"Excellent & Friendly Service. Got my item within 3 days! Ordered Kyoritsu 3125 on Webnesday and requested them to send us the goods by Saturday. I received it through CITY-LINK EXPRESS on Friday! Will buy again!" -RCE CONSTRUCTION SDN BHD
"My third deal with them. Price acceptable. Service Excellent. They have helped us to source several products that make it possible for us to fulfill our orders before deadline! Beginning I was a bit worry but they made it! My Customer-Telekom are happy with all the products! Will buy again! - As-per
"Good Service" SAAG GROUP
DELIVER BY
LAN cable tester (Model.No.: mTDR-020)
The LAN Cable Tester (Model No.:mTDR-020) is the ideal instrument for both LAN and cable network management. It combines the best of the LAN Cable Tester (Model No.:mTDR-020)'s cable measurement technologies with additional features that enable technicians to troubleshoot during LAN installation and maintenance.
Introduction
NanoTronix LAN Cable Tester (Model No.: mTDR-020) is a pocket sized and easy-to-use LAN cable tester which is the ideal instrument for those managing LAN and metallic telecom cable networks with lowest cost. Nanotronix LAN Cable Tester provides accurate measurement for locating faults and measuring the length of any type of paired (shielded or twisted) metallic cables such as category 5/6 UTP cables, Telephone and Coaxial cables.
Together with the fault or length measurement, NanoTronix LAN Cable Tester pinpoints ill-pairings of LAN cables: open, short, reversed, crossed and split pairs. Nanotronix LAN Cable Tester also offers the office Identifier which allows users to find the termination of office cable drops in wiring closets (optional office Identifier plugs required). This feature provides a favorable environment for office network installation with hubs. Tone generating function and included free inductive probe allows users to verify cable's continuity and trace the cable in walls, floors and ceilings.
Rugged and affordable NanoTronix LAN Cable Tester is the ideal tool for on-the-spot cable testing. It is the all-in-one LAN cable tester which meets the needs of every cable contractors, installers and technicians at lowest cost.
NanoTronix LAN Cable Tester is housed in a rugged ABS enclosure which is dust and weatherproof to IP 42. The instrument also comes with a soft carrying case and alligator clip adapter. It is powered by four AA (NEDA 15A or LR6) batteries, which are stored in a compartment on its back.
Low cost numeric LAN Cable Tester
Suitable for any type of double insulated metallic cables, coaxial and category 5/6 LAN wiring
LAN cable fault detection for open, shorted, crossed, split and reversed pair
Overload voltage protection: displays "OUCH" alert message with sound when line voltage exceeds 6.5V
Internal VOP library 39 standard cable types
Built-in tone generator for cable tracing & identification (910 to 1100 Hz with 5V peak to peak)
Automatic VOP calculation
Free standalone inductive probe
Extra-large backlit (icon type 7 segment) LCD
One remote identifier for wiremapping
Safety protection (up to 250V RMS)
CE & FCC certified
Specifications
Dimensions
Height
235mm(9.2")
Depth
44mm(1.7")
Width
100mm(3.9")
Net Weight
486g(17oz)
Interface
User interface
Extra-large backlit(ICON type 7 segment)LCD
Internal library
39 standard cable types
Additional library
20 library memory spaces for new VOP settings
V.O.P
Adjustable from 1% to 99%(in 1% step)
Performance
Maximum range
300m (984ft)
Minimum display resolution
5cm(2in)
Accuracy
± 1% of reading ±10cm(4in)
Automatic power off
30minutes with no key touched
Automatic output impedaence
25,50,75,100,125 or 150Ω
Power Supply
Battery
4LR6(AA)
Battery life
5,000 tests
Safety
EMC
BS/EN 61326-1
Safety
Complies with IEC 61010-1
Environment
Operating temperature
-18℃~60℃ (0℉~140℉)
Storage temperature
-20℃~70℃ (-4℉~158℉)
Humidity
85% at 35℃ (95℉)
Applications
UTP cable (CAT 3/4/5/5e/6)
Telephone line and coaxial cable
Any paired (shield or twisted) metallic telecom cable
NanoTronix LAN Cable Tester (Model No.: mTDR-020) is primarily designed for LAN installer, cable wholesalers, retailers, contractors, electricians, cable installers and alarm installers who need to troubleshoot and measure individual line faults (open and short), pairings, and their distances.
(Please call our office to make an appointment if you decide to come)
Johor Office : See Map Suite 3, 9th Floor, Wisma Sing Long, 9 Jln Zabedah, 83000 Batu Pahat, Johor, MY.
Tel(Johor) :
+60 7-4352540,4355540 Fax(Johor):
+60 7-4347299
Email:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
Office hour(Johor): Mon-Fri 9am to 6pm, Sat 9am-1pm
"How can we help you?"
Salesperson:Siti,Hui Hui ,Steven,Yusof, Syafiq
Introduction
Specifications
Applications
Accessories
Standard Accessories
Optional Accessories
