|
DKK-TOA FPA
|
|
Designed for oil refinery
Batch continuous analysis of flash point of petroleum products such as light gas oil, kerosene and gasoline
Best suited for management of plant and product control
Explosion-proof TIIS d2G4 certified
Meas. range
0 - 100 degrees C
|
Flash Point Analyzer
|
|
|
DKK-TOA WBM-100
|
|
Compact DIN 96 size
Temperature compensation computed by a microcomputer
Cell constant value adjustable depends on customers' need
Water temperature displayable
Power supply: AC90 - 264V, 50/60Hz
Meas. range
Minimum : 0 - 0.2 μS/cm Maximum : 0 - 20 mS/cm
|
Panel Type Conductivity Analyzer
|
|
|
DKK-TOA GLN-314E
|
|
Nitrogen Oxides Analyzer GLN-314E
US EPA Approval
Chemical luminescence method
Alternating measurement of nitric monoxide (NO) and nitrogen oxides (NOx) ensures stable and continuous measurement of minute amounts of nitrogen oxides in the air
Easy-to-use touch panel
Meas. range
0 - 0.1, 0 - 0.2, 0 - 0.5, 0 - 1.0, 0 - 2.0 ppm
|
Nitrogen Oxides Analyzer
|
|
|
DKK-TOA BMR-24
|
|
Compact and lightweight model in accordance with DIN standard
DC 24V power supply designed for 4-point alarm and 2-wire transmitters
Often used as a receiver of 2-wire or 4-wire transmitter (such as pH/ORP meters, conductivity analyzers and DO meters)
Meas. range
pH meter: pH; 0 - 14 70divisions (to be specified otherwise)
|
Bar Graph Meter Relay
|
|
|
DKK-TOA CM-30R
|
|
JP16 (The Japanese Pharmacopoeia 16th edition) conformity and stable electric conductivity measurement
Built-in pure water temperature compensation
USB (Host) and LAN equipped as standard specification
Compliant with USP<645> requirements
Meas. range
0 - 200.0 S/m 0 - 20.00 MΩ・m Chloride 0 - 4.00% Concentration 0 - 200% 0 - 100.0 degrees C |
Conductivity Meter
|
|
|
DKK-TOA ME-6/7/11T series (high sensitivity type)
|
|
Toroidal type teflon detector with excellent corrosion/heat/pressure resistance
Accurate results for high conductivity corrosive solutions (such as strong acid/alkali)
Types of detectors available: flow-through, immersion, pipeline insertion, etc.
Meas. range
Minimum: 0 - 2 mS/cm Maximum: 0 - 2000 mS/cm
|
Electromagnetic Conductivity Detector
|
|
|
DKK-TOA AA-1(for Standard) / AA-2 (for Ultrapure Water)
|
|
Single-function (no indication) conductivity analyzer for field installation
Easy installation for the one-unit amplifier and detector
Output: 4 - 20mADC
Power supply: 100VAC
Meas. range
AA-1: 0 - 2 μS/cm to 0 - 10000 μS/cm AA-2: 0 - 0.2/0.5/1.0 μS/cm
|
Conductivity Detectors with Amplifier
|
|
|
DKK-TOA GFS-312E
|
|
Sulfur Dioxide Analyzer GFS-312E
US EPA Approval
Continuous measurement of SO2 by using Ultraviolet fluorescence method
Improved optical system reduces the impact from interfering substances
Easy-to-use touch panel
Meas. range
0 - 0.05, 0 - 0.1, 0 - 0.2, 0 - 0.5, 0 - 1.0 ppm
|
Sulfur Dioxide Analyzer
|
|
|
DKK- TOA CLF-1610
|
|
Measures free residual chlorine of clean water continuously with the reagentless polarographic method
RS-485 equipped as standard specification; compatible with Modbus communication system
Freely mountable on walls, racks, etc. for the compact lightweight design
Meas. range
0 - 1/2, 0 - 1/3, 0 - 2/3 mg/L (ppm) (2-range)
|
Reagentless Free Chlorine Analyzer
|
|
|
DKK-TOA ODM-100A (2-wire) / ODM-110A (4-wire)
|
|
Industrial Low-Concentration DO Transmitter ODM-100A (2-wire) / ODM-110A (4-wire)
Easy-to-use low-concentration DO analyzer for field installation in a compact and rigid aluminum case
Simplified calibration procedure; auto detection of electrode deterioration
