METER MALAYSIA DISTRIBUTOR | MEASURE BETTER | WWW.METERMALAYSIA.COM

• Isolated Input Protection of 350Vp-p between any two inputs.
• Highly accurate thermometer with thermocouple
  K, J, E, T, R, S, N, L, U, B, C types.
• 4 input function T1/T2/T3/T4 temperature display.
• Programmable Hi – Lo alarm for 4 inputs.
• Display of MAX, MIN, MAX–MIN and AVG values of 4 inputs.
• Independent Input Setup
  (type of thermocouple,Hi – Lo alarm values).
• Memory and Read function (99 sets)
• 512KB auto datalogging capacity.
• USB interface.

• 0.1 ℃/0.2 ℉ Resolution
• -35 ℃ ~ 500℃ (-31 ℉ ~ 932 ℉ )
• Built-in Laser Targeting / Backlight LCD display
• MAX / MIN function
• Data memory and read function
• Dual thermometer and Dual display (1327K)
• Audible and visible alarm (1327/1327K)
• Emissivity adjustable (1327/1327K)

Milli-Ohmmeter

• Best resolution 1μΩ. Accuracy 0.05%
• 5A (120 mΩ) max. test current.
• Manual or Auto Range.(There are 6 ranges of current measurement, and furthermore 3 ranges in each current range.)
• Measurement of resistive and inductive materials (Two terminal measurement; Four terminal Kelvin measurement)
• Programmable Hi-Lo alarm with memory of 20 data.

Luminous Flux Meter

• I-V Curve Test for Solar Cell.
• Maximum Solar Power (Pmax) Search by Auto-scan (60V, 6A)
• Maximum Voltage (Vmaxp) at Pmax
• Maximum Current (Imaxp) at Pmax
• Voltage at open circuit (Vopen)
• Current at short circuit (Ishort)
• I-V curve with cursor
• Optional printer (model: 300XP) to hardcopy I-V curve
• Calculation of Efficiency (%)
• Manual single point test

• User calibration factor setting function.
• End-mount light sensor.
• Select either W/m2 or Btu / (ft2*h) units
• Data Hold / MAX / AVG modes.
• Data Memory and Read function. (99 sets.)
• Auto Data memory and RS232 interface to PC.

• Portable Field Printing for Certificate
• Text and Graphics
• Two Selectable Fonts (5*7 and 8*16)
• Programmable text Header and Footer
• Battery and AC Power Adaptor
• RS-232C Interface (Optional RS-232C to USB Bridge)
• Fixed Interval Continuous Printing(5, 30, 60, 300 seconds)

• 5 Digits LCD Display
• Light Reflex Measurement
• Range 10.00 to 99,999 RPM
• Measuring Distance 50 to 300mm
• Event counter with elapsed time
• RM-1502 optional Contact Adaptor
• Max / Min / Hold : True Average
• Auto Range RPM
• RS-232 Interface for Model RM-1501
• Contact RPM and circumferential velocity measurements in one simple adaptor(RM-1502)

• Sensitive and Accurate
• Ergonomic and easy-to-use design
• Large 4 digits LCD (Liquid Crystal Display)
• 1.8 meters coiled cable and mounting nut for long extension
• Low power consumption
• Hold/Max/Min/Ave functions
• Build-in low battery indicator
• Smart Auto-Power-Off (10 minutes)
• RS-232C Interface with PC (AVM-303)
• Optional Thermal Printer PROVA 300XP (AVM-303)

• Flow (CFM,CMM)
• Instant, Ave, 2/3max Flow Measurement
• Velocity m/s, ft/min, knots, Km/hr, mph
• LCD Dual Display
• ℃ / ℉

• Sensitive for low/high air velocity
• Ergonomic Design
• 0.3~45m/s range

• Sensitive and Accurate
• Ergonomic and easy-to-use design
• Large 4 digits LCD (Liquid Crystal Display)
• 1.8 meters coiled cable and mounting nut for long extension
• Low power consumption
• Hold/Max/Min/Ave functions
• Build-in low battery indicator
• Smart Auto-Power-Off (10 minutes)
• RS-232C Interface with PC
• Optional Thermal Printer PROVA 300XP
• Air temperature measurement

• 94dB and 114dB Sound Calibration at 1KHz
• Accurate and Simple to use
• Fits 1", 1/2" or 1/4" diameter microphone

• 4-20mA, 0-20mA, 0-24mA with 1 mA resolution
• 0-100mV with 10 mV resolution
• 0-12V with 1mV resolution
• Thermocouple K, J, E, T Type (1℃, 1℉ resolution)
• Frequency 2 - 50,000Hz

• Simple & Easy to key-in the exact temperature value you need
• Dual LCD display to show the Reference
  Room Temperature at the same time
• Accept 11 different type of Thermocouple
  (K, J, E, T, R, S, N, L, U, B, C)
• Auto-Ramp & T function

