|
Kyoritsu 8126
|
|
Load current clamp sensor
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
*
When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors.
|
Power Meter
|
|
|
Kyoritsu 8125
|
|
Load current clamp sensor
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
*
When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors.
|
Power Meter
|
|
|
Kyoritsu 8124
|
|
Load current clamp sensor
Applicable model 5010/5020, 6300, 6305, 6310, 6315 |
Power Meter
|
|
|
Kyoritsu 8115
|
|
Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test.
•
Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.
|
Sensors, Multi-Trans, Clamp adaptors
|
|
|
Kyoritsu 8006
|
|
AC CLAMP ADAPTOR
•
Model 8006 is designed to measure AC current up to1500A.
•
It can accommodate up to 60mm-dia conductor or 50mm by 75mm bus-bar.
|
Sensors, Multi-Trans, Clamp adaptors
|
|
|
Kyoritsu 8112
|
|
AC CLAMP ADAPTOR
•
Model 8112 clamp adaptor is designed to be an AC current/voltage conversion probe capable of measuring AC current from 0.1mA to 120A in conjunction with digital multimeters. Simple to operate, the unit has range switch position at 200mA,2A and 20A. It also features safety design throughout with no exposed metal parts.
|
Sensors, Multi-Trans, Clamp adaptors
|
|
|
Kyoritsu 8112BNC
|
|
AC CLAMP ADAPTOR Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord has a BNC connector which enables direct observation of current waveform on oscilloscope. Refer to a diagram shown at left for application. Specifications are same as those for Model 8112. |
Sensors, Multi-Trans, Clamp adaptors
|
|
|
Kyoritsu 8113
|
|
AC/DC CLAMP ADAPTOR
•
Model 8113 is a clamp-on AC/DC current/voltage converter that permits AC/DC current measurements from 1mA to 200A in conjunction with a voltmeter having 0.1mV resolution.
|
Sensors, Multi-Trans, Clamp adaptors
|
|
|
Kyoritsu 8008
|
|
Multi-Trans
How to Use Clamp your instrument around the pick-up coil of the multi-tran. Then, clamp the transformer jaws of the multi-tran on the conductor, as shown below. Multiply the reading of your clamp meter by 10 to obtain the current value measured. |
Sensors, Multi-Trans, Clamp adaptors
|
|
|
Kyoritsu Discontinued products
|
|
MODEL
Descriptions
Remark
Alternative
1007
Digital Multimeter
1009
1008
Digital Multimeter
1009
1010
Solar Pocket Tester
Solar battery
No
1015
Digital Multimeter
1018
1017
Digital Multimeter
1018
1020
Digital Multimeter
Automatic mode switchingbetween AC and DC voltage measurements.
No
1103
Analogue Multimeter
1110
1104
Analogue Multimeter
with 1000V range and10A... |
Discontinued products
|
|
|
Kyoritsu 2012R
|
|
Kyoritsu 2012R
Innovative Multhimeters with current measurements up to 120A AC/DC
•
Unique Open Jaw technology for AC/DC current measurements
•
Very compact and as reliable as a tradictional full size multimeter
|
Digital Multimeter with AC/DC Clamp Sensor
|
|
|
Kyoritsu KEW MATE 2000
|
|
Capable of measuring AC and DC currents up to 60A with OPEN CLAMP SENSOR.
•
3400 counts with bargraph display.
•
Pocket size and heavy duty design.
|
Digital Multimeter with AC/DC Clamp Sensor
|
|
|
Kyoritsu KEW MATE 2001
|
|
Capable of measuring AC and DC currents up to 100A with OPEN CLAMP SENSOR.
•
3400 counts with bargraph display.
•
Pocket size and heavy duty design.
|
Digital Multimeter with AC/DC Clamp Sensor
|
|
|
Kyoritsu 1051/1052
|
|
High Accuracy, High Performance and Reliable Measurements
•
0.09% basic DC accuracy
•
Large display with 6,000 counts
•
True-RMS Measurements
•
True-RMS or MEAN value detection mode can be selected *
•
Low-pass filter for motor drive measurements
•
User calibration function
Safety design for industrial use
•
Complies with IEC 61010-1 CAT.IV 600V,CAT.III 1000V
•
Terminal shutter to prevent incorrect test leads'... |
Digital Multimeters
|
|
|
Kyoritsu 1061/1062
|
|
High Accuracy, High Performance and Reliable Measurements
•
0.02% basic DC accuracy
•
Large display with 50,000 counts
•
Dual display for double indication for AC and DC, V and Hz, etc.
•
True-RMS Measurements AC and AC+DC
•
Wide AC Frequency bandwidth from 10Hz to 100kHz *
•
True-RMS or MEAN value detection mode can be selected *
•
Fast Peak Hold response time of 250µs
•
Low-pass filter for motor drive measurements... |
Digital Multimeters
|
|
|
Kyoritsu 1012
|
|
True RMS can measure and indicate distorted waveforms
•
6040 counts with Bar Graph display
•
MIN/MAX function enables to record min & max value
•
REL(relative value) function to indicate the measurement variation
|
Digital Multimeters
|
|
|
Kyoritsu 1011
|
|
Temperature measurement, selectable for ºC and ºF
•
6040 counts with Bar Graph display
•
MIN/MAX function enables to record min & max value
•
REL(relative value) function to indicate the measurement variation
|
Digital Multimeters
|
|
|
Kyoritsu 1030
|
|
Compact in Size, Light in Weight and Simple in Use.
•
Double moulding provides comfortable and good feeling in hand.
•
Penlight illuminates brightly the point to be measured, even in dark place.
•
Backlight LCD is highly visible, even in darkness.
•
Unique wrapping mechanism for test lead in the rear side compartment.
•
Unique protection mechanism for the test prod for safety.
•
All ranges including Ohm range are protected against overload... |
Digital Multimeters
|
|
|
Kyoritsu 1018 (Soft case type) / 1018H (Hard case type)
|
|
Display : 4000 counts.
•
Auto range.
•
Diode test feature.
•
Capacitance test feature.
•
Continuity test.
|
Digital Multimeters
|
|
|
Kyoritsu 1009
|
|
Display : 4000 counts.
•
Auto range and manual range selector provided.(with range hold feature)
•
Resistance range provides audible continuity test.
•
Automatically turns power off in about 30 minutes to conserve battery life.
•
Direct current measurement up to 10A AC and DC.
•
With Holster.
|
Digital Multimeters
|
|