• Quickly check for the presence of ac voltages, with no electrical contact
• Safe non-contact detection of voltages from 70 V to 440 V ac
• Both visible and audible indicators
• Detector emits loud audible chirping that changes pitch based on probes proximity to the ac voltage source
• Bright flashing LED also indicates presence of ac voltage
• Batteries included

VT101

• Bright neon light indicates ac voltage
• Identify ac Voltage from 90-500 V ac
• No battery needed
• Tests 2 wire and 3 wire ac outlets

VT102

• 4 Bright neon lights indicate ac voltage
• 4 Ranges indicated from 110 V to 460 V ac
• No battery needed
• Tests 2 wire and 3 wire ac outlets
  

ST101

• Fast, easy socket test
• Easy to read light indicators
• Confirm proper wiring and operation of ac socket
• GFCI circuit trips to confirm tester is working
• For use on 110-125 V ac

ST102

• Test GFCI breakers for proper wiring and operation
• Easy to read light indicators show common wiring problems
• Confirm GFCI socket is wired for protection
• GFCI circuit trips to confirm tester is working
• For use on 110-125 V ac

The FG2C function generator allow wide ranging versatility at an affordable price. It provides a substantial array of output capabilities and is extremely reliable for heavy day-to-day usage in electronic troubleshooting, production manufacturing test or as a breadboarding signal source.

• Supplies all the basic test waveforms for fast, easy push-button selection of square, triangle and sine waves plus TTL or CMOS pulse output with low impedance, low distortion output.
• Smooth, analog knob dials frequency between 0.3Hz and 3MHz.
• Vary the output from less than 20mVp-p to 20Vp-p open circuit (10Vp-p max 50W load).
• Duty cycle control allows for setting pulses positive or negative.
• The Variable controlled frequency (VCF) input allows external control for generating sweep signals.
• 2 switchable 20 dB attenuators
• Variable DC offset control
• Signal polarity invert button
• Ships with both 117V and 220V line cords and fuses 

The LCR55 is a full size component checker that measures inductance, capacitance, resistance, transistors, diodes and microwave diodes. Wide measurement ranges with precise resolution at the lowest ranges. Includes protective holster and test leads with threaded alligator clips.

• Measures inductance, capacitance, resistance, transistors, diodes and microwave diodes
• Plug-in test slots and test leads with alligator clips
• Oversized, read-at-a-glance display
• Data Hold and Max Hold to freeze measurement on the display
• Auto-off to save battery life

Anemometer with flexible precision vane

• Measure air velocity FPM or air volume CFM
• Input surface area for air flow measurements
• Flexible vane sensor
• Accurate Thermistor for temperature measurements
• Continuous moving average results for up to 2 hours
• MIN/MAX/AVG readings
• Air velocity average for multiple point
• Temperature in °C or °F, switchable
• Data hold to freeze measurement display of both readings
• Auto power off function
• RS232 interface output with optional software and cable, Model TM-SW
• Deluxe hard carrying case 

Dual input digital thermometer with triple display

• High accuracy, multiple type input thermometer
• Ideal for HVAC/R technicians, electricians, research, industrial process, quality control
• Dual inputs for easy super-heat and sub-cool temperature measurements
• Dual channel real time data acquisition with RS232 output with optional software and cable, Model TM-SW
• Measures to 3200 °F/1760 °C
• Accepts Type J, K, T, R, S, E inputs
• Relative time stamp feature
• Triple display of T1, T2, T1 – T2, and relative time stamp
• Backlight
• Deluxe hard carrying case, two Type K probes

The FG3C function generator allow wide ranging versatility at an affordable price. It provides a substantial array of output capabilities and is extremely reliable for heavy day-to-day usage in electronic troubleshooting, production manufacturing test or as a breadboarding signal source.

• Provides sine, square, triangle waves and TL and CMOS pulse outputs from 0.3 to 3MHz.
• A built-in frequency counter with 6 digit display accurately shows frequency setting.
• Can be used as stand-alone frequency counter for external signals from 5 to 150MHz.
• Control the linear or logarithmic sweep of any of the selected signal outputs internally or with user provided external modulating signal.
• Variable duty-cycle, produce TTL or CMOS pulses with the duty cycle function.
• Switchable 20dB attenuator allows for low level signal output.
• Amplitude or frequency modulation
• Voltage controlled frequency (VCF) input
• Signal polarity invert button
• Variable DCV offset
• Ships with both 117V and 220V line cords and fuses

The AC71 is an AC digital clampmeter with complete multimeter function measuring AC/DC volts, resistance, continuity. It comes with two additional unique feature: AutoTect and automatic backlight.

The AutoTect feature automatically senses what type of measurement is being made when the test leads are placed across measurement point. The automatic backlight has a sensor that recognizes when the ambient light becomes dim and turns itself on.

