"Excellent & Friendly Service. Got my item within 3 days! Ordered Kyoritsu 3125 on Webnesday and requested them to send us the goods by Saturday. I received it through CITY-LINK EXPRESS on Friday! Will buy again!" -RCE CONSTRUCTION SDN BHD
"My third deal with them. Price acceptable. Service Excellent. They have helped us to source several products that make it possible for us to fulfill our orders before deadline! Beginning I was a bit worry but they made it! My Customer-Telekom are happy with all the products! Will buy again! - As-per
"Good Service" SAAG GROUP
DELIVER BY
LAN cable tester plus (Model.No.: mTDR-030)
NanoTronix LAN Cable Tester Plus (Model No.: mTDR-030) is a combination unit that utilizes MTDR(Metallic Time-Domain Reflectometry) technology used in measuring cable distance and TCP/IP protocol analyzer for examining internal conditions of LAN communication lines.
To improve the efficiency on LAN cable management, LAN Cable TesterPlus also has a pairing check function used for pinpointing the ill connection of LAN connectors (open, short, reversed, crossed and splitted) and a tone probing function used for tracing cable in the walls, floors and ceilings.
LAN Cable TesterPlus is ideally suited for work on installation of networks and for ongoing maintenance and service to any type of paired (shielded or twisted) metallic cables such as category 5/6 UTP cables, Telephone lines, Coaxial cables and LAN systems. Its' all-in-one testing capabilities meets the needs of every cable contractors, installers and technicians at lowest cost.
LAN Cable TesterPlus is housed in a rugged ABS enclosure designed to deliver water-resistant performance and provides technicians with the added convenience of being hand-held. It is powered by four AA(NEDA 15A or LR6) batteries, which are stored in a compartment on its back.
- Service of the environment of static IP address or DHCP(Dynamic Host Configuration Protocol)
- Service of assigning MAC address by itself
LAN cable fault detection for open, shorted, crossed, split and reversed pair
Overload voltage protection: displays "OUCH" alert message with sound when line voltage exceeds 6.5V
Built-in tone generator for cable tracing & identification (910 to 1100 Hz with 5V peak to peak)
Auto fitting function for the various cable measurement
Extra-large backlit (icon type 7 segment) LCD
Easy-to-use test modules
20 additional library memory spaces for new VOP settings
Low power consumption with long battery life : 5,000 tests
Specifications
Dimensions
Height
235mm
Depth
44mm
Width
100mm
Net Weight
450g
Interface
Connector type
RJ45 & BNC
LCD display
Extra-large backlit(ICON type 7 segment) LCD
Performance
Measurable cable
UTP Cable ( CAT 3, 4, 5, 5e & CAT 6 ),
Coaxial and Telephone cable
Measurement range
300m (984ft)
Minimum display resolution
5cm
Accuracy
±1% of reading ±10cm(4in)
TCP/IP protocol analysis
Service of the environment of static IP address or DHCP(Dynamic Host Configuration Protocol)
Service of assigning MAC address by itself
LAN pair check
Open, Short, Crossed, Split, Reversed pair
Additional library
20 library memory spaces for new VOP settings
VOP
Adjustable from 1.0% to 99.9%(in 0.1% step)
Tone Generation
1kHz, 5V pulse
Free inductive probe allows you to verify cable's continuity and
trace the cable in walls, floors and ceilings
Automatic power off
30minutes with no key touched
Automatic output impedaence
25,50,75,100,125 or 150Ω
Power Supply
Battery
4LR6(LR6)
Battery life
Approx. 5,000 tests
Safety
EMC
BS/EN 61326-1
Safety
Complies with IEC 61010-1
Environment
Operating temperature
-18℃~60℃
Storage temperature
-20℃~70℃
Humidity
85% at 35℃
Applications
UTP cable (CAT 3/4/5/5e/6)
Telephone line and coaxial cable
Any paired (shield or twisted) metallic telecom cable
NanoTronix LAN Cable Tester (Model No.: mTDR-020) is primarily designed for LAN installer, cable wholesalers, retailers, contractors, electricians, cable installers and alarm installers who need to troubleshoot and measure individual line faults (open and short), pairings, and their distances.
Accessories
Standard Accessories
①
Soft carrying case
②
Alligator clip
③
IRJ45-RJ45 female coupler
④
RJ45 to RJ45 patch cabler
⑤
Female RJ45 to female BNC
(Remote identifier #1 only)
(Please call our office to make an appointment if you decide to come)
Johor Office : See Map Suite 3, 9th Floor, Wisma Sing Long, 9 Jln Zabedah, 83000 Batu Pahat, Johor, MY.
Tel(Johor) :
+60 7-4352540,4355540 Fax(Johor):
+60 7-4347299
Email:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
Office hour(Johor): Mon-Fri 9am to 6pm, Sat 9am-1pm
"How can we help you?"
Salesperson:Siti,Hui Hui ,Steven,Yusof, Syafiq
Features
Specifications
Applications
Accessories
Standard Accessories 
Optional Accessories 
