|
TLH-5903
|
|
3.6V Lithium Battery. |
Data Logger Batteries
|
|
|
ThermoVault1000
|
|
The ThermoVault1000 is a stainless steel thermal barrier for use with the Temp1000P or Temp1000FP data loggers. This durable enclosure is submersible and can withstand temperatures of up to 350°C (230°C with O-Ring). This device is easy to install. Simply open the enclosure, insert the data logger, thread the probe through the end cap and latch it back onto the barrier body. The ThermoVault1000 is built for use in applications that require extreme temperature monitoring, such as with... |
Enclosures
|
|
|
ThermoVault140
|
|
The ThermoVault140 is an extreme high temperature data logging system, for use with a HiTemp140 data logger and stainless steel thermal barrier enclosure. This durable system can withstand temperatures up to 250°C when completely submerged and 350°C in dry heat applications (O-ring removed).
The ThermoVault140 is built for use in harsh applications that require extreme temperature monitoring, such as with furnace profiling, geothermal down-hole recording, and oven data logging.
The... |
Enclosures
|
|
|
TC-KU-12062002 Probe (5.75" sheath)
|
|
Type K Thermocouple assembly. 60” PFA wire with a 1/8” diameter. 5.75” stainless steel sheath. For CTL2000. |
Probes
|
|
|
TC-KU-12062003 Probe (3" sheath)
|
|
Type K Thermocouple assembly. 60” PFA wire with a 1/8” diameter. 3” stainless steel sheath. For CTL2000. |
Probes
|
|
|
Thermocouple Probe Assembly for Glycol Bottle
|
|
Thermocouple Probe Assembly for 30ml, 60ml and 250ml Glycol Bottles. |
Probes
|
|
|
TJ36-CASS-18U-6-SMPW-M
|
|
Type K Thermocouple with 6" x 1/8" dia. Stainless Steel Sheath and 3’ of lead wire. Replacement Thermocouple for ETR101A. |
Probes
|
|
|
TCTemp1000-O-Ring
|
|
One set of replacement o-rings for TCTemp1000. |
O-Rings
|
|
|
TEMP-1000-O-RING
|
|
One set of replacement o-rings for Temp1000, Temp1000SS (not available for Intrinsically Safe products) |
O-Rings
|
|
|
Temp1000P-O-Ring
|
|
One set of replacement o-rings for Temp1000P |
O-Rings
|
|
|
TES-1500 Capacitance Meter
|
|
0.5% Accuracy.
Overload Fuse protection.
Test Clips/Direct insert jack for easy measurement.
|
Multimeter
|
|
|
TES-2620 True RMS Multimeter
|
|
3-3/4 Digital LCD with bar-graph
Water-Proof ABS housing
Auto-power off
Ohms, Diode Audible continuity, Capacitance input Overload protection to 600 Vrms
|
Multimeter
|
|
|
TES-2700/2712 LCR Multimeter
|
|
MODEL TES-2700
Autoranging and Auto-power-off
3200 count LCD with analog bar-graph
Data-hold mode available at ohms.
Overload protection up to 600 Vrms
MODEL TES-2712
3 1/2 LCD
Data-hold and peak-hold function available
Inductance, Capacitance & ohm measurement
|
Multimeter
|
|
|
TES-2732A Datalogger Multimeter (RS-232)
|
|
DMM talks with P.C. via RS-232 interface
Data Logger function
Direct input of V, A, Ohm, Hz, Cx & o C/ o F without any further singnal modification
|
Multimeter
|
|
|
TES-3010/3012 Prof. Clamp Meter
|
|
ACA: 20A, 200A, 600A
Continuity Buzzer
Unit & Sign Display
|
DC/AC Current Clamp Meter
|
|
|
TES-3040 AC Clamp Meter
|
|
EN61010-1 600V INSTALLATION VAT III POLLUTION DEGREE 2
3-3/4 Digital LCD with bar-graph
Auto-power off with Data Hold and MAX/MIN mode
Zero Adjustment/Relative Reading
|
DC/AC Current Clamp Meter
|
|
|
TES-3050 TRMS AC/DC Clamp Meter
|
|
EN61010-1 600V INSTALLATION VAT III POLLUTION DEGREE 2
3-3/4 Digital LCD with bar-graph
Auto-ranging off / Data Hold / Peak Hold / MAX/MIN mode
Zero Adjustment/Relative Reading
|
DC/AC Current Clamp Meter
|
|
|
TES-3074 AC 1000A Clamp Meter
|
|
Capacitance Measurement (400μF).
MAX / MIN / Data Hold.
Phase Rotation Indicator.
Pos Peak Hold & Neg Peak Hold.
1000A AC & 600V AC.
|
DC/AC Current Clamp Meter
|
|
|
TES-3082 True RMS Clamp Meter
|
|
EN61010-1 600V INSTALLATION VAT III POLLUTION DEGREE2
Auto-Ranging Frequency measurements
Auto ZERO mode
Data Hold mode
PEAK Hold mode
True RMS Reading
|
DC/AC Current Clamp Meter
|
|
|
TES-3091R DC/AC CLAMP METER
|
|
3-1/2 Digital LCD, 2000 count.
Pocket size.
MAX hold / Data hold function.
|
DC/AC Current Clamp Meter
|
|