• Easy one-button operation
• AC Current to 600A
• 750Vac and 1000Vdc
• Conductor size 32mm

SPECIAL PRICE FOR AC71
S$120* (usual S$180)

*Special price is valid while stock lasts and subjected to GST @ 5%

AC clamp multimeter for electrical and HVAC applications

• Three tools in one: clamp meter, multimeter, thermometer
• Digital thermometer 1000 °F (538 °C), Type K probe include
• AC/DC 750 V/1000 V
• 40 MW resistance
• Low DC µAmps for flame rod detector testing
• Capacitance to 4000 µF for motor run/start testing
• Continuity beeper
• 4000-count large digit display
• Auto power off
• Low battery indicator
• Full overload protection
• CAT II 1000 V, CAT III 600 V safety rated
• One-year warranty

Basic functions for automotive, residential, and education applications. The 30XR is a manual ranging digital multimeter with non-contact voltage detector and battery test.

• Innovative, non-contact voltage detector safely indicates the presence of dangerous live voltage
• Magne-Grip™ holster with magnetic hanging strap frees both hands for work
• Safety rated at CAT II 600 V, CAT III 300 V, UL listed and OSHA compliant
• 9 ranges, 30 functions and handles most measurement needs
• Battery/fuse door designed for easy accessibility
• Includes heavy-duty test leads, manual, spare fuse and 9 V battery

For field service technicians, the 33XR has the measurement functions needed for maintenance, repair and installation of electrical, HVAC and electro-mechanical equipment.

• Temperature, frequency and capacitance for complete measurement capability
• Extended 4000 µF capacitance range for motor start testing
• Magne-Grip™ holster with magnetic hanging strap frees both hands for work
• Data hold, Peak Hold, Min/Max and REL
• CAT II 1000 V, CAT III 600 V, UL listed and OSHA compliant
• Includes heavy duty test leads and threaded alligator clips, temperature adapter, type K thermocouple, manual, spare fuse and 9 V battery

For contractors and field service technicians, the 34XR provides a true rms, autoranging meter for trouble-shooting difficult problems. 34XR features temperature, capacitance and frequency.

• True RMS for the most accurate voltage measurements
• Extended 4000 µF capacitance range for motor start testing
• Bright blue backlight for dim work environments
• Duty cycle, frequency and capacitance for complete measurement capability
• Temperature with a type K thermocouple to 1832 °F/ 1000 °C
• Magne-Grip™ holster with magnetic hanging strap frees both hands for work
• Data hold, Min/Max and bar graph for capturing quick measurement events
• CAT II 1000 V, CAT III 600 V, UL listed and OSHA compliant
• Includes heavy-duty test leads, threaded alligator clips, temperature adapter, type K thermocouple, manual, spare fuse and 9 V battery

For electronics, the 37XR is a high-resolution, true rms meter for troubleshooting electronic circuits at the bench or on the job site. The 37XR features capacitance, inductance, frequency, logic test, peak hold, dBm and backlight.

• Autoranging 10,000 count with 0.1% accuracy for the most accurate measurements
• LCR component test functions – inductance, capacitance and resistance
• Bright blue backlight for dim work environments
• CAT II 1000 V, CAT III 600 V and UL listed
• Magne-Grip™ holster with magnetic hanging strap frees both hands for work
•  Min/Max, Avg, Rel and Data Hold
• Includes heavy-duty test leads with threaded alligator clips, manual, spare fuse and 9 V battery

For Engineers designing and troubleshooting industrial automation and control systems, the 38XR delivers the highest safety rating available – CAT IV 600 V and CAT III 1000 V. The features include temperature, capacitance, frequency, 4-20mA loop current percentage, backlight and PC interface. With the addition of 38SW software and RS232 cable, the 38XR can be used for real-time data acquisition using any industry standard Windows® PC.

• 10,000-count with high 0.25 % accuracy
• Bright blue backlight for dim environments
• Duty cycle, capacitance and frequency
• Magne-Grip™ holster with magnetic hanging strap frees both hands for work
• 4-20 mA loop current with % readout
• Temperature to 2372 °F/1300 °C type K thermocouple included
• True rms AC + DC coupled for accurate ripple measurements
• Includes heavy-duty test leads, threaded alligator clips, temperature adapter, type K thermocouple, manual, spare fuse and 9 V battery

Designed for easy carrying and more convenient one-hand operation, the DM73B pen-style meter is an ideal choice for measurements in tight spots. It is preferred by technicians for applications and measurements in areas such as wiring closets, marshalling panels, light fixtures, etc.

The DM73B is among the smallest digital multimeters on the market. The meter's Data Hold function, activated via a convenient side button, captures and holds the reading on the display for later reading so the user can concentrate on a quality connection and safe measurement. The DM73B comes with a plug-in test lead, spare tip and battery. Protective case is an available option

The analog dial AM8 is Wavetek Meterman’s multi-test solution for your small-size and low-cost requirements.

• Smallest Size
• Battery Test Function
• Fused DC Current Input
• Zero Adjust for Ohms
• EN61010-1 Design
• Holster and Battery Included

The Meterman LM631 is a portable, easy-to-use, compact sized digital light meter designed for simple, one hand operation with the measurement reading in lux or fc units. This value-priced unit offers high resolution readings and adherence to published standards for human eye response to illuminance.

