|
Kyoritsu 8208Leakage demo panel
|
|
This panel demonstrates the use of Kyoritsu Leakage Clamp Meters in troubleshooting nuisance tripping of RCD's due to leakage currents. It includes an RCD with bypass facilities and 5 downstream circuits. Each circuit can simulate a fixed/variable leakage current by selecting an appropriate switch. Using a Kyoritsu Leakage Clamp the overall leakage current can be found and the source of leakage current direction can be traced by clamping the conductors in each circuit. There can also be a... |
Demonstration Panels
|
|
|
Kyoritsu 8205AMultifunction and Safety Testers demo panel
|
|
This demonstrative panel is intended to demonstrate the use Multifunction testers and specific instruments like Continuity, Insulation, Earth, Loop and RCD testers of Kyoritsu. The panel simulates an electrical installation with TT and TN distribution systems, easy selectable by a switch on the panel. The tests that can be carried out are:
•
Continuity Test of Protective and Equipotential conductors
•
Insulation Resistance Test
•
Earth Resistance Test (Volt-Ampere... |
Demonstration Panels
|
|
|
Kyoritsu 8200-04
|
|
Applicablemodel
4106
•
Cord reel
•
4reels/set
|
Clip etc.
|
|
|
Kyoritsu 8200-03
|
|
Applicablemodel
7100A
•
Cord reel
•
3reels/set
|
Clip etc.
|
|
|
Kyoritsu 8148
|
|
Applicable model
5010/5020, 6310, 6315
* Cannot be used for power measurement.
|
Leakage & Load current clamp sensors
|
|
|
Kyoritsu 8147
|
|
Applicable model
5010/5020, 6310, 6315
* Cannot be used for power measurement.
|
Leakage & Load current clamp sensors
|
|
|
Kyoritsu 8146
|
|
Applicable model
5010/5020, 6310, 6315
* Cannot be used for power measurement.
Conductor size
Φ24
Rated current
AC 30A
Output voltage
AC 1500mV/30A (AC 50mV/A)
Accuracy
0~15A|±1.0%rdg±0.1mV (50/60Hz)|±2.0%rdg±0.2mV (40Hz~1kHz)
15~30A|±5.0%rdg (50/60Hz)|±10.0%rdg (45Hz~1kHz)
Withstand voltage
AC 3540V for 5 seconds
Cable length
Approx. 2m
Output connector
MINI DIN 6pin
Operating temperature ranges
0~50ºC, less than... |
Leakage & Load current clamp sensors
|
|
|
Kyoritsu 8143
|
|
Applicable model
5000/5001, 5010/5020, 6310
* Cannot be used for power measurement.
|
Leakage current clamp sensors
|
|
|
Kyoritsu 8142
|
|
Applicable model
5000/5001, 5010/5020, 6310
* Cannot be used for power measurement.
|
Leakage current clamp sensors
|
|
|
Kyoritsu 8141
|
|
Applicable model
5000/5001, 5010/5020, 6310
* Cannot be used for power measurement.
|
Leakage current clamp sensors
|
|
|
Kyoritsu 8130
|
|
Can measure AC current up to 1000A
•
Flexible and light weight by the air core coil used at the sensor part
•
Designed to meet the international safety standardIEC 61010-1 CAT IV 300V, CAT III 600V
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
|
Flexible Clamp Sensor
|
|
|
Kyoritsu 8129
|
|
Flexible for various test fields
•
Can measure AC current up to 3000A
•
Flexible and light weight by the air core coil used at the sensor part
•
Measurable conductor size:max Φ150mm
•
Designed to meet the international safety standardIEC 61010-1 CAT.III 600V
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
|
Flexible Clamp Sensor
|
|
|
Kyoritsu 8128
|
|
Load current clamp sensor
Applicable model 5010/5020, 6300, 6305, 6310, 6315 |
Power Meter
|
|
|
Kyoritsu 8127
|
|
Load current clamp sensor
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
*
When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors.
|
Power Meter
|
|
|
Kyoritsu 8126
|
|
Load current clamp sensor
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
*
When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors.
|
Power Meter
|
|
|
Kyoritsu 8125
|
|
Load current clamp sensor
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
*
When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors.
|
Power Meter
|
|
|
Kyoritsu 8124
|
|
Load current clamp sensor
Applicable model 5010/5020, 6300, 6305, 6310, 6315 |
Power Meter
|
|
|
Kyoritsu 8123
|
|
Applicable model 5010/5020
Conductor size
Φ55
Rated current
AC 1000A
Output voltage
AC 500mV/1000A (AC 0.5mV/A)
Accuracy
|±2.0%rdg±0.3mV (50/60Hz)|±3.0%rdg±0.5mV (40Hz~1kHz)
Withstand voltage
AC 5350V for 5 seconds
Cable length
Approx. 2m
Output connector
MINI DIN 6pin
Operating temperature ranges
0~40ºC, less than 85% RH (without condensation)
Output impedance
Approx. 1.5Ω
Applicable standards
IEC 61010-1:2001,IEC... |
Load current clamp sensors
|
|
|
Kyoritsu 8122
|
|
Applicable model 5010/5020
Conductor size
Φ40
Rated current
AC 500A
Output voltage
AC 500mV/500A (AC 1mV/A)
Accuracy
|±2.0%rdg±0.3mV (50/60Hz)|±3.0%rdg±0.5mV (40Hz~1kHz)
Withstand voltage
AC 5350V for 5 seconds
Cable length
Approx. 2m
Output connector
MINI DIN 6pin
Operating temperature ranges
0~40ºC, less than 85% RH (without condensation)
Output impedance
Approx. 1.9Ω
Applicable standards
IEC 61010-1:2001,IEC... |
Load current clamp sensors
|
|
|
Kyoritsu 8121
|
|
Applicable model 5010/5020
Conductor size
Φ24
Rated current
AC 100A
Output voltage
AC 500mV/100A (AC 5mV/A)
Accuracy
|±2.0%rdg±0.3mV (50/60Hz)|±3.0%rdg±0.5mV (40Hz~1kHz)
Withstand voltage
AC 3540V for 5 seconds
Cable length
Approx. 2m
Output connector
MINI DIN 6pin
Operating temperature ranges
0~40ºC, less than 85% RH (without condensation)
Output impedance
Approx. 9.5Ω
Applicable standards
IEC 61010-1:2001,IEC... |
Load current clamp sensors
|
|