|
Fluke 787 ProcessMeter™
|
|
DMM and loop calibrator in one tool
Precision 1000V, 440 mA digital multimeter
Measure ac and dc volts, ac and dc current, resistance, continuity, and frequency
0.1% dc voltage accuracy
0.05% dc current accuracy, 1 A resolution to 30 mA
Simultaneous mA and % of scale readout
True rms ac voltage measurement to 1 kHz
Frequency measurement to 20 kHz
Min/Max/Average/TouchHold/Relative modes
Diode test and continuity beeper
DC current source/loop calibrator
20 mA current... |
Calibrators
|
|
|
Fluke 789 ProcessMeter
|
|
24 V Loop power supply
HART mode setting with loop power (adds 250 ohm resistor)
100 % larger dual display
1,200 ohm drive capability on mA source
Enhanced backlight with two brightness settings
0-100 % mA Span Check buttons to toggle between 4 and 20 mA
Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1 (available Feb. 2003)
Externally accessible fuses for easy replacement
DMM designed to meet 1000 volt IEC 1010 CAT III standards
Precision 1000 V, 440 mA... |
Calibrators
|
|
|
Fluke 700P00 Differential Module
|
|
Display pressure readings in any of 10 different pressure units you specify in the calibrator setup
Rugged urethane molded case protects the module from rough handling and harsh conditions
Features internal temperature compensation from 0°C to 50°C for full-accuracy performance
Includes NIST-traceable calibration certificate
Module can be calibrated locally using the Fluke 700PCK Pressure Calibration Kit, a PC, and a precision pressure source
One year warranty
|
Calibrators
|
|
|
Fluke 700P01EX Differential Pressure Module
|
|
Display pressure readings in any of 10 different pressure units you specify in the calibrator setup
Rugged urethane molded case protects the module from rough handling and harsh conditions
Features internal temperature compensation from 0°C to 50°C for full-accuracy performance
Includes NIST-traceable calibration certificate
Module can be calibrated locally using the Fluke 700PCK Pressure Calibration Kit, a PC, and a precision pressure source
Certified by CSA: I.S. Class I, Div 1,... |
Calibrators
|
|
|
Fluke CO-220 Carbon Monoxide Meter
|
|
Rugged case and electronics
Large LCD displays CO levels from 0 to 1000 ppm
Bright back-light allows easy screen viewing under dim lighting conditions
Beeper triggers with increasing frequency as CO levels rise
MAX Hold function stores and displays the maximum CO level
Automatic sensor zeroing and self-test sequence upon start-up
CO level beeper can be silenced if desired
Automatic power-off after 20 minutes extends battery life
Easy to replace battery
Replaceable sensor extends... |
Carbon Monoxide Meter
|
|
|
Fluke Priority Gold Instrument CarePlan For Thermal Imagers
|
|
Repairs are always unexpected, and they can be costly. Keep your camera in top operating condition and control your cost of ownership with a Fluke Gold CarePlan. Maintain you camera in peak operating condition and protect your investment beyond your factory warranty for up to three additional years. |
CarePlans & warranties
|
|
|
Fluke Silver Instrument CarePlan For Thermal Imagers
|
|
Repairs are always unexpected, and they can be costly. Keep your camera in top operating condition and control your cost of ownership with a Fluke Silver CarePlan. Maintain you camera in peak operating condition and protect your investment beyond your factory warranty for up to three additional years. |
CarePlans & warranties
|
|
|
Fluke Bronze Instrument CarePlan For Thermal Imagers
|
|
Repairs are always unexpected, and they can be costly. Keep your camera in top operating condition and control your cost of ownership with a Fluke Bronze CarePlan. Maintain you camera in peak operating condition and protect your investment beyond your factory warranty for up to three additional years. |
CarePlans & warranties
|
|
|
Fluke Priority Gold Instrument CarePlans For Handheld Instruments
|
|
Repairs are always unexpected, and they can be costly. Keep your Fluke Instruments in top operating condition and control your cost of ownership with a Fluke Gold CarePlan. Fluke CarePlans are easy to purchase and register. Maintain your Fluke handheld in peak operating condition and protect your investment beyond your factory warranty. |
CarePlans & warranties
|
|
|
Fluke Silver Instrument CarePlans For Handheld Instruments
|
|
Repairs are always unexpected, and they can be costly. Keep your Fluke Instruments in top operating condition and control your cost of ownership with a Fluke Silver CarePlan. Fluke CarePlans are easy to purchase and register. Maintain your Fluke handheld in peak operating condition and protect your investment beyond your factory warranty. |
CarePlans & warranties
|
|
|
Fluke 62 Max+ Infrared Thermometer with Dual-point Laser Sighting 30°C to 650°C, 12:1 ratio, ±1% Accuracy
|
|
Wide temperature range from -30° to 650°C (–20° to 1202°F)
12:1 distance-to-spot ratio
±1% Accuracy of the reading.
