"Excellent & Friendly Service. Got my item within 3 days! Ordered Kyoritsu 3125 on Webnesday and requested them to send us the goods by Saturday. I received it through CITY-LINK EXPRESS on Friday! Will buy again!" -RCE CONSTRUCTION SDN BHD
"My third deal with them. Price acceptable. Service Excellent. They have helped us to source several products that make it possible for us to fulfill our orders before deadline! Beginning I was a bit worry but they made it! My Customer-Telekom are happy with all the products! Will buy again! - As-per
"Good Service" SAAG GROUP
DELIVER BY
BW Gas Alert Micro 5 IR 5 Gas Multi-Gas Detector
BW Gas Alert Micro 5 IR 5 Gas Multi-Gas Detector
Monitor up to 5 gases simultaneously
Infrared sensor to monitor for CO2
IP66/67 rating for moisture/dirt protection
Concussion-proof boot for greater durability
Optional attachable/removable sampling pump
GasAlertMicro 5 IR uses a non-dispersive infrared sensor to monitor carbon dioxide levels while simultaneously monitoring and displaying up to four additional atmospheric hazards including O2, LEL and a range of toxic gases.
Compact and lightweig ht, the GasAlertMicro 5 IR comes housed in a highly concussion-proof enclosure. Audible, visual and vibrator alarms activate in the event of a Low, High, TWA or STEL alarm condition. An optional motorized pump is available for remote sampling.
Beyond standard BW portable instrument features such as confidence beep, full function self test, automatic calibration and pass-code protection, the GasAlertMicro5 IR offers an extended selection of user-settable field options including: stealth mode, backlight options, selectable ppm resolution, STEL/TWA measurement choice, combustible correction factors, user-settable calibration gas concentrations, multi-language support.
Supported Gases:
H2S - hydrogen sulfide
HCN - hydrogen cyanide
CO - carbon monoxide
Cl2 - chlorine
O2 - oxygen
ClO2 - chlorine dioxide
SO2 - sulfur dioxide
O3 - ozone
PH3 - phosphine
LEL combustibles
NH3 - ammonia
CO2 - carbon dioxide (through IR)
NO2 - nitrogen dioxide
Protect Yourself
Smaller and over 50% lighter than competitive instruments
Water-resistant design in an integral concussion-proof enclosure
Continuous LCD shows simultaneous gas concentrations for five gases
0 - 1000 ppm measurement of VOCs (Volatile Organic Compounds)
Integral motorized pump option for remote sampling
Two power options: AA alkaline or rechargeable hot-swappable battery pack
Provides 95 dB alarm tone and two bright wide-angled alarm bars
Equipped with internal vibrating alarm for high noise areas
Multi-language support in English, French, German, Spanish, and Portuguese
Three backlight options: standard- activates in low light (auto), in alarm (auto) and reactivates on-demand; alarm only- activates in alarm conditions and reactivates on-demand; stealth mode
Four alarm levels: instantaneous Low and High Alarm for all gases; TWA (time-weighted average) and STEL (short-term exposure limit) for VOCs and toxic gases
Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
Records TWA, STEL, and maximum exposures to gas and displays readings on command
User selectable field options include: PID correction factor, language selection, confidence beep, span level, set TWA/STEL calculation choice, set calibration due date, pass code protection, latching alarm, 'SAFE' display function, stealth mode, and selectable ppm resolution for some gases (e.g. SO2 0.1 ppm)
Full function self-test of: sensor, battery and circuit integrity; and audible/visual alarms
2 months of continuous data at 5 second intervals via 32 MB Flash MMC card (64 MB and 128 MB cards also available); when full, the wrap-around feature replaces oldest data with most recent data
Auto zero:
Yes
Calibration:
Automatic
Backlight:
Standard Mode:
low light (auto); alarm condition (auto); reactivation on demand
Alarm Only Mode:
alarm condition (auto); reactivation on demand
Stealth Mode:
backlight inactive; audible and visual alarms silenced
Sensor:
PID (VOC) 10.6 eV lamp; plug-in, electrochemical cell (toxic and oxygen); catalytic (LEL)
User field options:
Confidence beep, set STEL period, force calibration on start-up, enable / disable sensor, pass code protection, latching alarms, span level, passed calibration user-lockout option, “SAFE” display function, stealth mode, fast pump, oxygen auto-cal on start-up, alarm only backlight mode, combustible gas measurement (% LEL or % by volume methane), LCD language option, STEL calculation choice, TWA calculation choice, PID / combustible correction factor options, user-settable calibration gas level, high resolution, clock
Pump:
Tubing length up to 100 ft. / 30 m (50 ft. / 15 m standard) with user options
ALARM INDICATORS:
Clearly advises alarm conditions with audible, visual, and vibrator alarms
Visual alarms:
Two fl ashing alarm bars visible from all angles LCD indicates gas present and alarm levels encountered
Audible alarm:
Typically 95 dB at 1 ft. / 30 cm variable pulsed audible alarm
Vibrator alarm:
Pulses warning in gas alarm conditions, or for any status alarms
Status alarms:
Low battery, over range, multiple gas / pump and failed or missing sensor
ALARM LEVELS:
Instantaneous Low Alarm for all gases; Instantaneous High Alarm for all gases; TWA (time-weighted average) and STEL (short-term exposure limit) for toxics/VOCs
LCD:
Continuous, alphanumeric gas readout and status display advises.
Simultaneously and continuously displays gas concentration(s) for all sensors (in ppm, % LEL, or % v/v) Peak (max)/STEL/TWA ppm or %: Records exposures and displays on demand
Alarm setpoints:
Displayed on activation and on demand
Calibration due date:
Days remaining on start-up
Clock:
Real-time clock setting displayed on start-up
TESTS:
Full function self-test:
Sensor integrity, circuitry, battery and audible/visual alarms on activation
Battery:
Continuous
GENERAL SPECIFICATIONS:
Rugged, composite material; two-shot molded polymer case with integral anti-shock boot
Operating temperature:
14 to 104oF / -10 to 40oC VOC (PID); -4 to 122oF / -20 to 50oC other gases
Humidity:
0 - 95% RH (non-condensing)
EMI/RFI:
Complies with EMC Directive 89/336/EEC
Protection:
Highly water resistant and dust proof housing
Battery Options:
12 hours on three AA alkaline cells or 10 hours on rechargeable “hot-swappable” battery pack when equipped with PID, oxygen, combustible and TwinTox (H2S/CO) sensor
Size:
5.7 x 2.9 x 1.5 in. / 14.5 x 7.4 x 3.8 cm
Weight:
13.1 oz. / 370 g
WARRANTY:
Full 2-year warranty including all sensors (1 year PID lamp and NH3 sensor)
DATALOGGER OPTIONS:
User-downloadable datalogger
Data recorder:
All events and occurrences (calibration zero adjustment, calibration span adjustment, gas readings, TWA, STEL, alarm condition, failures detected by the microprocessor).
Sampling rate:
Factory set at 5-second intervals and user-settable from 1 to 127-second intervals
(Please call our office to make an appointment if you decide to come)
Johor Office : See Map Suite 3, 9th Floor, Wisma Sing Long, 9 Jln Zabedah, 83000 Batu Pahat, Johor, MY.
Tel(Johor) :
+60 7-4352540,4355540 Fax(Johor):
+60 7-4347299
Email:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
Office hour(Johor): Mon-Fri 9am to 6pm, Sat 9am-1pm
"How can we help you?"
Salesperson:Siti,Hui Hui ,Steven,Yusof, Syafiq
