|
Kyoritsu 5001
|
|
THE LEAKAGE CURRENT IS RECORDED BY 3CH INPUT60,000 DATA IS RECORDED
60,000 data is recorded when 1ch is used and when three all channels are used, 20,000 data is recorded for each channel
Continuous measurement time
About 40 days
Data where it doesn’t disappear even if battery is consumed
Data doesn’t disappear by using the nonvolatile memory when the battery is consumed and the battery is exchanged.... |
Logger
|
|
|
Kyoritsu 8309
|
|
Floating voltage can be measured
*Floating voltage:phase to phase voltage not grounded
*KEW 5020-01:KEW 5020 logger with KEW 8309 (1 pce.)
For use with following model
5020
|
Voltage Sensor
|
|
|
Kyoritsu 8130
|
|
Can measure AC current up to 1000A
•
Flexible and light weight by the air core coil used at the sensor part
•
Designed to meet the international safety standardIEC 61010-1 CAT IV 300V, CAT III 600V
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
|
Flexible Clamp Sensor
|
|
|
Kyoritsu 8129
|
|
Flexible for various test fields
•
Can measure AC current up to 3000A
•
Flexible and light weight by the air core coil used at the sensor part
•
Measurable conductor size:max Φ150mm
•
Designed to meet the international safety standardIEC 61010-1 CAT.III 600V
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
|
Flexible Clamp Sensor
|
|
|
Kyoritsu 8121
|
|
Applicable model 5010/5020
Conductor size
Φ24
Rated current
AC 100A
Output voltage
AC 500mV/100A (AC 5mV/A)
Accuracy
|±2.0%rdg±0.3mV (50/60Hz)|±3.0%rdg±0.5mV (40Hz~1kHz)
Withstand voltage
AC 3540V for 5 seconds
Cable length
Approx. 2m
Output connector
MINI DIN 6pin
Operating temperature ranges
0~40ºC, less than 85% RH (without condensation)
Output impedance
Approx. 9.5Ω
Applicable standards
IEC 61010-1:2001,IEC... |
Load current clamp sensors
|
|
|
Kyoritsu 8122
|
|
Applicable model 5010/5020
Conductor size
Φ40
Rated current
AC 500A
Output voltage
AC 500mV/500A (AC 1mV/A)
Accuracy
|±2.0%rdg±0.3mV (50/60Hz)|±3.0%rdg±0.5mV (40Hz~1kHz)
Withstand voltage
AC 5350V for 5 seconds
Cable length
Approx. 2m
Output connector
MINI DIN 6pin
Operating temperature ranges
0~40ºC, less than 85% RH (without condensation)
Output impedance
Approx. 1.9Ω
Applicable standards
IEC 61010-1:2001,IEC... |
Load current clamp sensors
|
|
|
Kyoritsu 8123
|
|
Applicable model 5010/5020
Conductor size
Φ55
Rated current
AC 1000A
Output voltage
AC 500mV/1000A (AC 0.5mV/A)
Accuracy
|±2.0%rdg±0.3mV (50/60Hz)|±3.0%rdg±0.5mV (40Hz~1kHz)
Withstand voltage
AC 5350V for 5 seconds
Cable length
Approx. 2m
Output connector
MINI DIN 6pin
Operating temperature ranges
0~40ºC, less than 85% RH (without condensation)
Output impedance
Approx. 1.5Ω
Applicable standards
IEC 61010-1:2001,IEC... |
Load current clamp sensors
|
|
|
Kyoritsu 8146
|
|
Applicable model
5010/5020, 6310, 6315
* Cannot be used for power measurement.