Alterable output range
Automated self-diagnosis of fault (burn-out output)
Meas. range
Minimum: 0 - 20 μg/L Maximum: 0 - 2000 μg/L
|
Transmitter for Industrial Low-Concentration DO Analyzer
|
|
|
DKK-TOA COD-203A
|
|
Automated COD Analyzer COD-203A
Measures COD of river water, lake water and effluent in accordance with JIS K 0806 instruction "Automatic chemical oxygen demand meter"
Acid process and alkaline process available
Capability of two flow paths measurement
Meas. range
0 - 20 mg/L to 0 - 2000 mg/L
|
Automatic COD Analyzer
|
|
|
DKK-TOA GSS‐304B(KCl Replenish-Free) / GSS‐314B(KCl Refillable)
|
|
Easy-to-replace electrode tip and reference electrode junction tip
Alkali-resistant glass tips and hydrofluoric-acid-resistant glass tips available
KCl non-refillable type for wastewater treatment; KCl refillable type for processes
Selection of electrode holder: immersion type, drop-in type and flow-through type
Meas. range
pH: 0 - 14
|
Exchangeable Tip pH Electrode
|
|
|
DKK-TOA EMNA-10
|
|
Continuous measurement of Na+ ion concentration of boiler water at ppb level
Auto self-detection of degradation of ion-exchange system
Meas. range
0 - 0.1/1 - 100/10 - 1000 ppb (manual swtiching)
|
Sodium Ion Monitor
|
|
|
DKK-TOA IM-32P
|
|
2-channel type, simultaneous measurement and display of pH/ions
Power-saving design; rechargeable battery adaptable
Waterproof design (IP67: 1m depth, up to 30mins)
Data storage up to 1000 points
PC and external printer connectable
Measurement items
pH, ORP, ions, temperature (ORP and ion electrodes sold separately) |
Handheld Ion/pH Meter
|
|
|
DKK-TOA PPA
|
|
Designed for oil refinery
Continuous measurement of pour point which is used as indication of light oil and intermediate fraction of fuel oil A
Best suited for management of plant and product control
Explosion-proof TIIS d2G4 certified
Meas. range
-30 - +20 degrees C
|
Pour Point Analyzer
|
|
|
DKK-TOA MM-60R
|
|
2-Channel model with automatic sensor identification ● Allows for connections of pH/ORP/ion/conductivity/dissolved O2 sensors to either channel ● 0.01/0.001 pH display switchable ● Large color graphic LCD display ● JP16 (The Japanese Pharmacopoeia 16th edition) conformity and stable electric conductivity measurement ● USB (Host) and LAN equipped as standard specification ● External printer connectable ● Multiple samples measurement (turntable connection)... |
Multi-Function Water Quality Meter
|
|
|
DKK-TOA AUT-701
|
|
Dual system allows for 2-channel simultaneous titration
Strong&Float high performance electrodes
USB(Host) and LAN equipped as standard specification
Validation supporting function
Turntable, auto-sampling system and etc. connectable
|
Automatic Titrator
|
|
|
DKK- TOA CLD-7M
|
|
Measures chloride demand of water and estimates chlorine injection level; best suited for feed forward control
Meas. range
From 0 - 5 mg/L to 10 mg/L (ppm) From 0 - 10 mg/L to 20 mg/L (ppm)
|
Chloride Demand Analyzer
|
|
|
DKK-TOA CFPP
|
|
Designed for oil refinery
Continuous measurement of plugging pour point which is used as indication of light oil and intermediate fraction of fuel oil A
Best suited for management of plant and product control
Explosion-proof TIIS d2G4 certified
Meas. range
-30 - +20 degrees C
|
Cold Filter Plugging Point Analyzer
|
|
|
DKK-TOA GUX-313E
|
|
Ozone Analyzer GUX-313E
US EPA Approval
Continuous measurement of O3 concentration by using UV photometry method
Easy-to-use touch panel
Meas. range
0 - 0.1, 0 - 0.2, 0 - 0.5, 0 - 1.0 ppm
|
Ozone Analyzer
|
|