Hioki Memory Hicorder 8826

32-channel, High-speed Waveform Memory Recorder with Built-in Printer Provides Simultaneous Data Acquisition of 32 Different Signals

Hioki Memory HiCorders are high-speed waveform monitoring and recording devices that can simultaneously measure multiple physical phenomena such as voltage, current, temperature, vibration, weight, acceleration and rotation due to complete isolation between channels and from each channel to the ground. More than just an oscilloscope, the 8826 data acquisition (DAQ) recorder accommodates plug-and-play input modules to meet applications such as trial runs after the scheduled maintenance of railway cars to verify for voltage command signals, motor current, car speed, and brake pressure.

* Main unit 8826 cannot operate alone. You must install one or more optional input modules in the unit.

Simultaneous sampling, display and recording of all 32 analog and 32 logic channels
• High resolution of 12-bit, 1 M-sampling /second
• B4-size (paper width 264 mm) wide printer
• Large capacity memory of max. 16M-words. Memory expandable four times (option)

Basic specifications (Accuracy guaranteed for 1 year)

Number of input Units Max. 16 units
Number of channels 32 analog channels + 32 logic channels (Isolated analog channels, isolated input and frame, logic has common GND)
Measurement ranges 5 mV to 20 V/div, 12 ranges, resolution : 1/80 of range (using the 8936)
Full-scale: 20 div (Normal), 24 div (Wide)
Max. allowable input 400 V DC (using the 8936)
Frequency characteristics DC to 400 kHz (±3dB, using the 8936)
Time axis (MEMORY) 100 µs to 5 min/div, 20 ranges, Sampling period: 1/100 of range (100 points/div resolution), External sampling possible
Measurement functions Memory recorder, Recorder, X-Y recorder, RMS recorder (50/60 Hz or DC only), Recorder and memory, FFT
Memory capacity 12-bits × 4M-words/ch (using 4 Analog channels) to 500k-words/ch (using 32 Analog channels), Note: Memory capacity can be expanded 4 times
Removable storage PC card type III slot × 1, Flash ATA (up to 2GB), FD drive (MS-DOS)
Interfaces (option) GP-IB: using the 9558 GP-IB card. Note: Model 9558 has been discontinued; new GP-IB applications are not supported.
RS-232C: using the 9557 RS-232C card. Note: Model 9557 has been discontinued; new RS-232C applications are not supported.
LAN: using a HIOKI-tested LAN card. Note: The LAN card from HIOKI has been discontinued; new LAN applications are not supported.
Printing 264 mm (10.39 in) × 30 m (98.43 ft), thermal paper roll, Recording speed : Max. 25 mm (0.98 in)/sec
Display 10.4 inch TFT color LCD (640 × 480 dots)
Power supply 100 to 240 V AC, 50/60 Hz, 300 VA max. (at use with the 8936 16 units), 100 VA at printer OFF
Dimensions and mass 401 mm (15.79 in) W × 235 mm (9.25 in) H × 382 mm (15.04 in) D, 11 kg (388 oz) (main unit only)
Accessories Power cord × 1, Printer paper × 1, Protective cover × 1, Roll paper attachment × 2, PC card protector ×1, Connection cord label × 1, Instruction Manual × 1, Application Disk (Wave Viewer Wv, Communication Commands table) × 1


Ask about this product