• Features Measures wide range of light up to 20,000 fc or lux, front panel switchable Accurate, high resolution of 0.01 fc/lux
• Sensor dome has 45" attached cord for measurement flexibility
• Built-in CIE spectrum curve for accurate human eye response
• Peak hold and data hold
• Large 3-1/2 digit display with backlight feature
• Meets CE EN61326-1 certification for safety ratings
• Analog output for monitoring and charting
• Case is rugged valox plastic in ergonomic design for holding ease
• Battery hatch cover to easily replace batteries
• Shipped with carrying case, extra lens cover, 4 AAA batteries installed and manual

The Meterman IR610 is a portable, easy-to-use, compact-sized, digital infrared thermometer for measuring temperature in °C and °F. The IR610 utilizes non-contact technology for measuring surface temperatures from a distance. The IR610 brings the high technology of infrared temperature measurement into a value-priced thermometer.

• Features Laser pointer for accurate targeting
• Measures to 500°F (260°C), front panel switchable
• Narrow 10:1 field of view measures 1" at 10" distance
• Fixed emissivity at 0.95
• Certified to meet CE EN60825 Class II for Laser safety
• Data hold, low battery indicator, Auto Power Off
• Large 3-1/2 digit display with backlight feature
• Case is rugged valox plastic in ergonomic design for holding ease
• Battery hatch cover to easily replace batteries
• Shipped with carrying case, four AAA batteries installed and operator's guide

The IR608 is an infrared thermometer with a laser pointer for easy targeting. A quick and effective diagnostic tool for identifying problems in a wide variety of applications like HVAC/R, fire safety and protection, industrial maintenance automotive and quality control. The IR608 is robust yet lightweight with a solid ergonomic design.

The 5XP is the right choice for residential, commercial and general troubleshooting applications.

• 27 ranges/10 functions – a complete performance, general purpose digital multimeter
• VolTect™ Non-Contact Voltage Detector lets you instantly identify dangerous AC voltage
• Magne-Grip™ holster with magnetic strap frees both hands for work
• 2000-count 3-1/2 digit display
• 750 V ac/ 1000 V dc – highest voltage rating in this class of meter
• Resolution provides more precise measurements
• Resistance and continuity for troubleshooting bad connections
• Battery load test with 1.5 volt and 9 volt capabilities
• Min/Max records minimum and maximum values
• Data Hold freezes display to “hold” measurement reading

The 15XP is the right choice for electronics engineers, technicians and field service.

• Autoranging display for faster measurements
• 2000-count 3-1/2 digit display
• VolTect™ Non-Contact Voltage Detector lets you safely detect dangerous AC voltages
• Magne-Grip™ Holster with magnetic hanging strap that frees both hands for work
• TTL logic test for digital circuits
• Integrated tilt stand for easy bench use
• Resistance and continuity for troubleshooting bad connections
• Diode test for component level troubleshooting
• Data Hold freezes display to “hold” measurement reading
• 750 V ac/1000 V dc – highest voltage rating in this class of meter

The 35XP is the right choice for HVAC, plant maintenance technicians and residential electricians.

• VolTect™ Non-Contact Voltage Detector
• Magne-Grip™ Holster
• 4000-count resolution
• Temperature measurement capability to 1000 °C/1832 °F (Type K thermocouple included)
• 750 V ac/1000 V dc – highest voltage rating in this class of meter
• Capacitance for motor run/start test capacitance
• 0.1 µA resolution for flame sensor testing
• Frequency to 20 MHz
• Resistance to 20 MΩ
• Continuity beeper
• Data Hold freezes display

Immersion probe pocket thermometers with protective cover

• Farhenheit and Celsius versions
• 0.1°F / 0.1°C resolution
• Easy-to-read digital display
• Data hold to freeze display
• Long battery life, 200 hours typical
• Battery included, 3 V coin cell
• Temperature ranges -50 °F to 400 °F (-50 °C to 250°C)
  Emersion probe tip
• Protective probe sleve with pocket clip
• 90-day warranty

Surface probe pocket thermometers with flat surface contact

• Celsius versions
• 0.1°F / 0.1°C resolution
• Easy-to-read digital display
• Data hold to freeze display
• Long battery life, 200 hours typical
• Battery included, 3 V coin cell
• Temperature ranges -50 °F to 400 °F (-50 °C to 250°C)
• 90-day warranty

Relative humidity and temperature meter

• Relative humidity measurement from 0 to 100 %
• °F or °C selectable
• Relative function monitors humidity and temperature changes
• Large dual display of RH and temperature
• Built-in capacitive sensor with protective cover
• Complete with carrying case, battery and wet bulb chart
• Auto power off
• Min/Max/Data Hold

WE ARE A DEALER AND STOCKIST FOR:
KYORITSU, BEHA, FLUKE, MEGGER, DAGATRON, TESTO, AUTONICS, TEKTRONIX, GREENLEE, LEICA, PROVA, SANWA, GARMIN, TES, HIOKI, PROTEK, GARRET, LUTRON, AZ, ROCTEST TELEMAC,NIKON , MERTZ, MESDAN, Balmac and KESTREL Testing equipments