live power lines without tapping into or connecting the lines, and includes a variety of features and functions including automatic zero adjustment that turns a normally troublesome task into a one-touch operation. Model 3285... Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
Hioki Clamp on AC/DC HiTester 3287 10A/100A AC/DC Clamp Meter with Continuity Check and Resistance Testing Capabilities Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The Hioki 3287 is an AC/DC current and voltage clamp meter that also measures continuity and resistance, featuring a double jaw lever and slim profile for easy access to crowded wires. Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
Hioki Clamp on AC/DC HiTester 3288, 3288-20 100A/1000A AC/DC Clamp Meters with Continuity Check and Resistance Testing Capabilities Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 3288 and 3288-10 are AC/DC current and voltage clamp meters that also measures continuity and resistance, featuring a double jaw lever and slim profile for easy access to crowded wires. Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
Hioki Clamp on AC/DC HiTester 3290, 3290-10 20A to 2000A AC/DC Clamp Meter System with Waveform Output Function and Wide 1.00Hz to 1000Hz Bandwidth Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 3290 and 3290-10 feature detachable clamp sensors to offer a maximum 2000A current range. Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
Hioki Clamp on AC/DC HiTester- 3284 20A/200A AC/DC Clamp Meters with Analog Output and Peak Hold for Inrush Measurement Applications Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 3284 is an AC/DC current and voltage clamp meter with analog output capabilities and a peak hold function. Clamp Meters | Clamp Multimeters | Electrical Clamp Meters
Hioki Clamp ON AC/DC Sensor CT9691, CT9691-90 DC to 10 kHz/100A AC/DC Clamp On Current Probe Hioki AC/DC clamp sensors are best-in-class current sensors for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT9691 and CT9691-90 with sensor unit attachment is a DC to 10kHz/100A sensor, ideal for capturing current signals from solar power generation systems, UPS and batteries. • CT9691 (Clamp on AC/DC Sensor only) • CT9691-90 (CT6590 bundled with CT9691) Note 1: Cannot be used alone. To use the CT9691... High Frequency Sensors | CTs | Current Probes