|
Fluke i1000s AC Current Probe
|
|
Current Range: 100mA to 1000 Arms
Basic Accuracy 48Hz to 65Hz:
10A Range +/- 3% of reading + 0.1A, 100mV/A output
100A Range +/- 2% of reading + 0.5A, 10mV/A output
1000A Range +/- 1% of reading + 1A, 1mV/A output
Bandwidth: 5Hz to 100kHz
Working Voltage: 600V AC rms
Maximum Conductor Size: 54 mm (2.13 inch) diameter
Safety Rating: 600V rms. CAT III per IEC 1010-02-032
|
Current Clamps
|
|
|
Fluke FOS-850/1300 Fiber Optic Light Source
|
|
A variety of light sources allow you to test different cable lengths.
One year warranty
|
Fiber Optics
|
|
|
Fluke Bronze Instrument CarePlan For Thermal Imagers
|
|
Repairs are always unexpected, and they can be costly. Keep your camera in top operating condition and control your cost of ownership with a Fluke Bronze CarePlan. Maintain you camera in peak operating condition and protect your investment beyond your factory warranty for up to three additional years. |
CarePlans & warranties
|
|
|
Fluke C115 Soft Carrying Case
|
|
Includes two padded pockets for protection of two test tools, such as a digital multimeter and 60 Series IR thermometer and a pouch for test leads and other accessories.
Durable polyester 600D case construction for long life.
Compatible with Fluke 20, 70, 11X, 170 Series digital multimeters and other similar format test tools.
One-year warranty.
|
Combo Test Kits
|
|
|
Fluke 80K-40 High Voltage Probe
|
|
A high voltage probe that allows a multimeter to measure up to 40,000V respectively.
Intended for low energy applications only
One year warranty
|
High Voltage Probes
|
|
|
Fluke i1000s AC Current Probe
|
|
Current Range: 100mA to 1000 Arms
Basic Accuracy 48Hz to 65Hz:
10A Range +/- 3% of reading + 0.1A, 100mV/A output
100A Range +/- 2% of reading + 0.5A, 10mV/A output
1000A Range +/- 1% of reading + 1A, 1mV/A output
Bandwidth: 5Hz to 100kHz
Working Voltage: 600V AC rms
Maximum Conductor Size: 54 mm (2.13 inch) diameter
Safety Rating: 600V rms. CAT III per IEC 1010-02-032
|
Current Clamp DMM Accys
|
|
|
Fluke 323 400A AC, 600V AC/DC True-RMS Clamp Meter
|
|
400 A AC current measurement
600 V AC & DC voltage measurement
True-rms ac voltage and current for accurate measurements on non-linear signals
Resistance measurement up to 40 kΩ with continuity detection
Features:
Slim, ergonomic design
CAT IV 300V/CAT III 600 V safety rating
Hold button
Two-year warranty
Soft carrying case
|
Current Clamp Meters
|
|
|
Fluke L206 Deluxe LED Hat Light
|
|
3 super bright white LEDs
360° Rotating clip
Special hard-hat attachment included
40-hour battery life
Water resistant
Durable polymer construction Rubber shielded Bezel
Also includes a neck lanyard
Hats not included with Deluxe LED Hat Light L206
|
Lights for Probes and Hats
|
|
|
Fluke 075-CLKTO 3" (75mm) C-Range Indoor Infrared (IR) Window, Medium Voltage, with Kwik Twist Cover
|
|
Impact resistant viewing pane compliant to ANSI C37.20.2 for indoor switchgear up to 72 kV
CLKTO IR Windows from Fluke use the unique Quadraband multispectral optic, allowing inspection with any camera for total flexibility both now and in the future
Certified by UL and CSA as suitable for Type 1 (Indoor) environment in North America, these C-Range windows are tested to withstand the long term aging effects of UV exposure
The CLIRVU coating—exclusive to Fluke Windows—seals the optic... |
Infrared (IR) Windows
|
|
|
Fluke 115 TRMS Digital Multimeter
|
|
Resistance, continuity, frequency, capacitance, and diode test
Measures 20 A (30 seconds momentary; 10 A continuous)
Large white LED backlight to work in poorly lit areas
Compact ergonomic design for one-handed operation
Compatible with optional magnetic hanger (ToolPak™)
True-rms for accurate measurements on non-linear loads
Min/Max/Average with elapsed time to record signal fluctuations
CAT III 600 V safety rated
|
Digital Multimeters
|
|
|
Fluke Bronze Instrument CarePlan For Thermal Imagers
|
|
Repairs are always unexpected, and they can be costly. Keep your camera in top operating condition and control your cost of ownership with a Fluke Bronze CarePlan. Maintain you camera in peak operating condition and protect your investment beyond your factory warranty for up to three additional years.
