|
Sew TEL-1-1 110V
|
|
FEATURES
● The TEL1 is the Basic Test Equipment an Electrician cannot do without. TEL1 is a Dual Function Test Instrument utilized to Verify Electrical Wiring Connections and the Functioning of Earth Leakage / Residual Current Detectors devices by forcing the ELCB/RCD to trip.
SPECIFICATIONS
Nominal Voltage System
110V-220V-230V-240Vac... |
General ELCB Testers
|
|
|
Tenmars ST-105
|
|
Model No.: : ST-105
Product Description
- Statistic analysis. - 24HR measurement. - Integral measurement. - Real time analyzer in 1/1 and 1/3 octave band. - Simultaneously measures A, C, Z and F, S, Impulse. - Measurement function: Lxyp, (Lxyi), Lxeq,1s, Lxeq, T, LAE, E,Cpeak+, Cpeak- , LAFmax, LAFmin, LAFeqT, LASeqT, LAIeqT, Laeq(20Hz~200Hz). - USB Datalogger with 128 records capacity. - Real time clock with calendar. - Sampling Frequency: 20.8us(48KHz). - Wide Frequency range: 10Hz~20KHz.... |
Class 1 Integrating Sound Analyzer Meter
|
|
|
Sew 1151 IN
|
|
FEATURES
● Microprocessor-controlled.● Automatic voltmeter AC/DC at Start/Reset.● Auto range● Auto off.● Battery test.● Battery test at Switch ON/Reset.● Safety voltmeter before each test.● Auto discharge on all test and all ranges.● Leads Auto-null key.● Test Auto-stop.● Smart hold & stop on voltmeter ac/dc.● Ener-Save feature to extend battery life.● Continuity short circuit current > 220mA.● Continuity open circuit voltage of 5Vdc.● Nominal... |
Insulation & Multifunction Testers (LCD Display)
|
|
|
DKK-TOA HDM-135A(2-wire)/HDM-136A(4-wire)
|
|
Industrial pH Transmitter HDM-135A(2-wire)/HDM-136A(4-wire)
Easy-to-use pH analyzer for field installation in a compact and rigid aluminum enclosure
Easier calibration done with standard solution
Auto determination of electrode deterioration
Alterable output range
Automated self-diagnosis of fault (burn-out output)
Meas. range
-1 - 14
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
Fluke Networks NetTool Series II Inline Network Tester
|
|
NetProve diagnostics – isolate device and application connectivity issues in seconds
Inline Gigabit vision - quickly troubleshoot network problems with powerful inline vision into 10/100/Gig traffic between switches, PCs, IP phones and other devices
NetSecure monitoring and authentication - identify spyware, malware, and viruses with port monitoring; troubleshoot authentication issues with 802.1x log
VoIP troubleshooting - connect inline for visibility into VoIP calls to quickly diagnose... |
Network Analyzers and Testers
|
|
|
Sew 6200 IN (Ranges: 2.5kV, 5kV)
|
|
FEATURES
● Microprocessor-controlled.● High quality Taut Band movement.● Two insulation test voltages.● Insulation resistance, auto ranging on all ranges.● Low Battery LED indication.● Beeper warning of external voltage.● Fully protected : crow bar.● Housed in carry case.
SPECIFICATIONS
Test voltage (DC V)
2500V
5000V
Measuring ranges
0-100GΩ
0-200GΩ
... |
Analogue (1kV up) H.V. Insulation Testers
|
|
|
Sew PC7k, PC11k, PC22k, PC33k, PC44k
|
|
● No user’s assembled parts.● Dual color-coded scale (%, Vac).● Neon indicator when >1200Vac.● Lightweight, robust & compact.● Carry case included.● Compare between phases.● Measure and test phase to earth.● High quality fiberglass wound rod.● Self powered operation. No battery required.● DC version available.● Measure phase to phase.● Hi immunity to interference fields.● Suitable for indoor and outdoor use.● Current is limited to ±1 milli-ampere.●... |
H.V. Multifuntion Phasing Sticks
|
|
|
BW Gas Alert Clip Extreme 24 Month Gas Detectors
|
|
The BW GasAlertClipExtreme is portable single gas detector designed for users with fixed-duration projects or those who need a go/no-go monitor that's lightweight, compact and easy-to-use. The GA24XT is entirely maintenance free for 24 months
GasAlertClip Extreme - Waterproof 2-Year Disposable Gas Detector with Event Logging.
Simply press the START/TEST button and the GasAlertClip Extreme is ready to use, providing two years of continuous, maintenance-free operation from the day of... |
Single gas detectors
|
|
|
Sew 2734 ER
|
|
● Microprocesser-controlled with advanced safety features.● 4-wire testing only.● Automatic C spike check.● Auto power-off.● Auto data hold.● Large LCD (2000 counts).● Protective terminal cover.