Conductor size
Φ24
Rated current
AC 30A
Output voltage
AC 1500mV/30A (AC 50mV/A)
Accuracy
0~15A|±1.0%rdg±0.1mV (50/60Hz)|±2.0%rdg±0.2mV (40Hz~1kHz)
15~30A|±5.0%rdg (50/60Hz)|±10.0%rdg (45Hz~1kHz)
Withstand voltage
AC 3540V for 5 seconds
Cable length
Approx. 2m
Output connector
MINI DIN 6pin
Operating temperature ranges
0~50ºC, less than... |
Leakage & Load current clamp sensors
|
|
|
Kyoritsu 8147
|
|
Applicable model
5010/5020, 6310, 6315
* Cannot be used for power measurement.
|
Leakage & Load current clamp sensors
|
|
|
Kyoritsu 8148
|
|
Applicable model
5010/5020, 6310, 6315
* Cannot be used for power measurement.
|
Leakage & Load current clamp sensors
|
|
|
Kyoritsu 8141
|
|
Applicable model
5000/5001, 5010/5020, 6310
* Cannot be used for power measurement.
|
Leakage current clamp sensors
|
|
|
Kyoritsu 8142
|
|
Applicable model
5000/5001, 5010/5020, 6310
* Cannot be used for power measurement.
|
Leakage current clamp sensors
|
|
|
Kyoritsu 8143
|
|
Applicable model
5000/5001, 5010/5020, 6310
* Cannot be used for power measurement.
|
Leakage current clamp sensors
|
|
|
Kyoritsu 3321A
|
|
AC Voltmeter with linear, easy-to-read scales.
•
Auto discharge function; any charge stored in the circuit under test will be automatically discharged after testing.
•
Designed to meet IEC/EN 61010-1 CAT.III 600V, CAT.II 1000V
•
Color-coded scales for easy reading.
•
Back light function to facilitate working at dimly illuminated locations.
•
Test lead set with remote control switch.
•
Shoulder strap for hands free.
|
Analogue Insulation Tester
|
|
|
Kyoritsu 3161A
|
|
Miniature lightweight insulation tester. It weighs only 340g(battery included), but carries full measurement functions.
•
Automatic discharge of circuit capacitance.
•
Test leads with remote control switch.
•
New robust housing case.
•
Back light function.
•
Neck strap for both hand?s operation.
|
Analogue Insulation Tester
|
|
|
Kyoritsu 3165/3166
|
|
500V/1000MΩ(Model 3165)
•
1000V/2000MΩ (Model 3166)
•
Expanded megohm scale for easy reading.
•
New robust housing case to prevent damage.
•
AC voltmeter scale for easy reading.
•
Neck strap for both hand’s operation.
|
Analogue Insulation Tester
|
|
|
Kyoritsu 3131A
|
|
The Model 3131A offers unmatched performance, and feature including test lead resistance zero adjustment for time-saving continuous operation, a clear ease to read illuminated scale, and a live circuit warning.
•
Test insulation up to 100MΩ at 250V, 200MΩ at 500V, 400MΩ at 1000V and continuity up to 20Ω.
•
LIVE circuit warning lamp plus audible warning.
•
Automatic discharge of circuit capacitance when TEST button is released.
•
Fuse protected... |
Analogue Insulation / Continuity Tester
|
|
|
Kyoritsu 3132A
|
|
Dust and drip proof construction. (designed to IEC 60529 IP54)
•
Designed to meet IEC 61010-1 and IEC 61557 safety standard.
•
1mA rated test current at the minimum resistance.
•
200mA measuring current on continuity testing.
•
Automatic discharge of circuit capacitance. (Any charge stored in the circuit under test will be automatically discharged after testing.)
•
Live circuit warning buzzer and neon lamp.
•
Small and lightweight.... |
Analogue Insulation / Continuity Tester
|
|
|
Kyoritsu 3021/3022/3023
|
|
3 functions in one unit, insulation test with 4 voltage ranges, continuity test, AC voltage measurement
•
200mA measuring current on continuity testing
•
Comparator function with PASS / FAIL and buzzer
•
0Ω adjustment at continuity measuring range
•
Memory function up to 99 data
•
Backlight LCD provides easy reading in dark locations
•
Safety lock system prevents an erroneous operation on 500 and 1000 Volt ranges
•
Safety standard... |
Digital Insulation / Continuity Tester
|
|
|
Kyoritsu 3007A
|
|
Bargraph to display insulation resistance.
•
Displays the value of external AC voltage along with flashing symbol.
•
Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
•
Trac-Lok mode to conserve battery life on insulation and continuity tests.
•
Live circuit warning beeper.
•
Releasing the test button automatically discharges the charges stored in the circuit under... |
Digital Insulation / Continuity Tester
|
|