Bronze CarePlan features
One to Three year extended warranty coverage beyond your original factory warranty
Performance check on needed repair
First-on-Bench priority handling
Discount on... |
Instrument CarePlans (for Thermal Imagers)
|
|
|
Fluke 1LAC-A-II Non-Contact Voltage Detectors
|
|
Fits in a shirt pocket for convenience
Choose a model to detect 20 - 90 Volts or 90 - 1000 Volts AC
Model 1AC-A1-II, 90 to 1000 VAC
Model 1LAC-A-II, 20 to 90 VAC
All outer surfaces are non-conductive for safety
Detects voltage without metallic contact
Quickly locates the hot, neutral and ground terminals in any receptacle. (1AC only)
2 Year Warranty
|
Electrical Testers
|
|
|
Fluke PM9081001 Dual Banana Plug (male) to Female BNC Adapter
|
|
Dual Banana Plug 4 mm male to female BNC Adapter
Consists of two adapters
Maximum Signal Voltage: 300V rms
Maximum Voltage to Ground: 600V rms
CAT III per IEC 61010-031
|
Options
|
|
|
Fluke 1735 3-Phase Power Logger
|
|
Record power and associated parameters for up to 45 days
Monitor maximum power demand over user-defined averaging periods
Prove the benefit of efficiency improvements with energy consumption tests
Measure harmonic distortion caused by electronic loads
Improve reliability by capturing voltage dips and swells from load switching
Easily confirm instrument setup with color display of waveforms and trends
Measure all three phases and neutral with included 4 flexible current probes
View... |
Energy Assessment Kits
|
|
|
Fluke 700P02 Differential Pressure Module
|
|
Display pressure readings in any of 10 different pressure units you specify in the calibrator setup
Rugged urethane molded case protects the module from rough handling and harsh conditions
Features internal temperature compensation from 0°C to 50°C for full-accuracy performance
Includes NIST-traceable calibration certificate
Module can be calibrated locally using the Fluke 700PCK Pressure Calibration Kit, a PC, and a precision pressure source
One year warranty
|
Pressure
|
|
|
Fluke 87V Digital Multimeter and 87V/E2 Industrial Electrician Combo Kit
|
|
Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87-5, 87-5/E2 Kit)
True-rms ac voltage and current for accurate measurements on non linear signals (87-5, 87-5/E2 Kit)
Built in thermometer (87-5, 87-5/E2 Kit)
Measure up to 1000 V AC and DC
Measure up to 10 A (20 A for 30 seconds)
10,000 uF capacitance range
Frequency to 200 kHz and % duty cycle
Peak capture to record transients as fast as 250 μs... |
Fuses
|
|
|
Fluke 1625 GEO Earth Ground Testers - Advanced
|
|
3 - and 4-pole earth ground measurement
4-Pole soil resistivity testing
2-pole resistance measurement AC
2- and 4-pole resistance measurement DC
Selective testing, no disconnection of ground conductor (1 clamp)
Stakeless testing, quick ground loop testing (2 clamps)
Earth impedance measurement at 55 Hz
Automatic frequency control (AFC) (94, 105, 111, 128 Hz)
Measuring voltage switchable 20/48V
Programmable limits, settings
Continuity with buzzer
For the Basic model See Fluke 1623
|
Ground Testers
|
|
|
Fluke FlukeView® Forms Documenting Software-2
|
|
FlukeView Forms supports the following meters:
Fluke 1550B MegOhmMeter
Fluke 1653 / 1653B Electrical Installation Tester
Fluke 180 series
Fluke 287 and 289
Fluke 45 Fluke 53-II and 54-II
Fluke 568 IR Thermometer
Fluke 789 ProcessMeter
Fluke 8808A
Fluke 8845A/8846A
Fluke 89-IV and 87-IV
Fluke 975 AirMeter Test Tool
Fluke 983 Particle Counter
|
Software
|
|
|
Fluke 80PT-EXT Extension Wire Kit
|
|
Extending and repairing T-type thermocouple wires
Kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors
Maximum continuous exposure temperature: 260ºC
80PT-EXT is compatible with T-type thermometers
One year warranty
|
Specialty Accessories
|
|
|
Fluke 59 MAX -30 to 350°C Infrared Thermometer
|
|
Precise laser technology makes more accurate and repeatable measurements
Large, easy-to-read backlit LCD display for easy viewing
Small and lightweight design easily fits into your tool box
IP40 rated for extra protection
Displays the minimum, maximum or average temperature, or the difference between two measurements
Hi and Lo alarms for rapid display of measurements outside the limits
Powered by one (1) AA battery
One year warranty
|
Infrared Thermometers
|
|