• 4-20mA, with 1 μ A resolution
• Basic Accuracy 0.025% + 5 μ A
• Auto-Ramp and Easy Step Functions
• 1-100% Input
• 0-20mA, 0-24mA Selectable
• Easy Just-Type-in Number Operation

• CO 2 : 0 ~ 6,000 ppm range, Diffusion sampling mode.
• Three LCD Display for CO 2 , %RH Humidity and Air Temperature.
• Maintenance free dual wavelength NDIR infrared CO 2 sensor (non-dispersive infrared).
• Continuous or manual data logging (20,000 sets).
• Data hold & Maximum / Minimum with Time stamp.
• Data Memory and READ function.
• Alarm and Time setting.
• RS-232 function / Software.
• Backlight display function.
• Simple and safe to use.

• Test Condition Without Shutting Down Battery.
• Simultaneously Measure Battery Resistance, Voltage.
• Comparator Function.
• Rates Conditions as Pass, Warning, or Fail.
• Memory and Read Function
• Compact and Lightweight.
• RS232 PC Interface

• Test Condition Without Shutting Down Battery.
• Simultaneously Measure Battery Resistance, Voltage, Current, Temperature.
• Auto-hold and Auto-data storage.
• Comparator Function.
• Rates Conditions as Pass, Warning, or Fail.
• Memory and Read Function
• Compact and Lightweight.
• RS232 PC Interface

• 0.1℃/0.2 ℉ Resolution
• Infrared: -20 ℃~500 ℃
• Thermomuople input "K": -50 ℃ ~ 1370 ℃
• Built-in Laser sighting / Backlight LCD display
• Data Memory and Read Capacity 20 sets.
• Adjustable & Visible Alarm
• MAX/MIN Reading

• Max Hold Function
• Data Hold Function
• Aux output JACKS
• T1-T2 differential measurement

\

• Type K. J. E. T. thermocouple input
• Dual channels with multi-functions (T1, T2 & T1-T2)
• Built-in thermo printer with programable time internal setting

• K/J Type thermocouple input
• Auto ranging
• Maximum / Minimum reading
• Relative reading

Multi-channels scanner
(T1-->T2-->T1 - T2)

• K/J Type thermocouple input
• Auto ranging
• Dual display LCD
• 8000 Record Data logging Capacity
• Maximum / Minimum / Average reading
• Relative reading
• RS-232 interface (software include)

• Switchable Resolution 0.1° /1.0 °
• Single/Dual Channels with Differential Measurements
• Data Hold Function

• Type "K" Thermocouple Input
• Switchable Resolution 0.1° / 1°
• With℃& ℉ switching
• Max / MIN Function
• Data Hold Function
• Room Temperature Compensated
• T1 & T2 dual points display
• T1 - T2 differential measurement
• Flip-up stand
• Backlight LCD display

• Highly accurate thermometer with thermocouple K, J, E, T, R, S, N type.
• Dual input function T1/T2 temperature display. (1314)
• Warning beeper with HI/LO setting.
• MAX/MIN with TIME, MAX–MIN AVG, HOLD function.
• ℃ / ℉ / K User-Selective.
• Back-Light LCD display.

• Highly accurate thermometer with thermocouple K, J, E, T, R, S, N type.
• Dual input function T1/T2 temperature display. (1316)
• 7500 DataLogging capacity.
• Warning beeper with HI/LO setting.
• MAX/MIN with TIME, MAX-MIN AVG, HOLD function.
• ℃ / ℉ / K User-Selective.
• Back-Light LCD display.

• Pt 3916/3926/385 RTD standard.
• 7500 DataLogging capacity. (1317)
• Warning beeper with HI/LO setting.
• Time setting.
• MAX / MIN with TIME, MAX-MIN AVG Hold function.
• ℃ / ℉ / K User-Selective.
• Back - Light LCD display.
• Dual input function T1/T2 temperature display. (1318)

• Type "K" Thermocouple Input.
• Switchable Resolution 0.1° / 1 ° .
• With ℃& ℉ switching.
• Max / MIN Function.
• Data Hold Function.
• Flip-up stand.

• Fast and Easy pH measurement
• Dual LCD display shows PH/℃& ℉ or mV/ ℃&℉ simultaneously
• Logging 99 readings

Without Datalogging/Software

The EMF tester is designed to provide user a quick, reliable and easy way to measure electromagnetic field radiation levels around power lines, home appliances and industrial devices.

With Datalogging/Software

The EMF tester is designed to provide user a quick, reliable and easy way to measure electromagnetic field radiation levels around power lines, home appliances and industrial devices.

• 50 MHz to 3.5 GHz frequency range.
• For isotropic measurements of electromagnetic fields.
• Non-directional (isotropic ) measurement with three-channel measurement probe.