SPECIFICATIONS
Measuring ranges
Earth Resistance 0-20Ω / 0-200Ω / 0-2000Ω Earth Voltage 0-200V AC
Accuracy
Earth Resistance ±2%rdg±3dgt Earth... |
4 Wire Earth Resistance Testers
|
|
|
Fluke 90i-610s 1A to 600A AC/DC Current Probe
|
|
Current Range: 1 to 600 A DC or AC Peak
Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A)
Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A
Frequency Range: 40 Hz to 400 Hz
Working Voltage: 600 V AC rms
Maximum Conductor Diameter: 34 mm (1.34 inch)
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
|
Automotive Accessories
|
|
|
testo 175 T1 (0572 1751) 1-Channel Temp Logger with Internal NTC Sensor
|
|
Features
One button operation - Click and “GO” button instantly starts logging and recording.
TWO standard interfaces - Mini USB and SD card for easiest direct communication with your PC - no added interface required.
Large display w/ one button backlight - For easily viewing data in poorly lit areas.
Longer battery life - Designed to conserve energy for data recording without interruption. Up to 3 years battery life. Standard battery (AA) replaceable by user.
Larger memory - Collect... |
Datalogger
|
|
|
Fluke Networks TS42DLX and TS44Pro Telephone Test Sets
|
|
Superior high-impedance monitoring
Data indication/warning
Low & high voltage indication/warning
Low current (mA) indication/warning Passive monitor
2-Way hands-free speakerphone
Low battery warning
Mute indication
Polarity indication
Tone & pulse dialing
(Optional) 1-Way amplified speakerphone mode
Amplified speaker
Last number redial
Over voltage protection
Over current protection
Mute
PBX pause button
Audible ringer
Speed dialing
Volume control... |
Telephone Test Sets / Butt Sets
|
|
|
Fluke CIQ-100 CableIQ Qualification Tester
|
|
Qualifies - Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
Troubleshoots - shows why existing cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters)
Discovers - detects what's at the end of any cable and displays device configuration (speed/duplex/pairing)
Identifies unused switch ports that can be reallocated
Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap... |
Copper Cable Test Solutions
|
|
|
DKK-TOA HM-30R
|
|
Large color graphic LCD display
0.01/0.001 pH display switchable
High-performance with the Strong&Float (internal solution concentration checker) pH electrode
USB (Host) and LAN equipped
Multiple sample measuring capability (turntable connection)
Meas. range
pH 0.000 - 14.000 0.0 - ±2000.0mV (ORP electrodes sold separately) 0 - 100.0℃ |
pH meters
|
|
|
Sew 2713 PU
|
|
Designed to proof: -Phasing sticks. -High voltage detectors (contact type only, not to be used with non contact proximity detectors.) -High voltage and voltage testers.● Battery operated.● Led indicates when power is “ON”.● Small and hand-held.● Quick connection with normal 4mm test leads. |
H.V. Proving Unit (DCV)
|
|
|
BW Sensepoint XCD
|
|
The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, nonintrusive operation and reduces routine maintenance time and costs. Sensepoint XCD ensures easy installation and the fastest routine operation by removing the need for hot work permits in hazardous... |
Fix type gas detector
|
|
|
DKK-TOA MBM-100A
|
|
Panel Type Electromagnetic Conductivity Analyzer MBM-100A
Compact DIN 96 size
Accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali)
2-point contact signal, 4 - 20mA output (RS-232 optional)
Meas. range
Minimum : 0 - 2 mS/cm Maximum: 0 - 2000 mS/cm
|
Panel Type Electromagnetic Conductivity/Concentration Analyzer
|
|
|
DKK-TOA OC-711 / OC-950
|
|
Immersion/Drop-In Type DO Holder OC-711 / OC-950
Lightweight PVC holder; length of immersion type holder: 0.3 - 3.5 m, length of stainless steel protection pipe for drop-in type holder: 2 - 6 m
Electrode: polarograph type 7533L (for standard use) or 7536L (for human waste)
|
Immersion/Drop-in Type DO Holder/Detector with Water Jet Cleaner
|
|
|
Sew 4235 ER
|
|
● Microprocessor-controlled.● Earth resistivity (ρ) test.● Earth testing at 20Ω, 200Ω, 2kΩ.● Earth voltage measuring : 0-300V AC.● Automatic C spike check.● Automatic P spike check.● 2-Wire test, 3-Wire test, 4-Wire test.● LCM display.● Auto ranging.● Auto power OFF.● Data hold.● 200 measurement results can be saved in the memory and recalled on the display.● Interval between auxiliary earth spikes is 1.0~50.0m.
... |
4 Wire Earth Resistance & Resistivity Testers
|
|
|
Sew ST-2000 A
|
|
Principle : Moving ● Accuracy : ± 0.5% of F.S. ● Scale Length : Approx. 135mm(5-3/8”) ● Weight : Approx. 1.7kg ● Dimension :196(L) x 170(W) x 87(D)mm ● Case Material : Bakelite with glass window |
Portable Instrument
|
|