• Filter

MEMORY HiCORDER MR8847 Series High-speed 20MS/s Multi-channel Memory Recorder Provides Simultaneous Data Acquisition During Field Testing with Rugged Portability and Built-in Printer Hioki Memory HiCorders are high-speed waveform monitoring and recording devices that can simultaneously measure multiple physical phenomena such as voltage, current, temperature, vibration, weight, acceleration and rotation due to complete isolation between channels and from each channel to the ground. More than just an oscilloscope, the MR8847 Series accommodates plug-and-play input modules to meet applications such as monitoring commercial power supplies, fault analysis of electrical equipment, testing of automotive mechanisms, and general inspection of various industrial facilities. • MR8847-01 (64MW memory, main unit only) • MR8847-02 (256MW memory, main unit only) • MR8847-03 (512MW memory, main unit only) * Main unit MR8847-01/ -02/ -03 cannot operate alone. You must install one or more optional input modules in the unit.

Created on: 17 May 2014

Wide band 1mHz to 200kHz Chemical Impedance Analyzer for Testing Electrochemical Components and Materials, Batteries, and EDLC Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in the testing of electronic components. The IM3590 is an advanced component tester especially suited to electrochemical impedance measurements and includes a variety of graphing functions that are needed for battery and chemical material testing. This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C Cable 9637 without hardware flow control.

Leakage Current Testing According to IEC60990, IEC60335, and other Safety Standards To ensure the safe use of electrical products, electrical safety tests such as insulation resistance, withstand voltage, ground resistance, and leakage current must always be conducted. Hioki Leakage Current Testers comply with laws and standards regarding medical electrical equipment as well as non-medical electrical equipment, and can be used to measure leakage current in all types of electrical products from computers to medical equipment. The ST5541 provides support for standard-compliant networks (excluding medical-use electrical devices). Note: The photograph portrays the Japanese version of the product. Other countries’ versions of the product lack the outlet on the front panel. Note: For applications involving leak current measurement of medical-use electrical devices, use the ST5540.

DC, 0.5 Hz To 1 MHz, 6-Channel 3-Phase 4-Wire Power Meter with Direct and Clamp Sensor Input Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The 3193-10 is a 6-channel power meter for testing any type of circuit ranging from single-phase lines to three-phase four-wire lines. Based on the voltage, current, and active power measurements, the power meter calculates and displays reactive power, apparent power, power factor, phase angle, and efficiency. It also provides a wide range of measurement functions including frequency measurement function, peak measurement function, current integration, active power integration, analog outputs, monitor outputs, and optional harmonic analysis/flicker functionality. Note: Main unit 3193-10 cannot operate alone - please purchase an input unit Model 9600 to 9605 for factory installation prior to shipment. All subsequent input unit replacements or expansions must be conducted at HIOKI for an additional service charge.

Created on: 17 May 2014

World’s First Non-Metallic Contact Voltage Tester Measures 600V With Optimal Safety Hioki leads the industry in non-metallic contact test and measurement technology that promotes safety on the worksite. The 3258 is a line voltage tester that employs a coupling capacitance cancellation method to measure voltage in AC circuits without requiring metal-to-metal contact. Voltage can be measured safely at practically any location, on either insulated or exposed metal conductors.

Created on: 17 May 2014

Semiconductor Package Board Testing System Utilizing Index Table Method The 1231-11 is an IC package board tester that features high-precision, large-pin capabilities for high-density, fine-pitch boards.

Created on: 17 May 2014

Wireless Multi-channel Data Logger Captures Up to 105 Data Points via Bluetooth® Hioki Memory HiLoggers are high-speed data loggers for recording multiple chanels of voltage, temperature, resistance or humidity signals, some models providing complete isolation between channels and strong noise resistance. The LR8410-20 is an innovative wireless logging system capable of capturing up to 105 channels of data wirelessly using Bluetooth® technology. • LR8410-20 (Main unit with LCD screen) • LR8510 (15 channels input module) • LR8511 (15 channels input module) The LR8410-20 alone is not capable of making measurements. One or more input modules are necessary to measure. The main unit and input modules are not bundled with the Battery Pack Z1007. Thermocouples are not provided by HIOKI, and must be purchased from a separate vendor. Note: Use only HIOKI SD Memory card, which is manufactured to strict industrial standards, for long-term storage of important data. Correct operation of non-HIOKI SD cards or USB memory sticks are not guaranteed.

32-channel Power Source Unit for the SM7810 Super Megohm Meter to Improve MLCC Testing Efficiency The SM7860 series allows for setting the dual-line output voltage on 8 channels or 16 channels, and enables up to 32-channel of output. The Hioki SM7860-07/-27 is a 32-channel, 10V discharge power source for the Hioki SM7810 Super Megohm Meter, providing positive and negative polarities required for MLCC test lines. The Power Source Unit SM7860 Series are produced to order. Select a power source unit combining positive and negative power source (1 kV/500 V), discharge, and low-voltage power source (10 V) modules to build a power source ideal for the leakage current test systems.