Dual lasers to accurately identify spot size
Rugged performance
Survives 9.8 foot/3 meter drops to wood floors
Water and dust resistance
IP54 rated to withstand rain, splashing liquids, dust and dirt
Small and easy to use
Ergonomic fit to "feel" good in your hand
Multi-angle
Backlit display
|
Combo Test Kits
|
|
|
Fluke 116 HVAC Multimeter with Temperature and Microamps
|
|
Built in thermometer for HVAC applications
Microamps to test flame sensors
LoZ: helps prevent false readings due to ghost voltage
Large white LED backlight to work in poorly lit areas
Resistance, continuity, frequency and capacitance
Min/Max/Average with elapsed time to record signal fluctuations
Compact ergonomic design for one-handed operation
Compatible with optional magnetic hanger (ToolPak™)
CAT III 600 V safety rated
|
Combo Test Kits
|
|
|
Fluke C115 Soft Carrying Case
|
|
Includes two padded pockets for protection of two test tools, such as a digital multimeter and 60 Series IR thermometer and a pouch for test leads and other accessories.
Durable polyester 600D case construction for long life.
Compatible with Fluke 20, 70, 11X, 170 Series digital multimeters and other similar format test tools.
One-year warranty.
|
Combo Test Kits
|
|
|
Fluke 80AK-A DMM Thermocouple Adapter
|
|
Adapts Type-K thermocouple mini-connector to dual banana plug inputs
Measurement range and accuracy: probe dependent
Suitable for low voltage applications (below 30 V AC, 60 V DC)
One year warranty
|
Combo Test Kits
|
|
|
Fluke 80BK-A Integrated DMM Temperature Probe
|
|
Type-K thermocouple with standard shrouded banana jack
Convenient one piece construction
Compatible with DMMs with temperature measurement functions
Measurement range:-40 to 260ºC
One year warranty
|
Combo Test Kits
|
|
|
Fluke TPAK ToolPak, Meter Hanging Kit
|
|
Kit includes: 9 inch hook and loop strap, universal hanger clip, hook hanger for non magnetic surfaces and a strong magnet.
Solves almost any hanging and positioning problem you may face.
The universal hanger allows you to hang your meter on nails, hooks and many other objects.
Compatible with many Fluke instruments.
One year warranty.
|
Combo Test Kits
|
|
|
Fluke 80PK-11 Type-K Flexible Cuff Thermocouple Temperature Probe
|
|
Designed for hands free measurement of HVAC temperature measuring applications
Use multiple and leave in place for route based routine maintenance
Use with any temperature-measuring instrument designed to accept Type-K thermocouples
|
Combo Test Kits
|
|
|
Fluke 117/323 Electricians Multimeter Combo Kit True RMS Multimeter and Clamp Meter Kit
|
|
Fluke 117 Digital Multimeter.
VoltAlert™ technology for non-contact voltage detection.
AutoVolt automatic ac/dc voltage selection.
Low input impedance: Helps prevent false readings due to ghost voltage.
Large white LED backlight to work in poorly lit areas.
True-rms for accurate measurements on non-linear loads.
Measures 10 A (20 A overload for 30-seconds).
Resistance, continuity, frequency and capacitance.
Min/Max/Average to record signal fluctuations.
Compact ergonomic design for... |
Combo Test Kits
|
|
|
Fluke 179/61 Electricians Combo Kit Multimeter and Infrared Thermometer Kit
|
|
The Fluke 179/61 Multimeter and Infrared Thermometer Combo Kit was created for industrial, HVAC, and facility maintenance. Rugged true-rms multimeter with a built-in thermometer to troubleshoot electrical and electromechanical problems plus a laser guided, non-contact infrared thermometer for measuring rotating or energized equipment, packed in a durable carrying case. |
Combo Test Kits
|
|
|
Fluke 179/1AC-II Electricians Combo Kit Multimeter and Non-Contact Voltage Tester Kit
|
|
Fluke 179 True-rms Digital Multimeter w/ Temperature (More Info >>)
True-rms ac voltage and current measurement for accurate readings on all waveforms
Frequency, capacitance and resistance capabilities
Min/Max/Average records irregular activity
Backlight to illuminate the screen in dark workspaces
Measures temperature in °C and °F
IEC 1010 CAT IV 600 V, CAT III 1000 V safety ratings
Limited lifetime warranty
Auto and manual hold for later reference
Easy-access... |
Combo Test Kits
|
|